Currently, ath12k does not have the ability to set band edge channel power
for WCN7850. In order to support this, ath12k gets band edge channel power
table in ath12k_acpi_dsm_get_data() function and sets pdev_id and
param_type_id, then finally sends these data and
WMI_PDEV_SET_BIOS_INTERFACE_CMDID to firmware to set band edge channel
power.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Lingbo Kong <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
---
drivers/net/wireless/ath/ath12k/acpi.c | 36 ++++++++++++++++++++++++++
drivers/net/wireless/ath/ath12k/acpi.h | 5 ++++
drivers/net/wireless/ath/ath12k/core.h | 1 +
drivers/net/wireless/ath/ath12k/wmi.h | 4 +++
4 files changed, 46 insertions(+)
diff --git a/drivers/net/wireless/ath/ath12k/acpi.c b/drivers/net/wireless/ath/ath12k/acpi.c
index 4af80dd13535..443ba12e01f3 100644
--- a/drivers/net/wireless/ath/ath12k/acpi.c
+++ b/drivers/net/wireless/ath/ath12k/acpi.c
@@ -91,6 +91,18 @@ static int ath12k_acpi_dsm_get_data(struct ath12k_base *ab, int func)
memcpy(&ab->acpi.cca_data, obj->buffer.pointer,
obj->buffer.length);
+ break;
+ case ATH12K_ACPI_DSM_FUNC_INDEX_BAND_EDGE:
+ if (obj->buffer.length != ATH12K_ACPI_DSM_BAND_EDGE_DATA_SIZE) {
+ ath12k_warn(ab, "invalid ACPI DSM band edge data size: %d\n",
+ obj->buffer.length);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ memcpy(&ab->acpi.band_edge_power, obj->buffer.pointer,
+ obj->buffer.length);
+
break;
}
} else {
@@ -334,6 +346,30 @@ int ath12k_acpi_start(struct ath12k_base *ab)
}
}
+ if (ATH12K_ACPI_FUNC_BIT_VALID(ab->acpi,
+ ATH12K_ACPI_FUNC_BIT_BAND_EDGE_CHAN_POWER)) {
+ ret = ath12k_acpi_dsm_get_data(ab, ATH12K_ACPI_DSM_FUNC_INDEX_BAND_EDGE);
+ if (ret) {
+ ath12k_warn(ab, "failed to get ACPI DSM band edge channel power: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (ab->acpi.band_edge_power[0] == ATH12K_ACPI_BAND_EDGE_VERSION &&
+ ab->acpi.band_edge_power[1] == ATH12K_ACPI_BAND_EDGE_ENABLE_FLAG) {
+ ret = ath12k_wmi_set_bios_cmd(ab,
+ WMI_BIOS_PARAM_TYPE_BANDEDGE,
+ ab->acpi.band_edge_power,
+ sizeof(ab->acpi.band_edge_power));
+ if (ret) {
+ ath12k_warn(ab,
+ "failed to set ACPI DSM band edge channel power: %d\n",
+ ret);
+ return ret;
+ }
+ }
+ }
+
status = acpi_install_notify_handler(ACPI_HANDLE(ab->dev),
ACPI_DEVICE_NOTIFY,
ath12k_acpi_dsm_notify, ab);
diff --git a/drivers/net/wireless/ath/ath12k/acpi.h b/drivers/net/wireless/ath/ath12k/acpi.h
index 0879865fd861..39e003d86a48 100644
--- a/drivers/net/wireless/ath/ath12k/acpi.h
+++ b/drivers/net/wireless/ath/ath12k/acpi.h
@@ -14,12 +14,14 @@
#define ATH12K_ACPI_DSM_FUNC_INDEX_CCA 6
#define ATH12K_ACPI_DSM_FUNC_TAS_CFG 8
#define ATH12K_ACPI_DSM_FUNC_TAS_DATA 9
+#define ATH12K_ACPI_DSM_FUNC_INDEX_BAND_EDGE 10
#define ATH12K_ACPI_FUNC_BIT_BIOS_SAR BIT(3)
#define ATH12K_ACPI_FUNC_BIT_GEO_OFFSET BIT(4)
#define ATH12K_ACPI_FUNC_BIT_CCA BIT(5)
#define ATH12K_ACPI_FUNC_BIT_TAS_CFG BIT(7)
#define ATH12K_ACPI_FUNC_BIT_TAS_DATA BIT(8)
+#define ATH12K_ACPI_FUNC_BIT_BAND_EDGE_CHAN_POWER BIT(9)
#define ATH12K_ACPI_NOTIFY_EVENT 0x86
#define ATH12K_ACPI_FUNC_BIT_VALID(_acdata, _func) (((_acdata).func_bit) & (_func))
@@ -30,6 +32,8 @@
#define ATH12K_ACPI_POWER_LIMIT_ENABLE_FLAG 0x1
#define ATH12K_ACPI_CCA_THR_VERSION 0x1
#define ATH12K_ACPI_CCA_THR_ENABLE_FLAG 0x1
+#define ATH12K_ACPI_BAND_EDGE_VERSION 0x1
+#define ATH12K_ACPI_BAND_EDGE_ENABLE_FLAG 0x1
#define ATH12K_ACPI_GEO_OFFSET_DATA_OFFSET 1
#define ATH12K_ACPI_DBS_BACKOFF_DATA_OFFSET 2
@@ -41,6 +45,7 @@
#define ATH12K_ACPI_CCA_THR_OFFSET_LEN 36
#define ATH12K_ACPI_DSM_TAS_DATA_SIZE 69
+#define ATH12K_ACPI_DSM_BAND_EDGE_DATA_SIZE 100
#define ATH12K_ACPI_DSM_TAS_CFG_SIZE 108
#define ATH12K_ACPI_DSM_GEO_OFFSET_DATA_SIZE (ATH12K_ACPI_GEO_OFFSET_DATA_OFFSET + \
diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 0e33cf783f62..3333f88520ce 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -914,6 +914,7 @@ struct ath12k_base {
u8 bios_sar_data[ATH12K_ACPI_DSM_BIOS_SAR_DATA_SIZE];
u8 geo_offset_data[ATH12K_ACPI_DSM_GEO_OFFSET_DATA_SIZE];
u8 cca_data[ATH12K_ACPI_DSM_CCA_DATA_SIZE];
+ u8 band_edge_power[ATH12K_ACPI_DSM_BAND_EDGE_DATA_SIZE];
} acpi;
#endif /* CONFIG_ACPI */
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 6db15a0a4735..b5285ed78534 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -4808,6 +4808,10 @@ enum wmi_bios_param_type {
WMI_BIOS_PARAM_CCA_THRESHOLD_TYPE = 0,
WMI_BIOS_PARAM_TAS_CONFIG_TYPE = 1,
WMI_BIOS_PARAM_TAS_DATA_TYPE = 2,
+
+ /* bandedge control power */
+ WMI_BIOS_PARAM_TYPE_BANDEDGE = 3,
+
WMI_BIOS_PARAM_TYPE_MAX,
};
--
2.34.1