From: Ben Greear <[email protected]>
When enabled, this allows per-skb rx rate reporting.
Enabling this may degrade RX performance, so it remains
disabled by default.
Signed-off-by: Ben Greear <[email protected]>
---
.../wireless/mediatek/mt76/mt7915/debugfs.c | 33 +++++++++++++++++++
.../net/wireless/mediatek/mt76/mt7915/init.c | 3 +-
.../net/wireless/mediatek/mt76/mt7915/main.c | 2 +-
.../wireless/mediatek/mt76/mt7915/mt7915.h | 5 +++
4 files changed, 41 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
index f9d539bb9077..444ca671c6fa 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
@@ -743,6 +743,38 @@ mt7915_fw_util_wa_show(struct seq_file *file, void *data)
DEFINE_SHOW_ATTRIBUTE(mt7915_fw_util_wa);
+static int
+mt7915_rx_group_5_enable_set(void *data, u64 val)
+{
+ struct mt7915_dev *dev = data;
+
+ mutex_lock(&dev->mt76.mutex);
+
+ dev->rx_group_5_enable = !!val;
+
+ /* Enabled if we requested enabled OR if monitor mode is enabled. */
+ mt76_rmw_field(dev, MT_DMA_DCR0(0), MT_DMA_DCR0_RXD_G5_EN,
+ dev->rx_group_5_enable);
+ mt76_testmode_reset(dev->phy.mt76, true);
+
+ mutex_unlock(&dev->mt76.mutex);
+
+ return 0;
+}
+
+static int
+mt7915_rx_group_5_enable_get(void *data, u64 *val)
+{
+ struct mt7915_dev *dev = data;
+
+ *val = dev->rx_group_5_enable;
+
+ return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_rx_group_5_enable, mt7915_rx_group_5_enable_get,
+ mt7915_rx_group_5_enable_set, "%lld\n");
+
static void
mt7915_ampdu_stat_read_phy(struct mt7915_phy *phy,
struct seq_file *file)
@@ -1297,6 +1329,7 @@ int mt7915_init_debugfs(struct mt7915_phy *phy)
&mt7915_fw_util_wm_fops);
debugfs_create_file("fw_util_wa", 0400, dir, dev,
&mt7915_fw_util_wa_fops);
+ debugfs_create_file("rx_group_5_enable", 0600, dir, dev, &fops_rx_group_5_enable);
debugfs_create_file("implicit_txbf", 0600, dir, dev,
&fops_implicit_txbf);
debugfs_create_file("txpower_sku", 0400, dir, phy,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index cd98a1e1e63c..75571566430e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -476,7 +476,8 @@ mt7915_mac_init_band(struct mt7915_dev *dev, u8 band)
mt76_rmw_field(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_MAX_RX_LEN, 0x680);
/* mt7915: disable rx rate report by default due to hw issues */
- mt76_clear(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_RXD_G5_EN);
+ mt76_rmw_field(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_RXD_G5_EN,
+ dev->rx_group_5_enable);
/* clear estimated value of EIFS for Rx duration & OBSS time */
mt76_wr(dev, MT_WF_RMAC_RSVD0(band), MT_WF_RMAC_RSVD0_EIFS_CLR);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 4344fd91e9f2..7e20b2e9368c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -492,7 +492,7 @@ static int mt7915_config(struct ieee80211_hw *hw, u32 changed)
phy->monitor_enabled = enabled;
mt76_rmw_field(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_RXD_G5_EN,
- enabled);
+ dev->rx_group_5_enable);
mt76_testmode_reset(phy->mt76, true);
__mt7915_configure_filter(hw, 0, &total_flags, multicast);
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
index 0ed041813d95..41f65c7cb5db 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
@@ -315,6 +315,11 @@ struct mt7915_dev {
u16 chainshift;
u32 hif_idx;
+ /* Should we enable group-5 rx descriptor logic? This may decrease RX
+ * throughput, but will give per skb rx rate information..
+ */
+ bool rx_group_5_enable;
+
struct work_struct init_work;
struct work_struct rc_work;
struct work_struct dump_work;
--
2.40.0