In QCN9274, RX packet's multicast and broadcast(MCBC) flag is fetched
from RX descriptor's msdu_end info5 member but it is not correct
for QCN9274. Due to this with encryption, ARP request packet is wrongly
marked as MCBC packet and it is sent to mac80211 without setting
RX_FLAG_PN_VALIDATED & RX_FLAG_DECRYPTED flag. This results in packet
getting dropped in mac80211. Hence ping initiated from station to AP
fails.
Fix this by fetching correct MCBC flag in case of QCN9274.
For QC9274 MCBC flag should be fetched from RX descriptor's mpdu_start
info6 member.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: 8f04852e90cb ("wifi: ath12k: Use msdu_end to check MCBC")
Signed-off-by: Raj Kumar Bhagat <[email protected]>
---
drivers/net/wireless/ath/ath12k/hal.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/hal.c b/drivers/net/wireless/ath/ath12k/hal.c
index a489369d8068..1bdab8604db9 100644
--- a/drivers/net/wireless/ath/ath12k/hal.c
+++ b/drivers/net/wireless/ath/ath12k/hal.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/dma-mapping.h>
#include "hal_tx.h"
@@ -449,8 +449,8 @@ static u8 *ath12k_hw_qcn9274_rx_desc_mpdu_start_addr2(struct hal_rx_desc *desc)
static bool ath12k_hw_qcn9274_rx_desc_is_da_mcbc(struct hal_rx_desc *desc)
{
- return __le16_to_cpu(desc->u.qcn9274.msdu_end.info5) &
- RX_MSDU_END_INFO5_DA_IS_MCBC;
+ return __le32_to_cpu(desc->u.qcn9274.mpdu_start.info6) &
+ RX_MPDU_START_INFO6_MCAST_BCAST;
}
static void ath12k_hw_qcn9274_rx_desc_get_dot11_hdr(struct hal_rx_desc *desc,
--
2.34.1