Fix and hopefully improve documentation for 'flag' fields of
a few types by adding references to relevant enumerations.
Signed-off-by: Dmitry Antipov <[email protected]>
---
include/net/cfg80211.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7c7d03aa9d06..7f76f731e541 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -263,7 +263,7 @@ enum ieee80211_privacy {
* are only for driver use when pointers to this structure are
* passed around.
*
- * @flags: rate-specific flags
+ * @flags: rate-specific flags from &enum ieee80211_rate_flags
* @bitrate: bitrate in units of 100 Kbps
* @hw_value: driver/hardware value for this rate
* @hw_value_short: driver/hardware value for this rate when
@@ -1350,7 +1350,7 @@ struct cfg80211_unsol_bcast_probe_resp {
* @twt_responder: Enable Target Wait Time
* @he_required: stations must support HE
* @sae_h2e_required: stations must support direct H2E technique in SAE
- * @flags: flags, as defined in enum cfg80211_ap_settings_flags
+ * @flags: flags, as defined in &enum nl80211_ap_settings_flags
* @he_obss_pd: OBSS Packet Detection settings
* @he_oper: HE operation IE (or %NULL if HE isn't enabled)
* @fils_discovery: FILS discovery transmission parameters
@@ -2153,7 +2153,7 @@ enum mpath_info_flags {
* @sn: target sequence number
* @metric: metric (cost) of this mesh path
* @exptime: expiration time for the mesh path from now, in msecs
- * @flags: mesh path flags
+ * @flags: mesh path flags from &enum mesh_path_flags
* @discovery_timeout: total mesh path discovery timeout, in msecs
* @discovery_retries: mesh path discovery retries
* @generation: generation number for nl80211 dumps.
@@ -2493,7 +2493,7 @@ struct cfg80211_scan_6ghz_params {
* the actual dwell time may be shorter.
* @duration_mandatory: if set, the scan duration must be as specified by the
* %duration field.
- * @flags: bit field of flags controlling operation
+ * @flags: control flags from &enum nl80211_scan_flags
* @rates: bitmap of rates to advertise for each band
* @wiphy: the wiphy this was for
* @scan_start: time (in jiffies) when the scan started
@@ -2613,7 +2613,7 @@ struct cfg80211_bss_select_adjust {
* @scan_width: channel width for scanning
* @ie: optional information element(s) to add into Probe Request or %NULL
* @ie_len: length of ie in octets
- * @flags: bit field of flags controlling operation
+ * @flags: control flags from &enum nl80211_scan_flags
* @match_sets: sets of parameters to be matched for a scan result
* entry to be considered valid and to be passed to the host
* (others are filtered out).
@@ -8115,7 +8115,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
* @link_id: the ID of the link the frame was received on
* @buf: Management frame (header + body)
* @len: length of the frame data
- * @flags: flags, as defined in enum nl80211_rxmgmt_flags
+ * @flags: flags, as defined in &enum nl80211_rxmgmt_flags
* @rx_tstamp: Hardware timestamp of frame RX in nanoseconds
* @ack_tstamp: Hardware timestamp of ack TX in nanoseconds
*/
--
2.41.0