Only trigger PSE reset if PSE was stuck, otherwise it can cause DMA issues.
Trigger the PSE reset while DMA is fully stopped in order to improve
reliabilty.
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Felix Fietkau <[email protected]>
---
.../net/wireless/mediatek/mt76/mt7603/mac.c | 29 ++++++++-----------
1 file changed, 12 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
index 7a506a0c46e2..cf21d06257e5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
@@ -1441,15 +1441,6 @@ static void mt7603_mac_watchdog_reset(struct mt7603_dev *dev)
mt7603_beacon_set_timer(dev, -1, 0);
- if (dev->reset_cause[RESET_CAUSE_RESET_FAILED] ||
- dev->cur_reset_cause == RESET_CAUSE_RX_PSE_BUSY ||
- dev->cur_reset_cause == RESET_CAUSE_BEACON_STUCK ||
- dev->cur_reset_cause == RESET_CAUSE_TX_HANG)
- mt7603_pse_reset(dev);
-
- if (dev->reset_cause[RESET_CAUSE_RESET_FAILED])
- goto skip_dma_reset;
-
mt7603_mac_stop(dev);
mt76_clear(dev, MT_WPDMA_GLO_CFG,
@@ -1459,28 +1450,32 @@ static void mt7603_mac_watchdog_reset(struct mt7603_dev *dev)
mt7603_irq_disable(dev, mask);
- mt76_set(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_FORCE_TX_EOF);
-
mt7603_pse_client_reset(dev);
mt76_queue_tx_cleanup(dev, dev->mt76.q_mcu[MT_MCUQ_WM], true);
for (i = 0; i < __MT_TXQ_MAX; i++)
mt76_queue_tx_cleanup(dev, dev->mphy.q_tx[i], true);
+ mt7603_dma_sched_reset(dev);
+
+ mt76_tx_status_check(&dev->mt76, true);
+
mt76_for_each_q_rx(&dev->mt76, i) {
mt76_queue_rx_reset(dev, i);
}
- mt76_tx_status_check(&dev->mt76, true);
+ if (dev->reset_cause[RESET_CAUSE_RESET_FAILED] ||
+ dev->cur_reset_cause == RESET_CAUSE_RX_PSE_BUSY)
+ mt7603_pse_reset(dev);
- mt7603_dma_sched_reset(dev);
+ if (!dev->reset_cause[RESET_CAUSE_RESET_FAILED]) {
+ mt7603_mac_dma_start(dev);
- mt7603_mac_dma_start(dev);
+ mt7603_irq_enable(dev, mask);
- mt7603_irq_enable(dev, mask);
+ clear_bit(MT76_RESET, &dev->mphy.state);
+ }
-skip_dma_reset:
- clear_bit(MT76_RESET, &dev->mphy.state);
mutex_unlock(&dev->mt76.mutex);
mt76_worker_enable(&dev->mt76.tx_worker);
--
2.41.0