2024-04-01 03:31:43

by Ping-Ke Shih

[permalink] [raw]
Subject: [PATCH] wifi: rtw88: Set default CQM config if not present

From: Po-Hao Huang <[email protected]>

When wpa_supplicant is initiated by users and not by NetworkManager,
the CQM configuration might not be set. Without this setting, ICs
with connection quality monitor handled by firmware won't detect
connection loss. To fix this we prepare a default setting upon
associated at first, then update again if any is given later.

Signed-off-by: Po-Hao Huang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
---
drivers/net/wireless/realtek/rtw88/fw.c | 14 ++++++++++----
drivers/net/wireless/realtek/rtw88/fw.h | 2 ++
drivers/net/wireless/realtek/rtw88/mac80211.c | 2 ++
3 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index 3f037ddcecf1..ab7d414d0ba6 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -783,12 +783,18 @@ void rtw_fw_beacon_filter_config(struct rtw_dev *rtwdev, bool connect,
static const u8 rssi_min = 0, rssi_max = 100, rssi_offset = 100;
struct rtw_sta_info *si =
sta ? (struct rtw_sta_info *)sta->drv_priv : NULL;
- s32 threshold = bss_conf->cqm_rssi_thold + rssi_offset;
+ s32 thold = RTW_DEFAULT_CQM_THOLD;
+ u32 hyst = RTW_DEFAULT_CQM_HYST;
u8 h2c_pkt[H2C_PKT_SIZE] = {0};

if (!rtw_fw_feature_check(&rtwdev->fw, FW_FEATURE_BCN_FILTER))
return;

+ if (bss_conf->cqm_rssi_thold)
+ thold = bss_conf->cqm_rssi_thold;
+ if (bss_conf->cqm_rssi_hyst)
+ hyst = bss_conf->cqm_rssi_hyst;
+
if (!connect) {
SET_H2C_CMD_ID_CLASS(h2c_pkt, H2C_CMD_BCN_FILTER_OFFLOAD_P1);
SET_BCN_FILTER_OFFLOAD_P1_ENABLE(h2c_pkt, connect);
@@ -805,15 +811,15 @@ void rtw_fw_beacon_filter_config(struct rtw_dev *rtwdev, bool connect,
rtw_fw_send_h2c_command(rtwdev, h2c_pkt);

memset(h2c_pkt, 0, sizeof(h2c_pkt));
- threshold = clamp_t(s32, threshold, rssi_min, rssi_max);
+ thold = clamp_t(s32, thold + rssi_offset, rssi_min, rssi_max);
SET_H2C_CMD_ID_CLASS(h2c_pkt, H2C_CMD_BCN_FILTER_OFFLOAD_P1);
SET_BCN_FILTER_OFFLOAD_P1_ENABLE(h2c_pkt, connect);
SET_BCN_FILTER_OFFLOAD_P1_OFFLOAD_MODE(h2c_pkt,
BCN_FILTER_OFFLOAD_MODE_DEFAULT);
- SET_BCN_FILTER_OFFLOAD_P1_THRESHOLD(h2c_pkt, (u8)threshold);
+ SET_BCN_FILTER_OFFLOAD_P1_THRESHOLD(h2c_pkt, thold);
SET_BCN_FILTER_OFFLOAD_P1_BCN_LOSS_CNT(h2c_pkt, BCN_LOSS_CNT);
SET_BCN_FILTER_OFFLOAD_P1_MACID(h2c_pkt, si->mac_id);
- SET_BCN_FILTER_OFFLOAD_P1_HYST(h2c_pkt, bss_conf->cqm_rssi_hyst);
+ SET_BCN_FILTER_OFFLOAD_P1_HYST(h2c_pkt, hyst);
SET_BCN_FILTER_OFFLOAD_P1_BCN_INTERVAL(h2c_pkt, bss_conf->beacon_int);
rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
}
diff --git a/drivers/net/wireless/realtek/rtw88/fw.h b/drivers/net/wireless/realtek/rtw88/fw.h
index 84e47c71ea12..e999c24e4634 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.h
+++ b/drivers/net/wireless/realtek/rtw88/fw.h
@@ -29,6 +29,8 @@
#define BCN_FILTER_CONNECTION_LOSS 1
#define BCN_FILTER_CONNECTED 2
#define BCN_FILTER_NOTIFY_BEACON_LOSS 3
+#define RTW_DEFAULT_CQM_THOLD -70
+#define RTW_DEFAULT_CQM_HYST 4

#define SCAN_NOTIFY_TIMEOUT msecs_to_jiffies(10)

diff --git a/drivers/net/wireless/realtek/rtw88/mac80211.c b/drivers/net/wireless/realtek/rtw88/mac80211.c
index 7af5bf7fe5b6..0acebbfa13c4 100644
--- a/drivers/net/wireless/realtek/rtw88/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw88/mac80211.c
@@ -386,6 +386,8 @@ static void rtw_ops_bss_info_changed(struct ieee80211_hw *hw,
rtw_coex_media_status_notify(rtwdev, vif->cfg.assoc);
if (rtw_bf_support)
rtw_bf_assoc(rtwdev, vif, conf);
+
+ rtw_fw_beacon_filter_config(rtwdev, true, vif);
} else {
rtw_leave_lps(rtwdev);
rtw_bf_disassoc(rtwdev, vif, conf);
--
2.25.1



2024-04-04 07:53:53

by Ping-Ke Shih

[permalink] [raw]
Subject: Re: [PATCH] wifi: rtw88: Set default CQM config if not present

Ping-Ke Shih <[email protected]> wrote:

> From: Po-Hao Huang <[email protected]>
>
> When wpa_supplicant is initiated by users and not by NetworkManager,
> the CQM configuration might not be set. Without this setting, ICs
> with connection quality monitor handled by firmware won't detect
> connection loss. To fix this we prepare a default setting upon
> associated at first, then update again if any is given later.
>
> Signed-off-by: Po-Hao Huang <[email protected]>
> Signed-off-by: Ping-Ke Shih <[email protected]>

1 patch(es) applied to rtw-next branch of rtw.git, thanks.

2710c919dfb4 wifi: rtw88: Set default CQM config if not present

---
https://github.com/pkshih/rtw.git