The new BB parameters add new cfg_tpe 4 to improve performance of eFEM
modules (rfe_type >= 50), but we are using iFEM modules for now, so this
warning can be ignored.
Signed-off-by: Ping-Ke Shih <[email protected]>
---
drivers/net/wireless/realtek/rtw89/phy.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c
index 6a6bdc652e09e..b1821d2474b3b 100644
--- a/drivers/net/wireless/realtek/rtw89/phy.c
+++ b/drivers/net/wireless/realtek/rtw89/phy.c
@@ -1036,6 +1036,7 @@ static void rtw89_phy_config_bb_gain(struct rtw89_dev *rtwdev,
{
const struct rtw89_chip_info *chip = rtwdev->chip;
union rtw89_phy_bb_gain_arg arg = { .addr = reg->addr };
+ struct rtw89_efuse *efuse = &rtwdev->efuse;
if (arg.gain_band >= RTW89_BB_GAIN_BAND_NR)
return;
@@ -1061,6 +1062,11 @@ static void rtw89_phy_config_bb_gain(struct rtw89_dev *rtwdev,
case 3:
rtw89_phy_cfg_bb_gain_op1db(rtwdev, arg, reg->data);
break;
+ case 4:
+ /* This cfg_type is only used by rfe_type >= 50 with eFEM */
+ if (efuse->rfe_type < 50)
+ break;
+ fallthrough;
default:
rtw89_warn(rtwdev,
"bb gain {0x%x:0x%x} with unknown cfg type: %d\n",
--
2.25.1