From: Ajay Singh <[email protected]>
Added support for 'ndo_set_mac_address call' callback to allow change of
interface MAC address.
Signed-off-by: Ajay Singh <[email protected]>
---
drivers/net/wireless/microchip/wilc1000/hif.c | 17 +++++++++
drivers/net/wireless/microchip/wilc1000/hif.h | 1 +
.../net/wireless/microchip/wilc1000/netdev.c | 38 +++++++++++++++++++
3 files changed, 56 insertions(+)
diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c
index d025a3093015..a133736a7821 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.c
+++ b/drivers/net/wireless/microchip/wilc1000/hif.c
@@ -1276,6 +1276,23 @@ int wilc_get_mac_address(struct wilc_vif *vif, u8 *mac_addr)
return result;
}
+int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr)
+{
+ struct wid wid;
+ int result;
+
+ wid.id = WID_MAC_ADDR;
+ wid.type = WID_STR;
+ wid.size = ETH_ALEN;
+ wid.val = mac_addr;
+
+ result = wilc_send_config_pkt(vif, WILC_SET_CFG, &wid, 1);
+ if (result)
+ netdev_err(vif->ndev, "Failed to get mac address\n");
+
+ return result;
+}
+
int wilc_set_join_req(struct wilc_vif *vif, u8 *bssid, const u8 *ies,
size_t ies_len)
{
diff --git a/drivers/net/wireless/microchip/wilc1000/hif.h b/drivers/net/wireless/microchip/wilc1000/hif.h
index db9179171f05..58811911213b 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.h
+++ b/drivers/net/wireless/microchip/wilc1000/hif.h
@@ -168,6 +168,7 @@ int wilc_add_rx_gtk(struct wilc_vif *vif, const u8 *rx_gtk, u8 gtk_key_len,
u8 cipher_mode);
int wilc_set_pmkid_info(struct wilc_vif *vif, struct wilc_pmkid_attr *pmkid);
int wilc_get_mac_address(struct wilc_vif *vif, u8 *mac_addr);
+int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr);
int wilc_set_join_req(struct wilc_vif *vif, u8 *bssid, const u8 *ies,
size_t ies_len);
int wilc_disconnect(struct wilc_vif *vif);
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 20615c7ec168..2a1fbbdd6a4b 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -628,6 +628,43 @@ static struct net_device_stats *mac_stats(struct net_device *dev)
return &vif->netstats;
}
+static int wilc_set_mac_addr(struct net_device *dev, void *p)
+{
+ int result;
+ struct wilc_vif *vif = netdev_priv(dev);
+ struct wilc *wilc = vif->wilc;
+ struct sockaddr *addr = (struct sockaddr *)p;
+ unsigned char mac_addr[ETH_ALEN];
+ struct wilc_vif *tmp_vif;
+ int srcu_idx;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ srcu_idx = srcu_read_lock(&wilc->srcu);
+ list_for_each_entry_rcu(tmp_vif, &wilc->vif_list, list) {
+ wilc_get_mac_address(tmp_vif, mac_addr);
+ if (ether_addr_equal(addr->sa_data, mac_addr)) {
+ if (vif != tmp_vif) {
+ srcu_read_unlock(&wilc->srcu, srcu_idx);
+ return -EINVAL;
+ }
+ srcu_read_unlock(&wilc->srcu, srcu_idx);
+ return 0;
+ }
+ }
+ srcu_read_unlock(&wilc->srcu, srcu_idx);
+
+ result = wilc_set_mac_address(vif, (u8 *)addr->sa_data);
+ if (result)
+ return result;
+
+ ether_addr_copy(vif->bssid, addr->sa_data);
+ ether_addr_copy(vif->ndev->dev_addr, addr->sa_data);
+
+ return result;
+}
+
static void wilc_set_multicast_list(struct net_device *dev)
{
struct netdev_hw_addr *ha;
@@ -813,6 +850,7 @@ static const struct net_device_ops wilc_netdev_ops = {
.ndo_init = mac_init_fn,
.ndo_open = wilc_mac_open,
.ndo_stop = wilc_mac_close,
+ .ndo_set_mac_address = wilc_set_mac_addr,
.ndo_start_xmit = wilc_mac_xmit,
.ndo_get_stats = mac_stats,
.ndo_set_rx_mode = wilc_set_multicast_list,
--
2.24.0
<[email protected]> wrote:
> From: Ajay Singh <[email protected]>
>
> Added support for 'ndo_set_mac_address call' callback to allow change of
> interface MAC address.
>
> Signed-off-by: Ajay Singh <[email protected]>
5 patches applied to wireless-drivers-next.git, thanks.
c04fabacb780 wilc1000: added 'ndo_set_mac_address' callback support
dd460e2ac05f wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
66aea5d198c3 wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
9c172f30b40b wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
339754ffdb92 wilc1000: added queue support for WMM
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches