Currently, only the HE IE in management frames is updated with
respect to MU-MIMO configurations, but this change is not
reflected in the hardware. Add support to propagate MU-MIMO
configurations to the hardware as well.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Co-developed-by: Muna Sinada <[email protected]>
Signed-off-by: Muna Sinada <[email protected]>
Signed-off-by: Pradeep Kumar Chitrapu <[email protected]>
---
drivers/net/wireless/ath/ath12k/mac.c | 215 +++++++++++++++++---------
drivers/net/wireless/ath/ath12k/mac.h | 15 ++
drivers/net/wireless/ath/ath12k/wmi.h | 28 +---
3 files changed, 156 insertions(+), 102 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 96dc5c2e096f..5e3b7894d4f4 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -2528,15 +2528,119 @@ static int ath12k_setup_peer_smps(struct ath12k *ar, struct ath12k_vif *arvif,
ath12k_smps_map[smps]);
}
+static int ath12k_mac_set_he_txbf_conf(struct ath12k_vif *arvif)
+{
+ struct ath12k *ar = arvif->ar;
+ u32 param = WMI_VDEV_PARAM_SET_HEMU_MODE;
+ u32 value = 0;
+ int ret;
+
+ if (!arvif->vif->bss_conf.he_support)
+ return 0;
+
+ if (arvif->vif->bss_conf.he_su_beamformer) {
+ value |= u32_encode_bits(HE_SU_BFER_ENABLE, HE_MODE_SU_TX_BFER);
+ if (arvif->vif->bss_conf.he_mu_beamformer &&
+ arvif->vdev_type == WMI_VDEV_TYPE_AP)
+ value |= u32_encode_bits(HE_MU_BFER_ENABLE, HE_MODE_MU_TX_BFER);
+ }
+
+ if (arvif->vif->type != NL80211_IFTYPE_MESH_POINT) {
+ value |= u32_encode_bits(HE_DL_MUOFDMA_ENABLE, HE_MODE_DL_OFDMA) |
+ u32_encode_bits(HE_UL_MUOFDMA_ENABLE, HE_MODE_UL_OFDMA);
+
+ if (arvif->vif->bss_conf.he_full_ul_mumimo)
+ value |= u32_encode_bits(HE_UL_MUMIMO_ENABLE, HE_MODE_UL_MUMIMO);
+
+ if (arvif->vif->bss_conf.he_su_beamformee)
+ value |= u32_encode_bits(HE_SU_BFEE_ENABLE, HE_MODE_SU_TX_BFEE);
+ }
+
+ ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param, value);
+ if (ret) {
+ ath12k_warn(ar->ab, "failed to set vdev %d HE MU mode: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ param = WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE;
+ value = u32_encode_bits(HE_VHT_SOUNDING_MODE_ENABLE, HE_VHT_SOUNDING_MODE) |
+ u32_encode_bits(HE_TRIG_NONTRIG_SOUNDING_MODE_ENABLE,
+ HE_TRIG_NONTRIG_SOUNDING_MODE);
+ ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
+ param, value);
+ if (ret) {
+ ath12k_warn(ar->ab, "failed to set vdev %d sounding mode: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath12k_mac_vif_recalc_sta_he_txbf(struct ath12k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta_he_cap *he_cap,
+ int *hemode)
+{
+ struct ieee80211_he_cap_elem he_cap_elem = {};
+ struct ieee80211_sta_he_cap *cap_band;
+ struct cfg80211_chan_def def;
+
+ if (!vif->bss_conf.he_support)
+ return 0;
+
+ if (vif->type != NL80211_IFTYPE_STATION)
+ return -EINVAL;
+
+ if (WARN_ON(ath12k_mac_vif_chan(vif, &def)))
+ return -EINVAL;
+
+ if (def.chan->band == NL80211_BAND_2GHZ)
+ cap_band = &ar->mac.iftype[NL80211_BAND_2GHZ][vif->type].he_cap;
+ else
+ cap_band = &ar->mac.iftype[NL80211_BAND_5GHZ][vif->type].he_cap;
+
+ memcpy(&he_cap_elem, &cap_band->he_cap_elem, sizeof(he_cap_elem));
+
+ *hemode = 0;
