2012-01-10 04:19:45

by Sujith Manoharan

[permalink] [raw]
Subject: [PATCH 1/4] ath6kl: Fix SDIO error path

sdio_release_host() would be called twice if sdio_set_block_size()
fails for some reason, which would result in the following warning.

WARNING: at /home/sujith/dev/wireless-testing/drivers/mmc/core/core.c:828 mmc_release_host+0x42/0x50 [mmc_core]()

Call Trace:
[<ffffffff81064fdf>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8106503a>] warn_slowpath_null+0x1a/0x20
[<ffffffffa03beb42>] mmc_release_host+0x42/0x50 [mmc_core]
[<ffffffffa03c917e>] sdio_release_host+0x1e/0x30 [mmc_core]
[<ffffffffa053fac7>] ath6kl_sdio_config+0xc7/0x110 [ath6kl_sdio]
[<ffffffffa053fd2c>] ath6kl_sdio_probe+0x21c/0x320 [ath6kl_sdio]
[<ffffffffa03beb2a>] ? mmc_release_host+0x2a/0x50 [mmc_core]
[<ffffffffa03c7d2a>] sdio_bus_probe+0xfa/0x130 [mmc_core]
[<ffffffff813015ae>] driver_probe_device+0x7e/0x1b0
[<ffffffff8130178b>] __driver_attach+0xab/0xb0
[<ffffffff813016e0>] ? driver_probe_device+0x1b0/0x1b0
[<ffffffff813016e0>] ? driver_probe_device+0x1b0/0x1b0
[<ffffffff81300504>] bus_for_each_dev+0x64/0xa0
[<ffffffff8130123e>] driver_attach+0x1e/0x20
[<ffffffff81300e80>] bus_add_driver+0x1b0/0x280
[<ffffffffa0065000>] ? 0xffffffffa0064fff
[<ffffffff81301d06>] driver_register+0x76/0x140
[<ffffffffa0065000>] ? 0xffffffffa0064fff
[<ffffffffa03c7b71>] sdio_register_driver+0x21/0x30 [mmc_core]
[<ffffffffa0065012>] ath6kl_sdio_init+0x12/0x35 [ath6kl_sdio]
[<ffffffff81002042>] do_one_initcall+0x42/0x180
[<ffffffff810b025f>] sys_init_module+0x8f/0x200
[<ffffffff81425ac2>] system_call_fastpath+0x16/0x1b

Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath6kl/sdio.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 278a9f3..66aee7c 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -772,7 +772,6 @@ static int ath6kl_sdio_config(struct ath6kl *ar)
if (ret) {
ath6kl_err("Set sdio block size %d failed: %d)\n",
HIF_MBOX_BLOCK_SIZE, ret);
- sdio_release_host(func);
goto out;
}

--
1.7.8.3



2012-01-12 12:06:20

by Sujith Manoharan

[permalink] [raw]
Subject: Re: [PATCH 1/4] ath6kl: Fix SDIO error path

Kalle Valo wrote:
> Thanks, all four patches applied. Patch 4 has caused two checkpatch
> warnings, I fixed those. If my comment for patch 3 needs action (which I
> doubt), please send a followup patch.

Thanks !

Sujith

2012-01-12 11:45:40

by Kalle Valo

[permalink] [raw]
Subject: Re: [PATCH 1/4] ath6kl: Fix SDIO error path

On 01/10/2012 06:23 AM, Sujith Manoharan wrote:
> sdio_release_host() would be called twice if sdio_set_block_size()
> fails for some reason, which would result in the following warning.
>
> WARNING: at /home/sujith/dev/wireless-testing/drivers/mmc/core/core.c:828 mmc_release_host+0x42/0x50 [mmc_core]()
>
> Call Trace:
> [<ffffffff81064fdf>] warn_slowpath_common+0x7f/0xc0
> [<ffffffff8106503a>] warn_slowpath_null+0x1a/0x20
> [<ffffffffa03beb42>] mmc_release_host+0x42/0x50 [mmc_core]
> [<ffffffffa03c917e>] sdio_release_host+0x1e/0x30 [mmc_core]
> [<ffffffffa053fac7>] ath6kl_sdio_config+0xc7/0x110 [ath6kl_sdio]
> [<ffffffffa053fd2c>] ath6kl_sdio_probe+0x21c/0x320 [ath6kl_sdio]
> [<ffffffffa03beb2a>] ? mmc_release_host+0x2a/0x50 [mmc_core]
> [<ffffffffa03c7d2a>] sdio_bus_probe+0xfa/0x130 [mmc_core]
> [<ffffffff813015ae>] driver_probe_device+0x7e/0x1b0
> [<ffffffff8130178b>] __driver_attach+0xab/0xb0
> [<ffffffff813016e0>] ? driver_probe_device+0x1b0/0x1b0
> [<ffffffff813016e0>] ? driver_probe_device+0x1b0/0x1b0
> [<ffffffff81300504>] bus_for_each_dev+0x64/0xa0
> [<ffffffff8130123e>] driver_attach+0x1e/0x20
> [<ffffffff81300e80>] bus_add_driver+0x1b0/0x280
> [<ffffffffa0065000>] ? 0xffffffffa0064fff
> [<ffffffff81301d06>] driver_register+0x76/0x140
> [<ffffffffa0065000>] ? 0xffffffffa0064fff
> [<ffffffffa03c7b71>] sdio_register_driver+0x21/0x30 [mmc_core]
> [<ffffffffa0065012>] ath6kl_sdio_init+0x12/0x35 [ath6kl_sdio]
> [<ffffffff81002042>] do_one_initcall+0x42/0x180
> [<ffffffff810b025f>] sys_init_module+0x8f/0x200
> [<ffffffff81425ac2>] system_call_fastpath+0x16/0x1b
>
> Signed-off-by: Sujith Manoharan <[email protected]>

Thanks, all four patches applied. Patch 4 has caused two checkpatch
warnings, I fixed those. If my comment for patch 3 needs action (which I
doubt), please send a followup patch.

Kalle