From: Po-Hao Huang <[email protected]>
The flush period may not always intersect with DTIM and when that
happens, an error log "timed out to flush pci TX ring[6]" is shown.
Bypass this since hardware will do proper transmission on the next
DTIM period for broadcast/multicast packets in high queue.
Signed-off-by: Po-Hao Huang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
---
v2: no change
---
drivers/net/wireless/realtek/rtw88/pci.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 672ddde808160..44a8fff34cddf 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -738,8 +738,9 @@ static void __rtw_pci_flush_queues(struct rtw_dev *rtwdev, u32 pci_queues,
u8 q;
for (q = 0; q < RTK_MAX_TX_QUEUE_NUM; q++) {
- /* It may be not necessary to flush BCN and H2C tx queues. */
- if (q == RTW_TX_QUEUE_BCN || q == RTW_TX_QUEUE_H2C)
+ /* Unnecessary to flush BCN, H2C and HI tx queues. */
+ if (q == RTW_TX_QUEUE_BCN || q == RTW_TX_QUEUE_H2C ||
+ q == RTW_TX_QUEUE_HI0)
continue;
if (pci_queues & BIT(q))
--
2.25.1