Re-order and modify conditions for MU DL/UL and ofdma DL fields, and
also clean up some unnecessary zero settings.
Signed-off-by: Shayne Chen <[email protected]>
---
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 42 +++++++++----------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 8ba60b66e4a9..4c687380120e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1520,22 +1520,37 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
struct sta_rec_muru *muru;
struct tlv *tlv;
- if (!sta->vht_cap.vht_supported && !sta->he_cap.has_he)
+ if (vif->type != NL80211_IFTYPE_STATION &&
+ vif->type != NL80211_IFTYPE_AP)
+ return;
+
+ if (!sta->vht_cap.vht_supported)
return;
tlv = mt7915_mcu_add_tlv(skb, STA_REC_MURU, sizeof(*muru));
muru = (struct sta_rec_muru *)tlv;
- muru->cfg.ofdma_dl_en = true;
- /* A non-AP HE station must support MU beamformee */
- muru->cfg.mimo_dl_en = (vif->type == NL80211_IFTYPE_STATION &&
- vif->bss_conf.he_support) ||
- mvif->cap.he_mu_ebfer ||
+ muru->cfg.mimo_dl_en = mvif->cap.he_mu_ebfer ||
mvif->cap.vht_mu_ebfer ||
mvif->cap.vht_mu_ebfee;
+
+ muru->mimo_dl.vht_mu_bfee =
+ !!(sta->vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
+
+ if (!sta->he_cap.has_he)
+ return;
+
+ muru->mimo_dl.partial_bw_dl_mimo =
+ HE_PHY(CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO, elem->phy_cap_info[6]);
+
muru->cfg.mimo_ul_en = true;
+ muru->mimo_ul.full_ul_mimo =
+ HE_PHY(CAP2_UL_MU_FULL_MU_MIMO, elem->phy_cap_info[2]);
+ muru->mimo_ul.partial_ul_mimo =
+ HE_PHY(CAP2_UL_MU_PARTIAL_MU_MIMO, elem->phy_cap_info[2]);
+ muru->cfg.ofdma_dl_en = true;
muru->ofdma_dl.punc_pream_rx =
HE_PHY(CAP1_PREAMBLE_PUNC_RX_MASK, elem->phy_cap_info[1]);
muru->ofdma_dl.he_20m_in_40m_2g =
@@ -1544,9 +1559,6 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
HE_PHY(CAP8_20MHZ_IN_160MHZ_HE_PPDU, elem->phy_cap_info[8]);
muru->ofdma_dl.he_80m_in_160m =
HE_PHY(CAP8_80MHZ_IN_160MHZ_HE_PPDU, elem->phy_cap_info[8]);
- muru->ofdma_dl.lt16_sigb = 0;
- muru->ofdma_dl.rx_su_comp_sigb = 0;
- muru->ofdma_dl.rx_su_non_comp_sigb = 0;
muru->ofdma_ul.t_frame_dur =
HE_MAC(CAP1_TF_MAC_PAD_DUR_MASK, elem->mac_cap_info[1]);
@@ -1554,18 +1566,6 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
HE_MAC(CAP2_MU_CASCADING, elem->mac_cap_info[2]);
muru->ofdma_ul.uo_ra =
HE_MAC(CAP3_OFDMA_RA, elem->mac_cap_info[3]);
- muru->ofdma_ul.he_2x996_tone = 0;
- muru->ofdma_ul.rx_t_frame_11ac = 0;
-
- muru->mimo_dl.vht_mu_bfee =
- !!(sta->vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
- muru->mimo_dl.partial_bw_dl_mimo =
- HE_PHY(CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO, elem->phy_cap_info[6]);
-
- muru->mimo_ul.full_ul_mimo =
- HE_PHY(CAP2_UL_MU_FULL_MU_MIMO, elem->phy_cap_info[2]);
- muru->mimo_ul.partial_ul_mimo =
- HE_PHY(CAP2_UL_MU_PARTIAL_MU_MIMO, elem->phy_cap_info[2]);
}
static void
--
2.29.2