Check for (and hopefully recover from) possible 'mt76_poll_msec()'
timeout in 'mt76x0_phy_tssi_dc_calibrate()' as it's done in
'mt76x0_phy_tssi_adc_calibrate()', convert the subject from 'void'
to return 'int' and 'WARN_ON()' on it in 'mt76x0_phy_calibrate()'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
index d543ef3de65b..99e4b24e258d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -500,7 +500,7 @@ mt76x0_phy_bbp_set_bw(struct mt76x02_dev *dev, enum nl80211_chan_width width)
mt76x02_mcu_function_select(dev, BW_SETTING, bw);
}
-static void mt76x0_phy_tssi_dc_calibrate(struct mt76x02_dev *dev)
+static int mt76x0_phy_tssi_dc_calibrate(struct mt76x02_dev *dev)
{
struct ieee80211_channel *chan = dev->mphy.chandef.chan;
u32 val;
@@ -523,7 +523,11 @@ static void mt76x0_phy_tssi_dc_calibrate(struct mt76x02_dev *dev)
/* enable TX with DAC0 input */
mt76_wr(dev, MT_BBP(TXBE, 6), BIT(31));
- mt76_poll_msec(dev, MT_BBP(CORE, 34), BIT(4), 0, 200);
+ if (!mt76_poll_msec(dev, MT_BBP(CORE, 34), BIT(4), 0, 200)) {
+ mt76_clear(dev, MT_BBP(CORE, 34), BIT(4));
+ return -ETIMEDOUT;
+ }
+
dev->cal.tssi_dc = mt76_rr(dev, MT_BBP(CORE, 35)) & 0xff;
/* stop bypass ADDA */
@@ -537,6 +541,8 @@ static void mt76x0_phy_tssi_dc_calibrate(struct mt76x02_dev *dev)
if (chan->band == NL80211_BAND_5GHZ)
mt76x0_rf_rmw(dev, MT_RF(0, 67), 0xf, 0x4);
+
+ return 0;
}
static int
@@ -875,7 +881,7 @@ void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on)
if (mt76x0_tssi_enabled(dev)) {
mt76_wr(dev, MT_MAC_SYS_CTRL,
MT_MAC_SYS_CTRL_ENABLE_RX);
- mt76x0_phy_tssi_dc_calibrate(dev);
+ WARN_ON(mt76x0_phy_tssi_dc_calibrate(dev) < 0);
mt76_wr(dev, MT_MAC_SYS_CTRL,
MT_MAC_SYS_CTRL_ENABLE_TX |
MT_MAC_SYS_CTRL_ENABLE_RX);
--
2.41.0