Add a missing offchannel condition for channel switch reason, which
bypasses DPD calibration to reduce scanning time.
Signed-off-by: Shayne Chen <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index fa3ea46..742e085 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -3212,8 +3212,10 @@ int mt7915_mcu_set_chan_info(struct mt7915_phy *phy, int cmd)
.channel_band = chandef->chan->band,
};
- if ((chandef->chan->flags & IEEE80211_CHAN_RADAR) &&
- chandef->chan->dfs_state != NL80211_DFS_AVAILABLE)
+ if (dev->mt76.hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
+ req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD;
+ else if ((chandef->chan->flags & IEEE80211_CHAN_RADAR) &&
+ chandef->chan->dfs_state != NL80211_DFS_AVAILABLE)
req.switch_reason = CH_SWITCH_DFS;
else
req.switch_reason = CH_SWITCH_NORMAL;
--
2.17.1