From: Johannes Berg <[email protected]>
Use BIT(x) instead of 1<<x, in part because it's mostly
missing spaces anyway, in part because it reads nicer.
Reviewed-by: Miriam Rachel Korenblit <[email protected]>
Reviewed-by: Ilan Peer <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
---
include/net/cfg80211.h | 102 ++++++++++++++++++++---------------------
1 file changed, 51 insertions(+), 51 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d79180bec7a1..08d49fc6a55f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -127,31 +127,31 @@ struct wiphy;
* even if it is otherwise disabled.
*/
enum ieee80211_channel_flags {
- IEEE80211_CHAN_DISABLED = 1<<0,
- IEEE80211_CHAN_NO_IR = 1<<1,
- IEEE80211_CHAN_PSD = 1<<2,
- IEEE80211_CHAN_RADAR = 1<<3,
- IEEE80211_CHAN_NO_HT40PLUS = 1<<4,
- IEEE80211_CHAN_NO_HT40MINUS = 1<<5,
- IEEE80211_CHAN_NO_OFDM = 1<<6,
- IEEE80211_CHAN_NO_80MHZ = 1<<7,
- IEEE80211_CHAN_NO_160MHZ = 1<<8,
- IEEE80211_CHAN_INDOOR_ONLY = 1<<9,
- IEEE80211_CHAN_IR_CONCURRENT = 1<<10,
- IEEE80211_CHAN_NO_20MHZ = 1<<11,
- IEEE80211_CHAN_NO_10MHZ = 1<<12,
- IEEE80211_CHAN_NO_HE = 1<<13,
- IEEE80211_CHAN_1MHZ = 1<<14,
- IEEE80211_CHAN_2MHZ = 1<<15,
- IEEE80211_CHAN_4MHZ = 1<<16,
- IEEE80211_CHAN_8MHZ = 1<<17,
- IEEE80211_CHAN_16MHZ = 1<<18,
- IEEE80211_CHAN_NO_320MHZ = 1<<19,
- IEEE80211_CHAN_NO_EHT = 1<<20,
- IEEE80211_CHAN_DFS_CONCURRENT = 1<<21,
- IEEE80211_CHAN_NO_6GHZ_VLP_CLIENT = 1<<22,
- IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT = 1<<23,
- IEEE80211_CHAN_CAN_MONITOR = 1<<24,
+ IEEE80211_CHAN_DISABLED = BIT(0),
+ IEEE80211_CHAN_NO_IR = BIT(1),
+ IEEE80211_CHAN_PSD = BIT(2),
+ IEEE80211_CHAN_RADAR = BIT(3),
+ IEEE80211_CHAN_NO_HT40PLUS = BIT(4),
+ IEEE80211_CHAN_NO_HT40MINUS = BIT(5),
+ IEEE80211_CHAN_NO_OFDM = BIT(6),
+ IEEE80211_CHAN_NO_80MHZ = BIT(7),
+ IEEE80211_CHAN_NO_160MHZ = BIT(8),
+ IEEE80211_CHAN_INDOOR_ONLY = BIT(9),
+ IEEE80211_CHAN_IR_CONCURRENT = BIT(10),
+ IEEE80211_CHAN_NO_20MHZ = BIT(11),
+ IEEE80211_CHAN_NO_10MHZ = BIT(12),
+ IEEE80211_CHAN_NO_HE = BIT(13),
+ IEEE80211_CHAN_1MHZ = BIT(14),
+ IEEE80211_CHAN_2MHZ = BIT(15),
+ IEEE80211_CHAN_4MHZ = BIT(16),
+ IEEE80211_CHAN_8MHZ = BIT(17),
+ IEEE80211_CHAN_16MHZ = BIT(18),
+ IEEE80211_CHAN_NO_320MHZ = BIT(19),
+ IEEE80211_CHAN_NO_EHT = BIT(20),
+ IEEE80211_CHAN_DFS_CONCURRENT = BIT(21),
+ IEEE80211_CHAN_NO_6GHZ_VLP_CLIENT = BIT(22),
+ IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT = BIT(23),
+ IEEE80211_CHAN_CAN_MONITOR = BIT(24),
};
#define IEEE80211_CHAN_NO_HT40 \
@@ -229,13 +229,13 @@ struct ieee80211_channel {
* @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode
*/
enum ieee80211_rate_flags {
- IEEE80211_RATE_SHORT_PREAMBLE = 1<<0,
- IEEE80211_RATE_MANDATORY_A = 1<<1,
- IEEE80211_RATE_MANDATORY_B = 1<<2,
- IEEE80211_RATE_MANDATORY_G = 1<<3,
- IEEE80211_RATE_ERP_G = 1<<4,
- IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5,
- IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6,
+ IEEE80211_RATE_SHORT_PREAMBLE = BIT(0),
+ IEEE80211_RATE_MANDATORY_A = BIT(1),
+ IEEE80211_RATE_MANDATORY_B = BIT(2),
+ IEEE80211_RATE_MANDATORY_G = BIT(3),
+ IEEE80211_RATE_ERP_G = BIT(4),
+ IEEE80211_RATE_SUPPORTS_5MHZ = BIT(5),
+ IEEE80211_RATE_SUPPORTS_10MHZ = BIT(6),
};
/**
@@ -1957,9 +1957,9 @@ struct rate_info {
* @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
*/
enum bss_param_flags {
- BSS_PARAM_FLAGS_CTS_PROT = 1<<0,
- BSS_PARAM_FLAGS_SHORT_PREAMBLE = 1<<1,
- BSS_PARAM_FLAGS_SHORT_SLOT_TIME = 1<<2,
+ BSS_PARAM_FLAGS_CTS_PROT = BIT(0),
+ BSS_PARAM_FLAGS_SHORT_PREAMBLE = BIT(1),
+ BSS_PARAM_FLAGS_SHORT_SLOT_TIME = BIT(2),
};
/**
@@ -2266,13 +2266,13 @@ static inline int cfg80211_get_station(struct net_device *dev,
* @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address
*/
enum monitor_flags {
- MONITOR_FLAG_CHANGED = 1<<__NL80211_MNTR_FLAG_INVALID,
- MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL,
- MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL,
- MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL,
- MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS,
- MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
- MONITOR_FLAG_ACTIVE = 1<<NL80211_MNTR_FLAG_ACTIVE,
+ MONITOR_FLAG_CHANGED = BIT(__NL80211_MNTR_FLAG_INVALID),
+ MONITOR_FLAG_FCSFAIL = BIT(NL80211_MNTR_FLAG_FCSFAIL),
+ MONITOR_FLAG_PLCPFAIL = BIT(NL80211_MNTR_FLAG_PLCPFAIL),
+ MONITOR_FLAG_CONTROL = BIT(NL80211_MNTR_FLAG_CONTROL),
+ MONITOR_FLAG_OTHER_BSS = BIT(NL80211_MNTR_FLAG_OTHER_BSS),
+ MONITOR_FLAG_COOK_FRAMES = BIT(NL80211_MNTR_FLAG_COOK_FRAMES),
+ MONITOR_FLAG_ACTIVE = BIT(NL80211_MNTR_FLAG_ACTIVE),
};
/**
@@ -3399,15 +3399,15 @@ enum cfg80211_connect_params_changed {
* @WIPHY_PARAM_TXQ_QUANTUM: TXQ scheduler quantum
*/
enum wiphy_params_flags {
- WIPHY_PARAM_RETRY_SHORT = 1 << 0,
- WIPHY_PARAM_RETRY_LONG = 1 << 1,
- WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2,
- WIPHY_PARAM_RTS_THRESHOLD = 1 << 3,
- WIPHY_PARAM_COVERAGE_CLASS = 1 << 4,
- WIPHY_PARAM_DYN_ACK = 1 << 5,
- WIPHY_PARAM_TXQ_LIMIT = 1 << 6,
- WIPHY_PARAM_TXQ_MEMORY_LIMIT = 1 << 7,
- WIPHY_PARAM_TXQ_QUANTUM = 1 << 8,
+ WIPHY_PARAM_RETRY_SHORT = BIT(0),
+ WIPHY_PARAM_RETRY_LONG = BIT(1),
+ WIPHY_PARAM_FRAG_THRESHOLD = BIT(2),
+ WIPHY_PARAM_RTS_THRESHOLD = BIT(3),
+ WIPHY_PARAM_COVERAGE_CLASS = BIT(4),
+ WIPHY_PARAM_DYN_ACK = BIT(5),
+ WIPHY_PARAM_TXQ_LIMIT = BIT(6),
+ WIPHY_PARAM_TXQ_MEMORY_LIMIT = BIT(7),
+ WIPHY_PARAM_TXQ_QUANTUM = BIT(8),
};
#define IEEE80211_DEFAULT_AIRTIME_WEIGHT 256
--
2.45.1