Third revision of this patch, here's version 1 and 2:
version 1: https://lore.kernel.org/linux-wireless/[email protected]/
version 2: https://lore.kernel.org/linux-wireless/[email protected]/
Changes between v2 and v3:
- Removed a small comment about the choice of dev_dbg() over mwifiex_dbg()
- Switched to same licence boilerplate for pcie_quirks.* as the rest of mwifiex
Jonas Dreßler (1):
mwifiex: pcie: add DMI-based quirk implementation for Surface devices
Tsuchiya Yuto (1):
mwifiex: pcie: add reset_d3cold quirk for Surface gen4+ devices
drivers/net/wireless/marvell/mwifiex/Makefile | 1 +
drivers/net/wireless/marvell/mwifiex/pcie.c | 11 ++
drivers/net/wireless/marvell/mwifiex/pcie.h | 1 +
.../wireless/marvell/mwifiex/pcie_quirks.c | 161 ++++++++++++++++++
.../wireless/marvell/mwifiex/pcie_quirks.h | 23 +++
5 files changed, 197 insertions(+)
create mode 100644 drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
create mode 100644 drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
--
2.31.1
This commit adds the ability to apply device-specific quirks to the
mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses
with dmi.c. We'll add identifiers to match various MS Surface devices,
which this is primarily meant for, later.
This commit is a slightly modified version of a previous patch sent in
by Tsuchiya Yuto.
Co-developed-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Jonas Dreßler <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/Makefile | 1 +
drivers/net/wireless/marvell/mwifiex/pcie.c | 4 ++
drivers/net/wireless/marvell/mwifiex/pcie.h | 1 +
.../wireless/marvell/mwifiex/pcie_quirks.c | 38 +++++++++++++++++++
.../wireless/marvell/mwifiex/pcie_quirks.h | 20 ++++++++++
5 files changed, 64 insertions(+)
create mode 100644 drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
create mode 100644 drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
diff --git a/drivers/net/wireless/marvell/mwifiex/Makefile b/drivers/net/wireless/marvell/mwifiex/Makefile
index 162d557b78af..2bd00f40958e 100644
--- a/drivers/net/wireless/marvell/mwifiex/Makefile
+++ b/drivers/net/wireless/marvell/mwifiex/Makefile
@@ -49,6 +49,7 @@ mwifiex_sdio-y += sdio.o
obj-$(CONFIG_MWIFIEX_SDIO) += mwifiex_sdio.o
mwifiex_pcie-y += pcie.o
+mwifiex_pcie-y += pcie_quirks.o
obj-$(CONFIG_MWIFIEX_PCIE) += mwifiex_pcie.o
mwifiex_usb-y += usb.o
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 46517515ba72..a530832c9421 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -27,6 +27,7 @@
#include "wmm.h"
#include "11n.h"
#include "pcie.h"
+#include "pcie_quirks.h"
#define PCIE_VERSION "1.0"
#define DRV_NAME "Marvell mwifiex PCIe"
@@ -410,6 +411,9 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
return ret;
}
+ /* check quirks */
+ mwifiex_initialize_quirks(card);
+
if (mwifiex_add_card(card, &card->fw_done, &pcie_ops,
MWIFIEX_PCIE, &pdev->dev)) {
pr_err("%s failed\n", __func__);
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h
index 5ed613d65709..981e330c77d7 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.h
@@ -244,6 +244,7 @@ struct pcie_service_card {
unsigned long work_flags;
bool pci_reset_ongoing;
+ unsigned long quirks;
};
static inline int
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
new file mode 100644
index 000000000000..c1665ac5c5d9
--- /dev/null
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -0,0 +1,38 @@
+/*
+ * NXP Wireless LAN device driver: PCIE and platform specific quirks
+ *
+ * This software file (the "File") is distributed by NXP
+ * under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include <linux/dmi.h>
+
+#include "pcie_quirks.h"
+
+/* quirk table based on DMI matching */
+static const struct dmi_system_id mwifiex_quirk_table[] = {
+ {}
+};
+
+void mwifiex_initialize_quirks(struct pcie_service_card *card)
+{
+ struct pci_dev *pdev = card->dev;
+ const struct dmi_system_id *dmi_id;
+
+ dmi_id = dmi_first_match(mwifiex_quirk_table);
+ if (dmi_id)
+ card->quirks = (uintptr_t)dmi_id->driver_data;
+
+ if (!card->quirks)
+ dev_info(&pdev->dev, "no quirks enabled\n");
+}
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
new file mode 100644
index 000000000000..18eacc8c2d3a
--- /dev/null
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
@@ -0,0 +1,20 @@
+/*
+ * NXP Wireless LAN device driver: PCIE and platform specific quirks
+ *
+ * This software file (the "File") is distributed by NXP
+ * under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ */
+
+#include "pcie.h"
+
+void mwifiex_initialize_quirks(struct pcie_service_card *card);
--
2.31.1
From: Tsuchiya Yuto <[email protected]>
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it
seems that putting the wifi device into D3cold is required according
to errata.inf file on Windows installation (Windows/INF/errata.inf).
This patch adds a function that performs power-cycle (put into D3cold
then D0) and call the function at the end of reset_prepare().
