From: Gregory Greenman <[email protected]>
Hi,
A bunch of patches from our internal tree with mac80211 and
cfg80211 changes. It's the usual developement, cleanups and
bugfixes.
Thanks,
Gregory
Alon Giladi (1):
wifi: mac80211: drop unprotected robust mgmt before 4-way-HS
Benjamin Berg (1):
wifi: mac80211: avoid lockdep checking when removing deflink
Ilan Peer (1):
wifi: cfg80211: Retrieve PSD information from RNR AP information
Johannes Berg (6):
wifi: mac80211: move action length check up
wifi: mac80211: drop some unprotected action frames
wifi: mac80211: store BSS param change count from assoc response
wifi: mac80211: always hold sdata lock in chanctx assign/unassign
wifi: mac80211: fix CRC calculation for extended elems
wifi: nl80211/reg: add no-EHT regulatory flag
include/linux/ieee80211.h | 71 +++++++++++++++++++++++++++++++++++-
include/net/cfg80211.h | 2 +
include/uapi/linux/nl80211.h | 2 +
net/mac80211/cfg.c | 16 +++++---
net/mac80211/ieee80211_i.h | 2 +
net/mac80211/iface.c | 7 ++++
net/mac80211/mlme.c | 16 +++++++-
net/mac80211/rx.c | 27 ++++++++++----
net/mac80211/sta_info.c | 5 ++-
net/mac80211/util.c | 25 ++++++-------
net/wireless/reg.c | 4 +-
net/wireless/scan.c | 13 +++++++
12 files changed, 157 insertions(+), 33 deletions(-)
--
2.38.1
From: Johannes Berg <[email protected]>
We should not receive/handle unicast protected dual
or public action frames that aren't protected, so
drop them - in the latter case of course only if MFP
is used.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
---
net/mac80211/rx.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 5c1d6c2674ef..04dd714b8730 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2405,9 +2405,9 @@ static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
static int ieee80211_drop_unencrypted_mgmt(struct ieee80211_rx_data *rx)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
- __le16 fc = hdr->frame_control;
+ struct ieee80211_mgmt *mgmt = (void *)rx->skb->data;
+ __le16 fc = mgmt->frame_control;
/*
* Pass through unencrypted frames if the hardware has
@@ -2416,6 +2416,11 @@ static int ieee80211_drop_unencrypted_mgmt(struct ieee80211_rx_data *rx)
if (status->flag & RX_FLAG_DECRYPTED)
return 0;
+ /* drop unicast protected dual (that wasn't protected) */
+ if (ieee80211_is_action(fc) &&
+ mgmt->u.action.category == WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION)
+ return -EACCES;
+
if (rx->sta && test_sta_flag(rx->sta, WLAN_STA_MFP)) {
if (unlikely(!ieee80211_has_protected(fc) &&
ieee80211_is_unicast_robust_mgmt_frame(rx->skb))) {
@@ -2450,6 +2455,12 @@ static int ieee80211_drop_unencrypted_mgmt(struct ieee80211_rx_data *rx)
if (unlikely(ieee80211_is_action(fc) && !rx->key &&
ieee80211_is_robust_mgmt_frame(rx->skb)))
return -EACCES;
+
+ /* drop unicast public action frames when using MPF */
+ if (is_unicast_ether_addr(mgmt->da) &&
+ ieee80211_is_public_action((void *)rx->skb->data,
+ rx->skb->len))
+ return -EACCES;
}
return 0;
--
2.38.1
From: Johannes Berg <[email protected]>
When receiving a multi-link association response, make sure to
track the BSS parameter change count for each link, including
the assoc link.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
---
include/linux/ieee80211.h | 64 ++++++++++++++++++++++++++++++++++++++
net/mac80211/ieee80211_i.h | 2 ++
net/mac80211/mlme.c | 16 +++++++++-
3 files changed, 81 insertions(+), 1 deletion(-)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index fa679613c562..15c4e12b6fc7 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -4689,6 +4689,34 @@ static inline u8 ieee80211_mle_common_size(const u8 *data)
return sizeof(*mle) + common + mle->variable[0];
}
+/**
+ * ieee80211_mle_get_bss_param_ch_cnt - returns the BSS parameter change count
+ * @mle: the basic multi link element
+ *
+ * The element is assumed to be of the correct type (BASIC) and big enough,
+ * this must be checked using ieee80211_mle_type_ok().
+ *
+ * If the BSS parameter change count value can't be found (the presence bit
+ * for it is clear), 0 will be returned.
