From: Peter Chiu <[email protected]>
Use the new fixed rate command format to let the fixed field function
work normally.
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
---
.../net/wireless/mediatek/mt76/mt7996/mcu.c | 12 ++--
.../net/wireless/mediatek/mt76/mt7996/mcu.h | 71 ++++++++++++++++++-
2 files changed, 75 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 8e2037671c9b..8097924d460b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -1805,8 +1805,8 @@ int mt7996_mcu_set_fixed_field(struct mt7996_dev *dev, struct ieee80211_vif *vif
{
struct mt7996_vif *mvif = (struct mt7996_vif *)vif->drv_priv;
struct mt7996_sta *msta = (struct mt7996_sta *)sta->drv_priv;
- struct sta_phy *phy = data;
- struct sta_rec_ra_fixed *ra;
+ struct sta_phy_uni *phy = data;
+ struct sta_rec_ra_fixed_uni *ra;
struct sk_buff *skb;
struct tlv *tlv;
@@ -1817,7 +1817,7 @@ int mt7996_mcu_set_fixed_field(struct mt7996_dev *dev, struct ieee80211_vif *vif
return PTR_ERR(skb);
tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_RA_UPDATE, sizeof(*ra));
- ra = (struct sta_rec_ra_fixed *)tlv;
+ ra = (struct sta_rec_ra_fixed_uni *)tlv;
switch (field) {
case RATE_PARAM_AUTO:
@@ -1849,7 +1849,7 @@ mt7996_mcu_add_rate_ctrl_fixed(struct mt7996_dev *dev, struct ieee80211_vif *vif
struct cfg80211_chan_def *chandef = &mvif->phy->mt76->chandef;
struct cfg80211_bitrate_mask *mask = &mvif->bitrate_mask;
enum nl80211_band band = chandef->chan->band;
- struct sta_phy phy = {};
+ struct sta_phy_uni phy = {};
int ret, nrates = 0;
#define __sta_phy_bitrate_mask_check(_mcs, _gi, _ht, _he) \
@@ -1937,13 +1937,13 @@ mt7996_mcu_sta_rate_ctrl_tlv(struct sk_buff *skb, struct mt7996_dev *dev,
struct cfg80211_chan_def *chandef = &mphy->chandef;
struct cfg80211_bitrate_mask *mask = &mvif->bitrate_mask;
enum nl80211_band band = chandef->chan->band;
- struct sta_rec_ra *ra;
+ struct sta_rec_ra_uni *ra;
struct tlv *tlv;
u32 supp_rate = sta->deflink.supp_rates[band];
u32 cap = sta->wme ? STA_CAP_WMM : 0;
tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_RA, sizeof(*ra));
- ra = (struct sta_rec_ra *)tlv;
+ ra = (struct sta_rec_ra_uni *)tlv;
ra->valid = true;
ra->auto_rate = true;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
index d3ac6ac0e5c9..a3eae32c8f10 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.h
@@ -494,6 +494,73 @@ struct sta_rec_sec_uni {
struct sec_key_uni key[2];
} __packed;
+struct sta_phy_uni {
+ u8 type;
+ u8 flag;
+ u8 stbc;
+ u8 sgi;
+ u8 bw;
+ u8 ldpc;
+ u8 mcs;
+ u8 nss;
+ u8 he_ltf;
+ u8 rsv[3];
+};
+
+struct sta_rec_ra_uni {
+ __le16 tag;
+ __le16 len;
+
+ u8 valid;
+ u8 auto_rate;
+ u8 phy_mode;
+ u8 channel;
+ u8 bw;
+ u8 disable_cck;
+ u8 ht_mcs32;
+ u8 ht_gf;
+ u8 ht_mcs[4];
+ u8 mmps_mode;
+ u8 gband_256;
+ u8 af;
+ u8 auth_wapi_mode;
+ u8 rate_len;
+
+ u8 supp_mode;
+ u8 supp_cck_rate;
+ u8 supp_ofdm_rate;
+ __le32 supp_ht_mcs;
+ __le16 supp_vht_mcs[4];
+
+ u8 op_mode;
+ u8 op_vht_chan_width;
+ u8 op_vht_rx_nss;
+ u8 op_vht_rx_nss_type;
+
+ __le32 sta_cap;
+
+ struct sta_phy_uni phy;
+ u8 rx_rcpi[4];
+} __packed;
+
+struct sta_rec_ra_fixed_uni {
+ __le16 tag;
+ __le16 len;
+
+ __le32 field;
+ u8 op_mode;
+ u8 op_vht_chan_width;
+ u8 op_vht_rx_nss;
+ u8 op_vht_rx_nss_type;
+
+ struct sta_phy_uni phy;
+
+ u8 spe_idx;
+ u8 short_preamble;
+ u8 is_5g;
+ u8 mmps_mode;
+} __packed;
+
struct sta_rec_hdrt {
__le16 tag;
__le16 len;
@@ -677,9 +744,9 @@ enum {
sizeof(struct sta_rec_amsdu) + \
sizeof(struct sta_rec_bfee) + \
sizeof(struct sta_rec_phy) + \
- sizeof(struct sta_rec_ra) + \
+ sizeof(struct sta_rec_ra_uni) + \
sizeof(struct sta_rec_sec) + \
- sizeof(struct sta_rec_ra_fixed) + \
+ sizeof(struct sta_rec_ra_fixed_uni) + \
sizeof(struct sta_rec_he_6g_capa) + \
sizeof(struct sta_rec_eht) + \
sizeof(struct sta_rec_hdrt) + \
--
2.39.2