+ if (HECAP_PHY_SUBFME_GET(he_cap_elem.phy_cap_info)) {
+ if (HECAP_PHY_SUBFMR_GET(he_cap->he_cap_elem.phy_cap_info))
+ *hemode |= u32_encode_bits(HE_SU_BFEE_ENABLE, HE_MODE_SU_TX_BFEE);
+ if (HECAP_PHY_MUBFMR_GET(he_cap->he_cap_elem.phy_cap_info))
+ *hemode |= u32_encode_bits(HE_MU_BFEE_ENABLE, HE_MODE_MU_TX_BFEE);
+ }
+
+ if (vif->type != NL80211_IFTYPE_MESH_POINT) {
+ *hemode |= u32_encode_bits(HE_DL_MUOFDMA_ENABLE, HE_MODE_DL_OFDMA) |
+ u32_encode_bits(HE_UL_MUOFDMA_ENABLE, HE_MODE_UL_OFDMA);
+
+ if (HECAP_PHY_ULMUMIMO_GET(he_cap_elem.phy_cap_info))
+ if (HECAP_PHY_ULMUMIMO_GET(he_cap->he_cap_elem.phy_cap_info))
+ *hemode |= u32_encode_bits(HE_UL_MUMIMO_ENABLE,
+ HE_MODE_UL_MUMIMO);
+
+ if (u32_get_bits(*hemode, HE_MODE_MU_TX_BFEE))
+ *hemode |= u32_encode_bits(HE_SU_BFEE_ENABLE, HE_MODE_SU_TX_BFEE);
+
+ if (u32_get_bits(*hemode, HE_MODE_MU_TX_BFER))
+ *hemode |= u32_encode_bits(HE_SU_BFER_ENABLE, HE_MODE_SU_TX_BFER);
+ }
+
+ return 0;
+}
+
static void ath12k_bss_assoc(struct ath12k *ar,
struct ath12k_vif *arvif,
struct ieee80211_bss_conf *bss_conf)
{
struct ieee80211_vif *vif = arvif->vif;
struct ath12k_wmi_peer_assoc_arg peer_arg;
+ struct ieee80211_sta_he_cap he_cap;
struct ieee80211_sta *ap_sta;
struct ath12k_peer *peer;
bool is_auth = false;
+ u32 hemode = 0;
int ret;
lockdep_assert_held(&ar->conf_mutex);
@@ -2556,8 +2660,29 @@ static void ath12k_bss_assoc(struct ath12k *ar,
ath12k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg, false);
+ /* he_cap here is updated at assoc success for sta mode only */
+ he_cap = ap_sta->deflink.he_cap;
+
+ /* ap_sta->deflink.he_cap must be protected by rcu_read_lock */
+ ret = ath12k_mac_vif_recalc_sta_he_txbf(ar, vif, &he_cap, &hemode);
+ if (ret) {
+ ath12k_warn(ar->ab, "failed to recalc he txbf for vdev %i on bss %pM: %d\n",
+ arvif->vdev_id, bss_conf->bssid, ret);
+ rcu_read_unlock();
+ return;
+ }
+
rcu_read_unlock();
+ /* keep this before ath12k_wmi_send_peer_assoc_cmd() */
+ ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_SET_HEMU_MODE, hemode);
+ if (ret) {
+ ath12k_warn(ar->ab, "failed to submit vdev param txbf 0x%x: %d\n",
+ hemode, ret);
+ return;
+ }
+
ret = ath12k_wmi_send_peer_assoc_cmd(ar, &peer_arg);
if (ret) {
ath12k_warn(ar->ab, "failed to run peer assoc for %pM vdev %i: %d\n",
@@ -2884,6 +3009,13 @@ static void ath12k_mac_bss_info_changed(struct ath12k *ar,
ether_addr_copy(arvif->bssid, info->bssid);
if (changed & BSS_CHANGED_BEACON_ENABLED) {
+ if (info->enable_beacon) {
+ ret = ath12k_mac_set_he_txbf_conf(arvif);
+ if (ret)
+ ath12k_warn(ar->ab,
+ "failed to set HE TXBF config for vdev: %d\n",
+ arvif->vdev_id);
+ }
ath12k_control_beaconing(arvif, info);
if (arvif->is_up && vif->bss_conf.he_support &&
@@ -4995,11 +5127,14 @@ static void ath12k_mac_copy_he_cap(struct ath12k_band_cap *band_cap,
he_cap_elem->mac_cap_info[1] &=
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK;
-
+ he_cap_elem->phy_cap_info[0] &=
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+ he_cap_elem->phy_cap_info[0] &=
+ ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
he_cap_elem->phy_cap_info[5] &=
~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
