Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.
This also fixes running multiple AP interfaces on MT7613, which only has 3
WMM slots.
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index a0e8db0b27f9..e519fd2879ec 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -208,11 +208,9 @@ static int mt7615_add_interface(struct ieee80211_hw *hw,
mvif->mt76.omac_idx = idx;
mvif->mt76.band_idx = ext_phy;
- if (mt7615_ext_phy(dev))
- mvif->mt76.wmm_idx = ext_phy * (MT7615_MAX_WMM_SETS / 2) +
- mvif->mt76.idx % (MT7615_MAX_WMM_SETS / 2);
- else
- mvif->mt76.wmm_idx = mvif->mt76.idx % MT7615_MAX_WMM_SETS;
+ mvif->mt76.wmm_idx = vif->type != NL80211_IFTYPE_AP;
+ if (ext_phy)
+ mvif->mt76.wmm_idx += 2;
dev->mt76.vif_mask |= BIT(mvif->mt76.idx);
dev->omac_mask |= BIT_ULL(mvif->mt76.omac_idx);
--
2.30.1