The device ignore the rx filters during the scan operation.
wfx_configure_filter() acquires scan_lock to reflect this restriction.
However, it is not really necessary since mac80211 don't try to
configure Rx filters during scan.
However, the things are changing. The scan operation is also used to
implement remain-on-channel. In this case, wfx_configure_filter() can be
called during the scan. Currently, this scenario generate a delay that
end with a timeout in the upper layers. For the final user, some
scenario of the EasyConnect specification end with a failure.
So, avoid acquiring the scan_lock and just return.
Signed-off-by: Jérôme Pouiller <[email protected]>
---
drivers/net/wireless/silabs/wfx/sta.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/silabs/wfx/sta.c b/drivers/net/wireless/silabs/wfx/sta.c
index 496b93de3ee58..1b6c158457b42 100644
--- a/drivers/net/wireless/silabs/wfx/sta.c
+++ b/drivers/net/wireless/silabs/wfx/sta.c
@@ -96,8 +96,11 @@ void wfx_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
*total_flags &= FIF_BCN_PRBRESP_PROMISC | FIF_ALLMULTI | FIF_OTHER_BSS |
FIF_PROBE_REQ | FIF_PSPOLL;
+ /* Filters are ignored during the scan. No frames are filtered. */
+ if (mutex_is_locked(&wdev->scan_lock))
+ return;
+
mutex_lock(&wdev->conf_mutex);
- mutex_lock(&wdev->scan_lock);
while ((wvif = wvif_iterate(wdev, wvif)) != NULL) {
/* Note: FIF_BCN_PRBRESP_PROMISC covers probe response and
* beacons from other BSS
@@ -126,7 +129,6 @@ void wfx_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
filter_prbreq = true;
wfx_hif_set_rx_filter(wvif, filter_bssid, filter_prbreq);
}
- mutex_unlock(&wdev->scan_lock);
mutex_unlock(&wdev->conf_mutex);
}
--
2.39.2