- he_cap_elem->phy_cap_info[5] &=
- ~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK;
he_cap_elem->phy_cap_info[5] |= num_tx_chains - 1;
switch (iftype) {
@@ -5938,71 +6073,6 @@ static void ath12k_mac_setup_vdev_create_arg(struct ath12k_vif *arvif,
arg->if_stats_id = ath12k_mac_get_vdev_stats_id(arvif);
}
-static u32
-ath12k_mac_prepare_he_mode(struct ath12k_pdev *pdev, u32 viftype)
-{
- struct ath12k_pdev_cap *pdev_cap = &pdev->cap;
- struct ath12k_band_cap *cap_band = NULL;
- u32 *hecap_phy_ptr = NULL;
- u32 hemode;
-
- if (pdev->cap.supported_bands & WMI_HOST_WLAN_2G_CAP)
- cap_band = &pdev_cap->band[NL80211_BAND_2GHZ];
- else
- cap_band = &pdev_cap->band[NL80211_BAND_5GHZ];
-
- hecap_phy_ptr = &cap_band->he_cap_phy_info[0];
-
- hemode = u32_encode_bits(HE_SU_BFEE_ENABLE, HE_MODE_SU_TX_BFEE) |
- u32_encode_bits(HECAP_PHY_SUBFMR_GET(hecap_phy_ptr),
- HE_MODE_SU_TX_BFER) |
- u32_encode_bits(HECAP_PHY_ULMUMIMO_GET(hecap_phy_ptr),
- HE_MODE_UL_MUMIMO);
-
- /* TODO: WDS and other modes */
- if (viftype == NL80211_IFTYPE_AP) {
- hemode |= u32_encode_bits(HECAP_PHY_MUBFMR_GET(hecap_phy_ptr),
- HE_MODE_MU_TX_BFER) |
- u32_encode_bits(HE_DL_MUOFDMA_ENABLE, HE_MODE_DL_OFDMA) |
- u32_encode_bits(HE_UL_MUOFDMA_ENABLE, HE_MODE_UL_OFDMA);
- } else {
- hemode |= u32_encode_bits(HE_MU_BFEE_ENABLE, HE_MODE_MU_TX_BFEE);
- }
-
- return hemode;
-}
-
-static int ath12k_set_he_mu_sounding_mode(struct ath12k *ar,
- struct ath12k_vif *arvif)
-{
- u32 param_id, param_value;
- struct ath12k_base *ab = ar->ab;
- int ret;
-
- param_id = WMI_VDEV_PARAM_SET_HEMU_MODE;
- param_value = ath12k_mac_prepare_he_mode(ar->pdev, arvif->vif->type);
- ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
- param_id, param_value);
- if (ret) {
- ath12k_warn(ab, "failed to set vdev %d HE MU mode: %d param_value %x\n",
- arvif->vdev_id, ret, param_value);
- return ret;
- }
- param_id = WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE;
- param_value =
- u32_encode_bits(HE_VHT_SOUNDING_MODE_ENABLE, HE_VHT_SOUNDING_MODE) |
- u32_encode_bits(HE_TRIG_NONTRIG_SOUNDING_MODE_ENABLE,
- HE_TRIG_NONTRIG_SOUNDING_MODE);
- ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
- param_id, param_value);
- if (ret) {
- ath12k_warn(ab, "failed to set vdev %d HE MU mode: %d\n",
- arvif->vdev_id, ret);
- return ret;
- }
- return ret;
-}
-
static void ath12k_mac_update_vif_offload(struct ath12k_vif *arvif)
{
struct ieee80211_vif *vif = arvif->vif;
@@ -6831,7 +6901,6 @@ ath12k_mac_vdev_start_restart(struct ath12k_vif *arvif,
struct ath12k_base *ab = ar->ab;
struct wmi_vdev_start_req_arg arg = {};
const struct cfg80211_chan_def *chandef = &ctx->def;
- int he_support = arvif->vif->bss_conf.he_support;
int ret;
lockdep_assert_held(&ar->conf_mutex);
@@ -6881,14 +6950,6 @@ ath12k_mac_vdev_start_restart(struct ath12k_vif *arvif,
spin_unlock_bh(&ab->base_lock);
/* TODO: Notify if secondary 80Mhz also needs radar detection */
- if (he_support) {
- ret = ath12k_set_he_mu_sounding_mode(ar, arvif);
- if (ret) {
- ath12k_warn(ar->ab, "failed to set he mode vdev %i\n",
- arg.vdev_id);
- return ret;
- }
- }
}
arg.passive |= !!(chandef->chan->flags & IEEE80211_CHAN_NO_IR);
