From: Seevalamuthu Mariappan <[email protected]>
The flag's purpose is not only meant for ATF configs. Rename atf_config
to flag1, so it can be used for future purposes.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Seevalamuthu Mariappan <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.c | 2 +-
drivers/net/wireless/ath/ath11k/wmi.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 6c253eae9d06..a53783229520 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -3495,7 +3495,7 @@ ath11k_wmi_copy_resource_config(struct wmi_resource_config *wmi_cfg,
wmi_cfg->bpf_instruction_size = tg_cfg->bpf_instruction_size;
wmi_cfg->max_bssid_rx_filters = tg_cfg->max_bssid_rx_filters;
wmi_cfg->use_pdev_id = tg_cfg->use_pdev_id;
- wmi_cfg->flag1 = tg_cfg->atf_config;
+ wmi_cfg->flag1 = tg_cfg->flag1;
wmi_cfg->peer_map_unmap_v2_support = tg_cfg->peer_map_unmap_v2_support;
wmi_cfg->sched_params = tg_cfg->sched_params;
wmi_cfg->twt_ap_pdev_count = tg_cfg->twt_ap_pdev_count;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index d35c47e0b19d..234aa59f708e 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -5014,7 +5014,7 @@ struct target_resource_config {
u32 vo_minfree;
u32 rx_batchmode;
u32 tt_support;
- u32 atf_config;
+ u32 flag1;
u32 iphdr_pad_config;
u32 qwrap_config:16,
alloc_frag_desc_for_data_pkt:16;
--
2.25.1
From: Seevalamuthu Mariappan <[email protected]>
pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed
at the beginning. This causes invalid values in survey dump. Hence, align
the structure with the firmware.
Note: The firmware releases follow this order since the feature was
implemented. Also, it is not changing across the branches including
QCA6390.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ritesh Singh <[email protected]>
Signed-off-by: Seevalamuthu Mariappan <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.c | 1 +
drivers/net/wireless/ath/ath11k/wmi.h | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index a53783229520..e3d11a0a7b7c 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1339,6 +1339,7 @@ int ath11k_wmi_pdev_bss_chan_info_request(struct ath11k *ar,
WMI_TAG_PDEV_BSS_CHAN_INFO_REQUEST) |
FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
cmd->req_type = type;
+ cmd->pdev_id = ar->pdev->pdev_id;
ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
"WMI bss chan info req type %d\n", type);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 78849f0255fa..799b3bd96a27 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2962,6 +2962,7 @@ struct wmi_pdev_bss_chan_info_req_cmd {
u32 tlv_header;
/* ref wmi_bss_chan_info_req_type */
u32 req_type;
+ u32 pdev_id;
} __packed;
struct wmi_ap_ps_peer_cmd {
@@ -4058,7 +4059,6 @@ struct wmi_vdev_stopped_event {
} __packed;
struct wmi_pdev_bss_chan_info_event {
- u32 pdev_id;
u32 freq; /* Units in MHz */
u32 noise_floor; /* units are dBm */
/* rx clear - how often the channel was unused */
@@ -4076,6 +4076,7 @@ struct wmi_pdev_bss_chan_info_event {
/*rx_cycle cnt for my bss in 64bits format */
u32 rx_bss_cycle_count_low;
u32 rx_bss_cycle_count_high;
+ u32 pdev_id;
} __packed;
#define WMI_VDEV_INSTALL_KEY_COMPL_STATUS_SUCCESS 0
--
2.25.1
From: Seevalamuthu Mariappan <[email protected]>
Survey dump statistics is not displaying channel rx and tx time because
the service flag is not enabled. Enable the service flag "bss_chan_info"
in wmi_resource_config to fetch and print the stats for the specific
pdev.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ritesh Singh <[email protected]>
Signed-off-by: Seevalamuthu Mariappan <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
---
drivers/net/wireless/ath/ath11k/hw.c | 2 ++
drivers/net/wireless/ath/ath11k/wmi.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index d9596903b0a5..9dd02f8b1dd2 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -97,6 +97,7 @@ static void ath11k_init_wmi_config_qca6390(struct ath11k_base *ab,
config->num_multicast_filter_entries = 0x20;
config->num_wow_filters = 0x16;
config->num_keep_alive_pattern = 0;
+ config->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
}
static void ath11k_hw_ipq8074_reo_setup(struct ath11k_base *ab)
@@ -197,6 +198,7 @@ static void ath11k_init_wmi_config_ipq8074(struct ath11k_base *ab,
config->peer_map_unmap_v2_support = 1;
config->twt_ap_pdev_count = ab->num_radios;
config->twt_ap_sta_count = 1000;
+ config->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
}
static int ath11k_hw_mac_id_to_pdev_id_ipq8074(struct ath11k_hw_params *hw,
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 234aa59f708e..78849f0255fa 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2244,6 +2244,8 @@ struct wmi_init_cmd {
u32 num_host_mem_chunks;
} __packed;
+#define WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 BIT(5)
+
struct wmi_resource_config {
u32 tlv_header;
u32 num_vdevs;
--
2.25.1
Jouni Malinen <[email protected]> wrote:
> The flag's purpose is not only meant for ATF configs. Rename atf_config
> to flag1, so it can be used for future purposes.
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Seevalamuthu Mariappan <[email protected]>
> Signed-off-by: Jouni Malinen <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>
3 patches applied to ath-next branch of ath.git, thanks.
7e9fb2418a4c ath11k: Rename atf_config to flag1 in target_resource_config
9b4dd38b46cf ath11k: add support in survey dump with bss_chan_info
feab5bb8f1d4 ath11k: Align bss_chan_info structure with firmware
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches