From: Johannes Berg <[email protected]>
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that.
Reported-by: [email protected]
Signed-off-by: Johannes Berg <[email protected]>
---
net/wireless/nl80211.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3c0bca4238d3..93c313149f57 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3415,6 +3415,33 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
if (chandef.chan != cur_chan)
return -EBUSY;
+ /* only allow this for regular channel widths */
+ switch (wdev->links[link_id].ap.chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_40:
+ case NL80211_CHAN_WIDTH_80:
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ case NL80211_CHAN_WIDTH_320:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_40:
+ case NL80211_CHAN_WIDTH_80:
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ case NL80211_CHAN_WIDTH_320:
+ break;
+ default:
+ return -EINVAL;
+ }
+
result = rdev_set_ap_chanwidth(rdev, dev, link_id,
&chandef);
if (result)
--
2.45.0