From: Ajay Singh <[email protected]>
For power-up sequence, WILC expects RESET set to high 5ms after making
chip_en(enable) so corrected chip power-up sequence by making RESET high.
For Power-Down sequence, the correct sequence make RESET and CHIP_EN low
without any extra delay.
Signed-off-by: Ajay Singh <[email protected]>
---
drivers/net/wireless/microchip/wilc1000/spi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 18420e954402..2ae8dd3411ac 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -191,11 +191,11 @@ static void wilc_wlan_power(struct wilc *wilc, bool on)
/* assert ENABLE: */
gpiod_set_value(gpios->enable, 1);
mdelay(5);
- /* deassert RESET: */
- gpiod_set_value(gpios->reset, 0);
- } else {
/* assert RESET: */
gpiod_set_value(gpios->reset, 1);
+ } else {
+ /* deassert RESET: */
+ gpiod_set_value(gpios->reset, 0);
/* deassert ENABLE: */
gpiod_set_value(gpios->enable, 0);
}
--
2.25.1