MT7663 uses different bits for communicating reset commands/status between MCU
and host. Also add an extra initial reset command.
Signed-off-by: Felix Fietkau <[email protected]>
---
.../net/wireless/mediatek/mt76/mt7615/dma.c | 17 +++++++++++---
.../net/wireless/mediatek/mt76/mt7615/mmio.c | 23 +++++++++++++------
.../wireless/mediatek/mt76/mt7615/pci_init.c | 6 +++++
.../wireless/mediatek/mt76/mt7615/pci_mac.c | 7 +++++-
.../net/wireless/mediatek/mt76/mt7615/regs.h | 11 +++++++++
5 files changed, 53 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/dma.c b/drivers/net/wireless/mediatek/mt76/mt7615/dma.c
index 0ec1c526f583..642b4eab0d8b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/dma.c
@@ -187,14 +187,19 @@ void mt7615_dma_start(struct mt7615_dev *dev)
if (is_mt7622(&dev->mt76))
mt7622_dma_sched_init(dev);
- if (is_mt7663(&dev->mt76))
+ if (is_mt7663(&dev->mt76)) {
mt7663_dma_sched_init(dev);
+
+ mt76_wr(dev, MT_MCU2HOST_INT_ENABLE, MT7663_MCU_CMD_ERROR_MASK);
+ }
+
}
int mt7615_dma_init(struct mt7615_dev *dev)
{
int rx_ring_size = MT7615_RX_RING_SIZE;
int rx_buf_size = MT_RX_BUF_SIZE;
+ u32 mask;
int ret;
/* Increase buffer size to receive large VHT MPDUs */
@@ -269,8 +274,14 @@ int mt7615_dma_init(struct mt7615_dev *dev)
MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 1000);
/* enable interrupts for TX/RX rings */
- mt7615_irq_enable(dev, MT_INT_RX_DONE_ALL | mt7615_tx_mcu_int_mask(dev) |
- MT_INT_MCU_CMD);
+
+ mask = MT_INT_RX_DONE_ALL | mt7615_tx_mcu_int_mask(dev);
+ if (is_mt7663(&dev->mt76))
+ mask |= MT7663_INT_MCU_CMD;
+ else
+ mask |= MT_INT_MCU_CMD;
+
+ mt7615_irq_enable(dev, mask);
mt7615_dma_start(dev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c
index eaa22752e7cd..be93e7ad1279 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c
@@ -105,6 +105,7 @@ static void mt7615_irq_tasklet(struct tasklet_struct *t)
{
struct mt7615_dev *dev = from_tasklet(dev, t, irq_tasklet);
u32 intr, mask = 0, tx_mcu_mask = mt7615_tx_mcu_int_mask(dev);
+ u32 mcu_int;
mt76_wr(dev, MT_INT_MASK_CSR, 0);
@@ -128,15 +129,23 @@ static void mt7615_irq_tasklet(struct tasklet_struct *t)
if (intr & MT_INT_RX_DONE(1))
napi_schedule(&dev->mt76.napi[1]);
- if (intr & MT_INT_MCU_CMD) {
- u32 val = mt76_rr(dev, MT_MCU_CMD);
+ if (!(intr & (MT_INT_MCU_CMD | MT7663_INT_MCU_CMD)))
+ return;
- if (val & MT_MCU_CMD_ERROR_MASK) {
- dev->reset_state = val;
- ieee80211_queue_work(mt76_hw(dev), &dev->reset_work);
- wake_up(&dev->reset_wait);
- }
+ if (is_mt7663(&dev->mt76)) {
+ mcu_int = mt76_rr(dev, MT_MCU2HOST_INT_STATUS);
+ mcu_int &= MT7663_MCU_CMD_ERROR_MASK;
+ } else {
+ mcu_int = mt76_rr(dev, MT_MCU_CMD);
+ mcu_int &= MT_MCU_CMD_ERROR_MASK;
}
+
+ if (!mcu_int)
+ return;
+
+ dev->reset_state = mcu_int;
+ ieee80211_queue_work(mt76_hw(dev), &dev->reset_work);
+ wake_up(&dev->reset_wait);
}
static u32 __mt7615_reg_addr(struct mt7615_dev *dev, u32 addr)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
index a03484e34bb4..49540b00519d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_init.c
@@ -47,6 +47,12 @@ static int mt7615_init_hardware(struct mt7615_dev *dev)
if (ret < 0)
return ret;
+ if (is_mt7663(&dev->mt76)) {
+ /* Reset RGU */
+ mt76_clear(dev, MT_MCU_CIRQ_IRQ_SEL(4), BIT(1));
+ mt76_set(dev, MT_MCU_CIRQ_IRQ_SEL(4), BIT(1));
+ }
+
ret = mt7615_dma_init(dev);
if (ret)
return ret;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c
index 8cd79e849045..d20962cdecc8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c
@@ -210,7 +210,12 @@ EXPORT_SYMBOL_GPL(mt7615_dma_reset);
static void
mt7615_hif_int_event_trigger(struct mt7615_dev *dev, u8 event)
{
- mt76_wr(dev, MT_MCU_INT_EVENT, event);
+ u32 reg = MT_MCU_INT_EVENT;
