There are two problems with the current code that have been highlighted
with the AQL feature that is now enbaled by default.
First problem is in ieee80211_rx_h_mesh_fwding(),
ieee80211_select_queue_80211() is used on received packets to choose
the sending AC queue of the forwarding packet although this function
should only be called on TX packet (it uses ieee80211_tx_info).
This ends with forwarded mesh packets been sent on unrelated random AC
queue. To fix that, AC queue can directly be infered from skb->priority
which has been extracted from QOS info (see ieee80211_parse_qos()).
Second problem is the value of queue_mapping set on forwarded mesh
frames via skb_set_queue_mapping() is not the AC of the packet but a
hardware queue index. This may or may not work depending on AC to HW
queue mapping which is driver specific.
Both of these issues lead to improper AC selection while forwarding
mesh packets but more importantly due to improper airtime accounting
(which is done on a per STA, per AC basis) caused traffic stall with
the introduction of AQL.
Fixes: cf44012810cc ("mac80211: fix unnecessary frame drops in mesh fwding")
Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping")
Co-developed-by: Remi Pommarel <[email protected]>
Signed-off-by: Remi Pommarel <[email protected]>
Signed-off-by: Nicolas Escande <[email protected]>
---
net/mac80211/rx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 8885d3923bed..ca7e1f99a8c0 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2923,13 +2923,13 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
ether_addr_equal(sdata->vif.addr, hdr->addr3))
return RX_CONTINUE;
- ac = ieee80211_select_queue_80211(sdata, skb, hdr);
+ ac = ieee802_1d_to_ac[skb->priority];
q = sdata->vif.hw_queue[ac];
if (ieee80211_queue_stopped(&local->hw, q)) {
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion);
return RX_DROP_MONITOR;
}
- skb_set_queue_mapping(skb, q);
+ skb_set_queue_mapping(skb, ac);
if (!--mesh_hdr->ttl) {
if (!is_multicast_ether_addr(hdr->addr1))
--
2.35.1