+ */
+static inline u8
+ieee80211_mle_get_bss_param_ch_cnt(const struct ieee80211_multi_link_elem *mle)
+{
+ u16 control = le16_to_cpu(mle->control);
+ const u8 *common = mle->variable;
+
+ /* common points now at the beginning of ieee80211_mle_basic_common_info */
+ common += sizeof(struct ieee80211_mle_basic_common_info);
+
+ if (!(control & IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT))
+ return 0;
+
+ if (control & IEEE80211_MLC_BASIC_PRES_LINK_ID)
+ common += 1;
+
+ return *common;
+}
+
/**
* ieee80211_mle_get_eml_sync_delay - returns the medium sync delay
* @data: pointer to the multi link EHT IE
@@ -4902,6 +4930,42 @@ static inline bool ieee80211_mle_basic_sta_prof_size_ok(const u8 *data,
fixed + prof->sta_info_len <= len;
}
+/**
+ * ieee80211_mle_basic_sta_prof_bss_param_ch_cnt - get per-STA profile BSS
+ * parameter change count
+ * @prof: the per-STA profile, having been checked with
+ * ieee80211_mle_basic_sta_prof_size_ok() for the correct length
+ *
+ * Return: The BSS parameter change count value if present, 0 otherwise.
+ */
+static inline u8
+ieee80211_mle_basic_sta_prof_bss_param_ch_cnt(const struct ieee80211_mle_per_sta_profile *prof)
+{
+ u16 control = le16_to_cpu(prof->control);
+ const u8 *pos = prof->variable;
+
+ if (!(control & IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT))
+ return 0;
+
+ if (control & IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT)
+ pos += 6;
+ if (control & IEEE80211_MLE_STA_CONTROL_BEACON_INT_PRESENT)
+ pos += 2;
+ if (control & IEEE80211_MLE_STA_CONTROL_TSF_OFFS_PRESENT)
+ pos += 8;
+ if (control & IEEE80211_MLE_STA_CONTROL_DTIM_INFO_PRESENT)
+ pos += 2;
+ if (control & IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE &&
+ control & IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE) {
+ if (control & IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE)
+ pos += 2;
+ else
+ pos += 1;
+ }
+
+ return *pos;
+}
+
#define IEEE80211_MLE_STA_RECONF_CONTROL_LINK_ID 0x000f
#define IEEE80211_MLE_STA_RECONF_CONTROL_COMPLETE_PROFILE 0x0010
#define IEEE80211_MLE_STA_RECONF_CONTROL_STA_MAC_ADDR_PRESENT 0x0020
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index b5678f2d83f5..f9f145cdc773 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -951,6 +951,8 @@ struct ieee80211_link_data_managed {
int wmm_last_param_set;
int mu_edca_last_param_set;
+ u8 bss_param_ch_cnt;
+
struct cfg80211_bss *bss;
};
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 13226349e80e..150393f5d37d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4016,6 +4016,8 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link,
const struct cfg80211_bss_ies *bss_ies = NULL;
struct ieee80211_supported_band *sband;
struct ieee802_11_elems *elems;
+ const __le16 prof_bss_param_ch_present =
+ cpu_to_le16(IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT);
u16 capab_info;
bool ret;
@@ -4031,7 +4033,17 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link,
* successful, so set the status directly to success
*/
assoc_data->link[link_id].status = WLAN_STATUS_SUCCESS;
- } else if (!elems->prof) {
+ if (elems->ml_basic) {
+ if (!(elems->ml_basic->control &
+ cpu_to_le16(IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT))) {
+ ret = false;
+ goto out;
+ }
+ link->u.mgd.bss_param_ch_cnt =
+ ieee80211_mle_get_bss_param_ch_cnt(elems->ml_basic);
+ }
+ } else if (!elems->prof ||
+ !(elems->prof->control & prof_bss_param_ch_present)) {
ret = false;
goto out;
} else {
@@ -4044,6 +4056,8 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link,
*/
capab_info = get_unaligned_le16(ptr);
assoc_data->link[link_id].status = get_unaligned_le16(ptr + 2);
+ link->u.mgd.bss_param_ch_cnt =
+ ieee80211_mle_basic_sta_prof_bss_param_ch_cnt(elems->prof);
if (assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS) {
link_info(link, "association response status code=%u\n",
--
2.38.1
From: Johannes Berg <[email protected]>
Due to all the multi-link handling, we now expose the fact that
the sdata/vif is locked to drivers, e.g. when the driver uses
ieee80211_set_monitor_channel(). This was true when a chanctx
is added to or removed from a link, _except_ in monitor mode
with the virtual sdata/vif. Change that, so that drivers can
make that assumption.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
---
net/mac80211/cfg.c | 16 +++++++++++-----
net/mac80211/iface.c | 7 +++++++
2 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index eea7028a46a7..e7ac24603892 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -913,24 +913,30 @@ static int ieee80211_set_monitor_channel(struct wiphy *wiphy,
if (cfg80211_chandef_identical(&local->monitor_chandef, chandef))
return 0;
- mutex_lock(&local->mtx);
if (local->use_chanctx) {
sdata = wiphy_dereference(local->hw.wiphy,
local->monitor_sdata);
if (sdata) {
+ sdata_lock(sdata);
+ mutex_lock(&local->mtx);
ieee80211_link_release_channel(&sdata->deflink);
ret = ieee80211_link_use_channel(&sdata->deflink,
chandef,
IEEE80211_CHANCTX_EXCLUSIVE);
+ mutex_unlock(&local->mtx);
+ sdata_unlock(sdata);
+ }
+ } else {
+ mutex_lock(&local->mtx);
+ if (local->open_count == local->monitors) {
+ local->_oper_chandef = *chandef;
+ ieee80211_hw_config(local, 0);
}
- } else if (local->open_count == local->monitors) {
- local->_oper_chandef = *chandef;
- ieee80211_hw_config(local, 0);
+ mutex_unlock(&local->mtx);
}
if (ret == 0)
local->monitor_chandef = *chandef;
- mutex_unlock(&local->mtx);
return ret;
}
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 9518acf9643b..be586bc0b5b7 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1133,6 +1133,7 @@ int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
snprintf(sdata->name, IFNAMSIZ, "%s-monitor",
wiphy_name(local->hw.wiphy));
sdata->wdev.iftype = NL80211_IFTYPE_MONITOR;
+ mutex_init(&sdata->wdev.mtx);
ieee80211_sdata_init(local, sdata);
@@ -1157,16 +1158,19 @@ int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
rcu_assign_pointer(local->monitor_sdata, sdata);
mutex_unlock(&local->iflist_mtx);
+ sdata_lock(sdata);
mutex_lock(&local->mtx);
ret = ieee80211_link_use_channel(&sdata->deflink, &local->monitor_chandef,
IEEE80211_CHANCTX_EXCLUSIVE);
mutex_unlock(&local->mtx);
+ sdata_unlock(sdata);
if (ret) {
mutex_lock(&local->iflist_mtx);
RCU_INIT_POINTER(local->monitor_sdata, NULL);
mutex_unlock(&local->iflist_mtx);
synchronize_net();
drv_remove_interface(local, sdata);
+ mutex_destroy(&sdata->wdev.mtx);
kfree(sdata);
return ret;
}
@@ -1202,12 +1206,15 @@ void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
synchronize_net();
+ sdata_lock(sdata);
mutex_lock(&local->mtx);
ieee80211_link_release_channel(&sdata->deflink);
mutex_unlock(&local->mtx);
+ sdata_unlock(sdata);
drv_remove_interface(local, sdata);
+ mutex_destroy(&sdata->wdev.mtx);
kfree(sdata);
}
--
2.38.1
From: Benjamin Berg <[email protected]>
struct sta_info may be removed without holding sta_mtx if it has not
yet been inserted. To support this, only assert that the lock is held
for links other than the deflink.
This fixes lockdep issues that may be triggered in error cases.
Signed-off-by: Benjamin Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
---
net/mac80211/sta_info.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 731b832b257c..7751f8ba960e 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -355,8 +355,9 @@ static void sta_remove_link(struct sta_info *sta, unsigned int link_id,
struct sta_link_alloc *alloc = NULL;
struct link_sta_info *link_sta;
- link_sta = rcu_dereference_protected(sta->link[link_id],
- lockdep_is_held(&sta->local->sta_mtx));
+ link_sta = rcu_access_pointer(sta->link[link_id]);
+ if (link_sta != &sta->deflink)
+ lockdep_assert_held(&sta->local->sta_mtx);
if (WARN_ON(!link_sta))
return;
--
2.38.1
From: Johannes Berg <[email protected]>
For extended elements, we currently only calculate the CRC
for some of them, but really we should do it also for the
rest that we care about, such as EHT operation and multi-
link.
Also, while at it, it seems we should do it even if they
aren't well-formed, so we notice if that changes.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
---
net/mac80211/util.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 35701316dccf..516e68a39b7d 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -918,6 +918,7 @@ ieee80211_parse_extension_element(u32 *crc,
struct ieee80211_elems_parse_params *params)
{
const void *data = elem->data + 1;
+ bool calc_crc = false;
u8 len;
if (!elem->datalen)
@@ -927,12 +928,9 @@ ieee80211_parse_extension_element(u32 *crc,
switch (elem->data[0]) {
case WLAN_EID_EXT_HE_MU_EDCA:
- if (len >= sizeof(*elems->mu_edca_param_set)) {
+ calc_crc = true;
+ if (len >= sizeof(*elems->mu_edca_param_set))
elems->mu_edca_param_set = data;
- if (crc)
- *crc = crc32_be(*crc, (void *)elem,
- elem->datalen + 2);
- }
break;
case WLAN_EID_EXT_HE_CAPABILITY:
if (ieee80211_he_capa_size_ok(data, len)) {
@@ -941,13 +939,10 @@ ieee80211_parse_extension_element(u32 *crc,
}
break;
case WLAN_EID_EXT_HE_OPERATION:
+ calc_crc = true;
if (len >= sizeof(*elems->he_operation) &&
- len >= ieee80211_he_oper_size(data) - 1) {
- if (crc)
- *crc = crc32_be(*crc, (void *)elem,
- elem->datalen + 2);
+ len >= ieee80211_he_oper_size(data) - 1)
elems->he_operation = data;
- }
break;
case WLAN_EID_EXT_UORA:
if (len >= 1)
@@ -981,16 +976,15 @@ ieee80211_parse_extension_element(u32 *crc,
case WLAN_EID_EXT_EHT_OPERATION:
if (ieee80211_eht_oper_size_ok(data, len))
elems->eht_operation = data;
+ calc_crc = true;
break;
case WLAN_EID_EXT_EHT_MULTI_LINK:
+ calc_crc = true;
+
if (ieee80211_mle_size_ok(data, len)) {
const struct ieee80211_multi_link_elem *mle =
(void *)data;
- if (crc)
- *crc = crc32_be(*crc, (void *)elem,
- elem->datalen + 2);
-
switch (le16_get_bits(mle->control,
IEEE80211_ML_CONTROL_TYPE)) {
case IEEE80211_ML_CONTROL_TYPE_BASIC:
@@ -1009,6 +1003,9 @@ ieee80211_parse_extension_element(u32 *crc,
}
break;
}
+
+ if (crc && calc_crc)
+ *crc = crc32_be(*crc, (void *)elem, elem->datalen + 2);
}
static u32
--
2.38.1
From: Ilan Peer <[email protected]>
Retrieve the Power Spectral Density (PSD) value from RNR AP
information entry and store it so it could be used by the drivers.
PSD value is explained in Section 9.4.2.170 of Draft
P802.11Revme_D2.0.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
---
include/linux/ieee80211.h | 7 +++++--
include/net/cfg80211.h | 2 ++
net/wireless/scan.c | 13 +++++++++++++
3 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 15c4e12b6fc7..6f1747a9c106 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -4504,6 +4504,9 @@ static inline bool for_each_element_completed(const struct element *element,
#define IEEE80211_RNR_TBTT_PARAMS_PROBE_ACTIVE 0x20
#define IEEE80211_RNR_TBTT_PARAMS_COLOC_AP 0x40
+#define IEEE80211_RNR_TBTT_PARAMS_PSD_NO_LIMIT 127
+#define IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED -128
+
struct ieee80211_neighbor_ap_info {
u8 tbtt_info_hdr;
u8 tbtt_info_len;
@@ -4539,7 +4542,7 @@ struct ieee80211_tbtt_info_7_8_9 {
/* The following element is optional, structure may not grow */
u8 bss_params;
- u8 psd_20;
+ s8 psd_20;
} __packed;
/* Format of the TBTT information element if it has >= 11 bytes */
@@ -4550,7 +4553,7 @@ struct ieee80211_tbtt_info_ge_11 {
/* The following elements are optional, structure may grow */
u8 bss_params;
- u8 psd_20;
+ s8 psd_20;
struct ieee80211_rnr_mld_params mld_params;
} __packed;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9eba57d35e98..41c5248eb7f4 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2466,6 +2466,7 @@ struct cfg80211_scan_info {
* @short_ssid_valid: @short_ssid is valid and can be used
* @psc_no_listen: when set, and the channel is a PSC channel, no need to wait
* 20 TUs before starting to send probe requests.
+ * @psd_20: The AP's 20 MHz PSD value.
*/
struct cfg80211_scan_6ghz_params {
u32 short_ssid;
@@ -2474,6 +2475,7 @@ struct cfg80211_scan_6ghz_params {
bool unsolicited_probe;
bool short_ssid_valid;
bool psc_no_listen;
+ s8 psd_20;
};
/**
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 465334b3960e..e38c51512f97 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -96,6 +96,7 @@ MODULE_PARM_DESC(bss_entries_limit,
* colocated and can be discovered via legacy bands.
* @short_ssid_valid: short_ssid is valid and can be used
* @short_ssid: the short SSID for this SSID
+ * @psd_20: The 20MHz PSD EIRP of the primary 20MHz channel for the reported AP
*/
struct cfg80211_colocated_ap {
struct list_head list;
@@ -111,6 +112,7 @@ struct cfg80211_colocated_ap {
transmitted_bssid:1,
colocated_ess:1,
short_ssid_valid:1;
+ s8 psd_20;
};
static void bss_free(struct cfg80211_internal_bss *bss)
@@ -578,6 +580,8 @@ static int cfg80211_parse_ap_info(struct cfg80211_colocated_ap *entry,
{
u8 bss_params;
+ entry->psd_20 = IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED;
+
/* The length is already verified by the caller to contain bss_params */
if (length > sizeof(struct ieee80211_tbtt_info_7_8_9)) {
struct ieee80211_tbtt_info_ge_11 *tbtt_info = (void *)pos;
@@ -594,12 +598,20 @@ static int cfg80211_parse_ap_info(struct cfg80211_colocated_ap *entry,
IEEE80211_RNR_MLD_PARAMS_DISABLED_LINK))
return -EINVAL;
}
+
+ if (length >= offsetofend(struct ieee80211_tbtt_info_ge_11,
+ psd_20))
+ entry->psd_20 = tbtt_info->psd_20;
} else {
struct ieee80211_tbtt_info_7_8_9 *tbtt_info = (void *)pos;
memcpy(entry->bssid, tbtt_info->bssid, ETH_ALEN);
bss_params = tbtt_info->bss_params;
+
+ if (length == offsetofend(struct ieee80211_tbtt_info_7_8_9,
+ psd_20))
+ entry->psd_20 = tbtt_info->psd_20;
}
/* ignore entries with invalid BSSID */
@@ -904,6 +916,7 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
scan_6ghz_params->short_ssid = ap->short_ssid;
scan_6ghz_params->short_ssid_valid = ap->short_ssid_valid;
scan_6ghz_params->unsolicited_probe = ap->unsolicited_probe;
+ scan_6ghz_params->psd_20 = ap->psd_20;
/*
* If a PSC channel is added to the scan and 'need_scan_psc' is
--
2.38.1
From: Johannes Berg <[email protected]>
This just propagates to the channel flags, like no-HE and
similar other flags before it.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
---
include/uapi/linux/nl80211.h | 2 ++
net/wireless/reg.c | 4 +++-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index fece687054ef..b96ab2c9a5a5 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4443,6 +4443,7 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
* @NL80211_RRF_NO_HE: HE operation not allowed
* @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
+ * @NL80211_RRF_NO_EHT: EHT operation not allowed
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
@@ -4462,6 +4463,7 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_NO_160MHZ = 1<<16,
NL80211_RRF_NO_HE = 1<<17,
NL80211_RRF_NO_320MHZ = 1<<18,
+ NL80211_RRF_NO_EHT = 1<<19,
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 949e1fb3bec6..ead3c74439b8 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -5,7 +5,7 @@
* Copyright 2008-2011 Luis R. Rodriguez <[email protected]>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2022 Intel Corporation
+ * Copyright (C) 2018 - 2023 Intel Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -1587,6 +1587,8 @@ static u32 map_regdom_flags(u32 rd_flags)
channel_flags |= IEEE80211_CHAN_NO_HE;
if (rd_flags & NL80211_RRF_NO_320MHZ)
channel_flags |= IEEE80211_CHAN_NO_320MHZ;
+ if (rd_flags & NL80211_RRF_NO_EHT)
+ channel_flags |= IEEE80211_CHAN_NO_EHT;
return channel_flags;
}
--
2.38.1