2022-04-06 15:13:45

by Manikanta Pubbisetty

Subject: [PATCH v4 09/12] ath11k: Do not put HW in DBS mode for WCN6750

Though WCN6750 is a single PDEV device, it is not a
DBS solution. So, do not put HW in DBS mode for WCN6750.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <[email protected]>
---
drivers/net/wireless/ath/ath11k/core.c | 2 +-
drivers/net/wireless/ath/ath11k/wmi.c | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 297d024b1ef9..17db898166f0 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -1278,7 +1278,7 @@ static int ath11k_core_start(struct ath11k_base *ab,
}

/* put hardware to DBS mode */
- if (ab->hw_params.single_pdev_only) {
+ if (ab->hw_params.single_pdev_only && ab->hw_params.num_rxmda_per_pdev > 1) {
ret = ath11k_wmi_set_hw_mode(ab, WMI_HOST_HW_MODE_DBS);
if (ret) {
ath11k_err(ab, "failed to send dbs mode: %d\n", ret);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 3af24b18204e..5b9fd9d8f06d 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/skbuff.h>
#include <linux/ctype.h>
@@ -8208,7 +8209,7 @@ int ath11k_wmi_attach(struct ath11k_base *ab)
ab->wmi_ab.preferred_hw_mode = WMI_HOST_HW_MODE_MAX;

/* It's overwritten when service_ext_ready is handled */
- if (ab->hw_params.single_pdev_only)
+ if (ab->hw_params.single_pdev_only && ab->hw_params.num_rxmda_per_pdev > 1)
ab->wmi_ab.preferred_hw_mode = WMI_HOST_HW_MODE_SINGLE;

/* TODO: Init remaining wmi soc resources required */
--
2.35.1

2022-04-27 10:46:02

by Kalle Valo

Subject: Re: [PATCH v4 09/12] ath11k: Do not put HW in DBS mode for WCN6750

Manikanta Pubbisetty <[email protected]> wrote:

> Though WCN6750 is a single PDEV device, it is not a
> DBS solution. So, do not put HW in DBS mode for WCN6750.
>
> Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Manikanta Pubbisetty <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>

3 patches applied to ath-next branch of ath.git, thanks.

b6f6301041a3 ath11k: Do not put HW in DBS mode for WCN6750
95959d702ede ath11k: WMI changes to support WCN6750
33b67a4b4e64 ath11k: Update WBM idle ring HP after FW mode on

--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches