Issue: Though the Netgear AXE3000 (A8000) is based on the mt7921
chipset because of the unique USB VID:PID combination this device
does not initialize/register. Thus making it not plug and play.
Fix: Adds support for the Netgear AXE3000 (A8000) based on the Mediatek
mt7921au chipset. The method of action is adding the USD VID/PID
pair to the mt7921u_device_table[] array.
Notes: A retail sample of the Netgear AXE3000 (A8000) yeilds the following
from lsusb D 0846:9060 NetGear, Inc. Wireless_Device. This pair
0846:9060 VID:PID has been reported by other users on Github.
Signed-off-by: Reese Russell <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7921/usb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/usb.c b/drivers/net/wireless/mediatek/mt76/mt7921/usb.c
index 8fef09ed29c9..a08d20d5c556 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/usb.c
@@ -18,6 +18,9 @@ static const struct usb_device_id mt7921u_device_table[] = {
/* Comfast CF-952AX */
{ USB_DEVICE_AND_INTERFACE_INFO(0x3574, 0x6211, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)MT7921_FIRMWARE_WM },
+ /* Netgear, Inc. [A8000,AXE3000] */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9060, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)MT7921_FIRMWARE_WM },
{ },
};
--
2.34.1