diff --git a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
index 69fd282b9dd3..e5193a44f344 100644
--- a/drivers/net/wireless/ath/ath12k/mac.h
+++ b/drivers/net/wireless/ath/ath12k/mac.h
@@ -40,6 +40,21 @@ struct ath12k_generic_iter {
#define ATH12K_TX_POWER_MAX_VAL 70
#define ATH12K_TX_POWER_MIN_VAL 0
+#define HECAP_PHY_SUBFMR_GET(hecap_phy) \
+ u8_get_bits(hecap_phy[3], IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER)
+
+#define HECAP_PHY_SUBFME_GET(hecap_phy) \
+ u8_get_bits(hecap_phy[4], IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE)
+
+#define HECAP_PHY_MUBFMR_GET(hecap_phy) \
+ u8_get_bits(hecap_phy[4], IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER)
+
+#define HECAP_PHY_ULMUMIMO_GET(hecap_phy) \
+ u8_get_bits(hecap_phy[2], IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO)
+
+#define HECAP_PHY_ULOFDMA_GET(hecap_phy) \
+ u8_get_bits(hecap_phy[2], IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO)
+
enum ath12k_supported_bw {
ATH12K_BW_20 = 0,
ATH12K_BW_40 = 1,
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 496866673aea..03aab0531aa4 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -2968,31 +2968,6 @@ struct ath12k_wmi_rx_reorder_queue_remove_arg {
#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
-#define HECAP_PHYDWORD_0 0
-#define HECAP_PHYDWORD_1 1
-#define HECAP_PHYDWORD_2 2
-
-#define HECAP_PHY_SU_BFER BIT(31)
-#define HECAP_PHY_SU_BFEE BIT(0)
-#define HECAP_PHY_MU_BFER BIT(1)
-#define HECAP_PHY_UL_MUMIMO BIT(22)
-#define HECAP_PHY_UL_MUOFDMA BIT(23)
-
-#define HECAP_PHY_SUBFMR_GET(hecap_phy) \
- u32_get_bits(hecap_phy[HECAP_PHYDWORD_0], HECAP_PHY_SU_BFER)
-
-#define HECAP_PHY_SUBFME_GET(hecap_phy) \
- u32_get_bits(hecap_phy[HECAP_PHYDWORD_1], HECAP_PHY_SU_BFEE)
-
-#define HECAP_PHY_MUBFMR_GET(hecap_phy) \
- u32_get_bits(hecap_phy[HECAP_PHYDWORD_1], HECAP_PHY_MU_BFER)
-
-#define HECAP_PHY_ULMUMIMO_GET(hecap_phy) \
- u32_get_bits(hecap_phy[HECAP_PHYDWORD_0], HECAP_PHY_UL_MUMIMO)
-
-#define HECAP_PHY_ULOFDMA_GET(hecap_phy) \
- u32_get_bits(hecap_phy[HECAP_PHYDWORD_0], HECAP_PHY_UL_MUOFDMA)
-
#define HE_MODE_SU_TX_BFEE BIT(0)
#define HE_MODE_SU_TX_BFER BIT(1)
#define HE_MODE_MU_TX_BFEE BIT(2)
@@ -3004,8 +2979,11 @@ struct ath12k_wmi_rx_reorder_queue_remove_arg {
#define HE_DL_MUOFDMA_ENABLE 1
#define HE_UL_MUOFDMA_ENABLE 1
#define HE_DL_MUMIMO_ENABLE 1
+#define HE_UL_MUMIMO_ENABLE 1
#define HE_MU_BFEE_ENABLE 1
#define HE_SU_BFEE_ENABLE 1
+#define HE_MU_BFER_ENABLE 1
+#define HE_SU_BFER_ENABLE 1
#define HE_VHT_SOUNDING_MODE_ENABLE 1
#define HE_SU_MU_SOUNDING_MODE_ENABLE 1
--
2.17.1
On 5/7/2024 5:20 PM, Pradeep Kumar Chitrapu wrote:
> Currently, only the HE IE in management frames is updated with
> respect to MU-MIMO configurations, but this change is not
> reflected in the hardware. Add support to propagate MU-MIMO
> configurations to the hardware as well.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
>
> Co-developed-by: Muna Sinada <[email protected]>
> Signed-off-by: Muna Sinada <[email protected]>
> Signed-off-by: Pradeep Kumar Chitrapu <[email protected]>
Acked-by: Jeff Johnson <[email protected]>