Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
with 0, making MHI use a default size, 64KB, to allocate channel
buffers. This is likely to fail in some scenarios where system
memory is highly fragmented and memory compaction or reclaim is
not allowed.
There is a fail report which is caused by it:
kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb
Workqueue: events_unbound async_run_entry_fn
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x60
warn_alloc+0x13a/0x1b0
? srso_alias_return_thunk+0x5/0xfbef5
? __alloc_pages_direct_compact+0xab/0x210
__alloc_pages_slowpath.constprop.0+0xd3e/0xda0
__alloc_pages+0x32d/0x350
? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
__kmalloc_large_node+0x72/0x110
__kmalloc+0x37c/0x480
? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
__mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
device_for_each_child+0x5c/0xa0
? __pfx_pci_pm_resume+0x10/0x10
ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e]
? srso_alias_return_thunk+0x5/0xfbef5
ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec]
? srso_alias_return_thunk+0x5/0xfbef5
dpm_run_callback+0x8c/0x1e0
device_resume+0x104/0x340
? __pfx_dpm_watchdog_handler+0x10/0x10
async_resume+0x1d/0x30
async_run_entry_fn+0x32/0x120
process_one_work+0x168/0x330
worker_thread+0x2f5/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe8/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Actually those buffers are used only by QMI target -> host communication.
And for WCN6855 and QCA6390, the largest packet size for that is less
than 6KB. So change buf_len field to 8KB, which results in order 1
allocation if page size is 4KB. In this way, we can at least save some
memory, and as well as decrease the possibility of allocation failure
in those scenarios.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Reported-by: Vlastimil Babka <[email protected]>
Closes: https://lore.kernel.org/ath11k/[email protected]/
Signed-off-by: Baochen Qiang <[email protected]>
---
drivers/net/wireless/ath/ath11k/mhi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index b53659145fcf..a5b9ec2ed8f8 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -106,7 +106,7 @@ static struct mhi_controller_config ath11k_mhi_config_qca6390 = {
.max_channels = 128,
.timeout_ms = 2000,
.use_bounce_buf = false,
- .buf_len = 0,
+ .buf_len = 8192,
.num_channels = ARRAY_SIZE(ath11k_mhi_channels_qca6390),
.ch_cfg = ath11k_mhi_channels_qca6390,
.num_events = ARRAY_SIZE(ath11k_mhi_events_qca6390),
base-commit: 707e306f3573fa321ae197d77366578e4566cff5
--
2.25.1
On 2/22/2024 9:31 PM, Baochen Qiang wrote:
> Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
> with 0, making MHI use a default size, 64KB, to allocate channel
> buffers. This is likely to fail in some scenarios where system
> memory is highly fragmented and memory compaction or reclaim is
> not allowed.
>
> There is a fail report which is caused by it:
> kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
> CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb
> Workqueue: events_unbound async_run_entry_fn
> Call Trace:
> <TASK>
> dump_stack_lvl+0x47/0x60
> warn_alloc+0x13a/0x1b0
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? __alloc_pages_direct_compact+0xab/0x210
> __alloc_pages_slowpath.constprop.0+0xd3e/0xda0
> __alloc_pages+0x32d/0x350
> ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> __kmalloc_large_node+0x72/0x110
> __kmalloc+0x37c/0x480
> ? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> __mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> ? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> device_for_each_child+0x5c/0xa0
> ? __pfx_pci_pm_resume+0x10/0x10
> ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e]
> ? srso_alias_return_thunk+0x5/0xfbef5
> ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec]
> ? srso_alias_return_thunk+0x5/0xfbef5
> dpm_run_callback+0x8c/0x1e0
> device_resume+0x104/0x340
> ? __pfx_dpm_watchdog_handler+0x10/0x10
> async_resume+0x1d/0x30
> async_run_entry_fn+0x32/0x120
> process_one_work+0x168/0x330
> worker_thread+0x2f5/0x410
> ? __pfx_worker_thread+0x10/0x10
> kthread+0xe8/0x120
> ? __pfx_kthread+0x10/0x10
> ret_from_fork+0x34/0x50
> ? __pfx_kthread+0x10/0x10
> ret_from_fork_asm+0x1b/0x30
> </TASK>
>
> Actually those buffers are used only by QMI target -> host communication.
> And for WCN6855 and QCA6390, the largest packet size for that is less
> than 6KB. So change buf_len field to 8KB, which results in order 1
> allocation if page size is 4KB. In this way, we can at least save some
> memory, and as well as decrease the possibility of allocation failure
> in those scenarios.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
>
> Reported-by: Vlastimil Babka <[email protected]>
> Closes: https://lore.kernel.org/ath11k/[email protected]/
> Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Baochen Qiang <[email protected]> wrote:
> Currently buf_len field of ath11k_mhi_config_qca6390 is assigned
> with 0, making MHI use a default size, 64KB, to allocate channel
> buffers. This is likely to fail in some scenarios where system
> memory is highly fragmented and memory compaction or reclaim is
> not allowed.
>
> There is a fail report which is caused by it:
> kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
> CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb
> Workqueue: events_unbound async_run_entry_fn
> Call Trace:
> <TASK>
> dump_stack_lvl+0x47/0x60
> warn_alloc+0x13a/0x1b0
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? __alloc_pages_direct_compact+0xab/0x210
> __alloc_pages_slowpath.constprop.0+0xd3e/0xda0
> __alloc_pages+0x32d/0x350
> ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> __kmalloc_large_node+0x72/0x110
> __kmalloc+0x37c/0x480
> ? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> __mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> ? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814]
> device_for_each_child+0x5c/0xa0
> ? __pfx_pci_pm_resume+0x10/0x10
> ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e]
> ? srso_alias_return_thunk+0x5/0xfbef5
> ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec]
> ? srso_alias_return_thunk+0x5/0xfbef5
> dpm_run_callback+0x8c/0x1e0
> device_resume+0x104/0x340
> ? __pfx_dpm_watchdog_handler+0x10/0x10
> async_resume+0x1d/0x30
> async_run_entry_fn+0x32/0x120
> process_one_work+0x168/0x330
> worker_thread+0x2f5/0x410
> ? __pfx_worker_thread+0x10/0x10
> kthread+0xe8/0x120
> ? __pfx_kthread+0x10/0x10
> ret_from_fork+0x34/0x50
> ? __pfx_kthread+0x10/0x10
> ret_from_fork_asm+0x1b/0x30
> </TASK>
>
> Actually those buffers are used only by QMI target -> host communication.
> And for WCN6855 and QCA6390, the largest packet size for that is less
> than 6KB. So change buf_len field to 8KB, which results in order 1
> allocation if page size is 4KB. In this way, we can at least save some
> memory, and as well as decrease the possibility of allocation failure
> in those scenarios.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
>
> Reported-by: Vlastimil Babka <[email protected]>
> Closes: https://lore.kernel.org/ath11k/[email protected]/
> Signed-off-by: Baochen Qiang <[email protected]>
> Acked-by: Jeff Johnson <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
1cca1bddf9ef wifi: ath11k: decrease MHI channel buffer length to 8KB
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches