The PCIe PERST pin is currently pulled down on WCN7850 and it causes
some power leakage.
Fix it by notifying firmware not to pull down PCIe PERST pin in QMI
message for WCN7850.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Carl Huang <[email protected]>
---
drivers/net/wireless/ath/ath12k/hw.c | 3 ++-
drivers/net/wireless/ath/ath12k/qmi.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index cc47cbf93f6b..5991cc91cd00 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -962,7 +962,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.hal_ops = &hal_wcn7850_ops,
- .qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01),
+ .qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01) |
+ BIT(CNSS_PCIE_PERST_NO_PULL_V01),
},
{
.name = "qcn9274 hw2.0",
diff --git a/drivers/net/wireless/ath/ath12k/qmi.h b/drivers/net/wireless/ath/ath12k/qmi.h
index ad87f19903db..df76149c49f5 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.h
+++ b/drivers/net/wireless/ath/ath12k/qmi.h
@@ -189,6 +189,7 @@ struct wlfw_host_mlo_chip_info_s_v01 {
enum ath12k_qmi_cnss_feature {
CNSS_FEATURE_MIN_ENUM_VAL_V01 = INT_MIN,
CNSS_QDSS_CFG_MISS_V01 = 3,
+ CNSS_PCIE_PERST_NO_PULL_V01 = 4,
CNSS_MAX_FEATURE_V01 = 64,
CNSS_FEATURE_MAX_ENUM_VAL_V01 = INT_MAX,
};
--
2.25.1