From: MeiChia Chiu <[email protected]>
The muru enable/disable are only set after the first station connection.
Without this patch, the firmware couldn't enable muru
if the first connected station is non-HE type.
Fixes: 16bff457dd33a ("mt76: mt7915: rework mt7915_mcu_sta_muru_tlv()")
Reviewed-by: Ryder Lee <[email protected]>
Signed-off-by: MeiChia Chiu <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 02f93189370e..0addb5a112d9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -924,9 +924,6 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
vif->type != NL80211_IFTYPE_AP)
return;
- if (!sta->vht_cap.vht_supported)
- return;
-
tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_MURU, sizeof(*muru));
muru = (struct sta_rec_muru *)tlv;
@@ -934,9 +931,12 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
muru->cfg.mimo_dl_en = mvif->cap.he_mu_ebfer ||
mvif->cap.vht_mu_ebfer ||
mvif->cap.vht_mu_ebfee;
+ muru->cfg.mimo_ul_en = true;
+ muru->cfg.ofdma_dl_en = true;
- muru->mimo_dl.vht_mu_bfee =
- !!(sta->vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
+ if (sta->vht_cap.vht_supported)
+ muru->mimo_dl.vht_mu_bfee =
+ !!(sta->vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
if (!sta->he_cap.has_he)
return;
@@ -944,13 +944,11 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
muru->mimo_dl.partial_bw_dl_mimo =
HE_PHY(CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO, elem->phy_cap_info[6]);
- muru->cfg.mimo_ul_en = true;
muru->mimo_ul.full_ul_mimo =
HE_PHY(CAP2_UL_MU_FULL_MU_MIMO, elem->phy_cap_info[2]);
muru->mimo_ul.partial_ul_mimo =
HE_PHY(CAP2_UL_MU_PARTIAL_MU_MIMO, elem->phy_cap_info[2]);
- muru->cfg.ofdma_dl_en = true;
muru->ofdma_dl.punc_pream_rx =
HE_PHY(CAP1_PREAMBLE_PUNC_RX_MASK, elem->phy_cap_info[1]);
muru->ofdma_dl.he_20m_in_40m_2g =
--
2.29.2