+
+ if (is_mt7663(&dev->mt76))
+ reg = MT7663_MCU_INT_EVENT;
+
+ mt76_wr(dev, reg, event);
mt7622_trigger_hif_int(dev, true);
mt7622_trigger_hif_int(dev, false);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/regs.h b/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
index 190a02670795..63c081bb04d0 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
@@ -61,6 +61,11 @@ enum mt7615_reg_base {
#define MT_MCU_PCIE_REMAP_2_BASE GENMASK(31, 19)
#define MT_PCIE_REMAP_BASE_2 ((dev)->reg_map[MT_PCIE_REMAP_BASE2])
+#define MT_MCU_CIRQ_BASE 0xc0000
+#define MT_MCU_CIRQ(ofs) (MT_MCU_CIRQ_BASE + (ofs))
+
+#define MT_MCU_CIRQ_IRQ_SEL(n) MT_MCU_CIRQ((n) << 2)
+
#define MT_HIF(ofs) ((dev)->reg_map[MT_HIF_BASE] + (ofs))
#define MT_HIF_RST MT_HIF(0x100)
#define MT_HIF_LOGIC_RST_N BIT(4)
@@ -88,6 +93,10 @@ enum mt7615_reg_base {
#define MT_CFG_LPCR_HOST_FW_OWN BIT(0)
#define MT_CFG_LPCR_HOST_DRV_OWN BIT(1)
+#define MT_MCU2HOST_INT_STATUS MT_HIF(0x1f0)
+#define MT_MCU2HOST_INT_ENABLE MT_HIF(0x1f4)
+
+#define MT7663_MCU_INT_EVENT MT_HIF(0x108)
#define MT_MCU_INT_EVENT MT_HIF(0x1f8)
#define MT_MCU_INT_EVENT_PDMA_STOPPED BIT(0)
#define MT_MCU_INT_EVENT_PDMA_INIT BIT(1)
@@ -102,6 +111,7 @@ enum mt7615_reg_base {
#define MT_INT_RX_DONE_ALL GENMASK(1, 0)
#define MT_INT_TX_DONE_ALL GENMASK(19, 4)
#define MT_INT_TX_DONE(_n) BIT((_n) + 4)
+#define MT7663_INT_MCU_CMD BIT(29)
#define MT_INT_MCU_CMD BIT(30)
#define MT_WPDMA_GLO_CFG MT_HIF(0x208)
@@ -138,6 +148,7 @@ enum mt7615_reg_base {
#define MT_MCU_CMD_PDMA_ERROR BIT(27)
#define MT_MCU_CMD_PCIE_ERROR BIT(28)
#define MT_MCU_CMD_ERROR_MASK (GENMASK(5, 1) | GENMASK(28, 24))
+#define MT7663_MCU_CMD_ERROR_MASK GENMASK(5, 2)
#define MT_TX_RING_BASE MT_HIF(0x300)
#define MT_RX_RING_BASE MT_HIF(0x400)
--
2.30.1
For MT7663, the availability of the patch files is used to detect, which
corresponding firmware is going to be used (AP firmware or STA offload
firmware). If the ROM patch was already applied, it could attempt to
load the wrong firmware (without considering the alternative).
Signed-off-by: Felix Fietkau <[email protected]>
---
.../net/wireless/mediatek/mt76/mt7615/mcu.c | 30 ++++++++++---------
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 5f37255476e3..2e113fd431f5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -1341,25 +1341,26 @@ static int mt7615_load_patch(struct mt7615_dev *dev, u32 addr, const char *name)
const struct firmware *fw = NULL;
int len, ret, sem;
+ ret = firmware_request_nowarn(&fw, name, dev->mt76.dev);
+ if (ret)
+ return ret;
+
+ if (!fw || !fw->data || fw->size < sizeof(*hdr)) {
+ dev_err(dev->mt76.dev, "Invalid firmware\n");
+ ret = -EINVAL;
+ goto release_fw;
+ }
+
sem = mt76_connac_mcu_patch_sem_ctrl(&dev->mt76, true);
switch (sem) {
case PATCH_IS_DL:
- return 0;
+ goto release_fw;
case PATCH_NOT_DL_SEM_SUCCESS:
break;
default:
dev_err(dev->mt76.dev, "Failed to get patch semaphore\n");
- return -EAGAIN;
- }
-
- ret = firmware_request_nowarn(&fw, name, dev->mt76.dev);
- if (ret)
- goto out;
-
- if (!fw || !fw->data || fw->size < sizeof(*hdr)) {
- dev_err(dev->mt76.dev, "Invalid firmware\n");
- ret = -EINVAL;
- goto out;
+ ret = -EAGAIN;
+ goto release_fw;
}
hdr = (const struct mt7615_patch_hdr *)(fw->data);
@@ -1388,8 +1389,6 @@ static int mt7615_load_patch(struct mt7615_dev *dev, u32 addr, const char *name)
dev_err(dev->mt76.dev, "Failed to start patch\n");
out:
- release_firmware(fw);
-
sem = mt76_connac_mcu_patch_sem_ctrl(&dev->mt76, false);
switch (sem) {
case PATCH_REL_SEM_SUCCESS:
@@ -1400,6 +1399,9 @@ static int mt7615_load_patch(struct mt7615_dev *dev, u32 addr, const char *name)
break;
}
+release_fw:
+ release_firmware(fw);
+
return ret;
}
--
2.30.1