Note: Need to also reset the parent device (bridge) of wifi on SB1;
it might be because the bridge of wifi always reports it's in D3hot.
When I tried to reset only the wifi device (not touching parent), it gave
the following error and the reset failed:
acpi device:4b: Cannot transition to power state D0 for parent in D3hot
mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible)
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Jonas Dreßler <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 7 +
.../wireless/marvell/mwifiex/pcie_quirks.c | 123 ++++++++++++++++++
.../wireless/marvell/mwifiex/pcie_quirks.h | 3 +
3 files changed, 133 insertions(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index a530832c9421..c6ccce426b49 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -528,6 +528,13 @@ static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev)
mwifiex_shutdown_sw(adapter);
clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags);
clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags);
+
+ /* On MS Surface gen4+ devices FLR isn't effective to recover from
+ * hangups, so we power-cycle the card instead.
+ */
+ if (card->quirks & QUIRK_FW_RST_D3COLD)
+ mwifiex_pcie_reset_d3cold_quirk(pdev);
+
mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
card->pci_reset_ongoing = true;
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
index c1665ac5c5d9..0234cf3c2974 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -21,6 +21,72 @@
/* quirk table based on DMI matching */
static const struct dmi_system_id mwifiex_quirk_table[] = {
+ {
+ .ident = "Surface Pro 4",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"),
+ },
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
+ },
+ {
+ .ident = "Surface Pro 5",
+ .matches = {
+ /* match for SKU here due to generic product name "Surface Pro" */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"),
+ },
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
+ },
+ {
+ .ident = "Surface Pro 5 (LTE)",
+ .matches = {
+ /* match for SKU here due to generic product name "Surface Pro" */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"),
+ },
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
+ },
+ {
+ .ident = "Surface Pro 6",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"),
+ },
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
+ },
+ {
+ .ident = "Surface Book 1",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"),
+ },
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
+ },
+ {
+ .ident = "Surface Book 2",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"),
+ },
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
+ },
+ {
+ .ident = "Surface Laptop 1",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"),
+ },
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
+ },
+ {
+ .ident = "Surface Laptop 2",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"),
+ },
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
+ },
{}
};
@@ -35,4 +101,61 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card)
if (!card->quirks)
dev_info(&pdev->dev, "no quirks enabled\n");
+ if (card->quirks & QUIRK_FW_RST_D3COLD)
+ dev_info(&pdev->dev, "quirk reset_d3cold enabled\n");
+}
+
+static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev)
+{
+ dev_info(&pdev->dev, "putting into D3cold...\n");
+
+ pci_save_state(pdev);
+ if (pci_is_enabled(pdev))
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3cold);
+}
+
+static int mwifiex_pcie_set_power_d0(struct pci_dev *pdev)
+{
+ int ret;
+
+ dev_info(&pdev->dev, "putting into D0...\n");
+
+ pci_set_power_state(pdev, PCI_D0);
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ return ret;
+ }
+ pci_restore_state(pdev);
+
+ return 0;
+}
+
+int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev)
+{
+ struct pci_dev *parent_pdev = pci_upstream_bridge(pdev);
+ int ret;
+
+ /* Power-cycle (put into D3cold then D0) */
+ dev_info(&pdev->dev, "Using reset_d3cold quirk to perform FW reset\n");
+
+ /* We need to perform power-cycle also for bridge of wifi because
+ * on some devices (e.g. Surface Book 1), the OS for some reasons
+ * can't know the real power state of the bridge.
+ * When tried to power-cycle only wifi, the reset failed with the
+ * following dmesg log:
+ * "Cannot transition to power state D0 for parent in D3hot".
+ */
+ mwifiex_pcie_set_power_d3cold(pdev);
+ mwifiex_pcie_set_power_d3cold(parent_pdev);
+
+ ret = mwifiex_pcie_set_power_d0(parent_pdev);
+ if (ret)
+ return ret;
+ ret = mwifiex_pcie_set_power_d0(pdev);
+ if (ret)
+ return ret;
+
+ return 0;
}
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
index 18eacc8c2d3a..8ec4176d698f 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
@@ -17,4 +17,7 @@
#include "pcie.h"
+#define QUIRK_FW_RST_D3COLD BIT(0)
+
void mwifiex_initialize_quirks(struct pcie_service_card *card);
+int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev);
--
2.31.1
Jonas Dreßler <[email protected]> wrote:
> This commit adds the ability to apply device-specific quirks to the
> mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses
> with dmi.c. We'll add identifiers to match various MS Surface devices,
> which this is primarily meant for, later.
>
> This commit is a slightly modified version of a previous patch sent in
> by Tsuchiya Yuto.
>
> Co-developed-by: Tsuchiya Yuto <[email protected]>
> Signed-off-by: Tsuchiya Yuto <[email protected]>
> Signed-off-by: Jonas Dreßler <[email protected]>
2 patches applied to wireless-drivers-next.git, thanks.
5448bc2a426c mwifiex: pcie: add DMI-based quirk implementation for Surface devices
a847666accf2 mwifiex: pcie: add reset_d3cold quirk for Surface gen4+ devices
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches