These functions will be part of an abstraction layer that works with
both AR9300 and QCN5502 EEPROM formats.
This change does not appear to affect the final binary.
Signed-off-by: Wenli Looi <[email protected]>
---
.../net/wireless/ath/ath9k/ar9003_eeprom.c | 90 +++++++++----------
1 file changed, 45 insertions(+), 45 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 944f46cdf3..58dce556b0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -2970,6 +2970,51 @@ static int interpolate(int x, int xa, int xb, int ya, int yb)
return ya + factor + plus;
}
+/* XXX: review hardware docs */
+static int ath9k_hw_ar9300_get_eeprom_ver(struct ath_hw *ah)
+{
+ return ah->eeprom.ar9300_eep.eepromVersion;
+}
+
+/* XXX: could be read from the eepromVersion, not sure yet */
+static int ath9k_hw_ar9300_get_eeprom_rev(struct ath_hw *ah)
+{
+ return 0;
+}
+
+static struct ar9300_modal_eep_header *ar9003_modal_header(struct ath_hw *ah,
+ bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+ if (is2ghz)
+ return &eep->modalHeader2G;
+ else
+ return &eep->modalHeader5G;
+}
+
+static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah, int chain,
+ bool is2ghz)
+{
+ __le16 val = ar9003_modal_header(ah, is2ghz)->antCtrlChain[chain];
+ return le16_to_cpu(val);
+}
+
+u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz)
+{
+ return le32_to_cpu(ar9003_modal_header(ah, is2ghz)->antCtrlCommon);
+}
+
+u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz)
+{
+ return le32_to_cpu(ar9003_modal_header(ah, is2ghz)->antCtrlCommon2);
+}
+
+static u16 ar9003_switch_com_spdt_get(struct ath_hw *ah, bool is2ghz)
+{
+ return le16_to_cpu(ar9003_modal_header(ah, is2ghz)->switchcomspdt);
+}
+
static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah,
enum eeprom_param param)
{
@@ -3578,29 +3623,6 @@ static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
}
#endif
-/* XXX: review hardware docs */
-static int ath9k_hw_ar9300_get_eeprom_ver(struct ath_hw *ah)
-{
- return ah->eeprom.ar9300_eep.eepromVersion;
-}
-
-/* XXX: could be read from the eepromVersion, not sure yet */
-static int ath9k_hw_ar9300_get_eeprom_rev(struct ath_hw *ah)
-{
- return 0;
-}
-
-static struct ar9300_modal_eep_header *ar9003_modal_header(struct ath_hw *ah,
- bool is2ghz)
-{
- struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
-
- if (is2ghz)
- return &eep->modalHeader2G;
- else
- return &eep->modalHeader5G;
-}
-
static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz)
{
int bias = ar9003_modal_header(ah, is2ghz)->xpaBiasLvl;
@@ -3620,28 +3642,6 @@ static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz)
}
}
-static u16 ar9003_switch_com_spdt_get(struct ath_hw *ah, bool is2ghz)
-{
- return le16_to_cpu(ar9003_modal_header(ah, is2ghz)->switchcomspdt);
-}
-
-u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz)
-{
- return le32_to_cpu(ar9003_modal_header(ah, is2ghz)->antCtrlCommon);
-}
-
-u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz)
-{
- return le32_to_cpu(ar9003_modal_header(ah, is2ghz)->antCtrlCommon2);
-}
-
-static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah, int chain,
- bool is2ghz)
-{
- __le16 val = ar9003_modal_header(ah, is2ghz)->antCtrlChain[chain];
- return le16_to_cpu(val);
-}
-
static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
{
struct ath_common *common = ath9k_hw_common(ah);
--
2.34.1