In the dmesg is showing the message "failed to read out thermal zone"
as if the temperature read is failed by don't find the thermal zone.
After researching and debugging, I see that this specific error is
occurrenced because the thermal try read the temperature when is started,
but the firmware is not running yet.
For more legibiliti i change the tt.c for return EAGAIN when this was occurrence.
After this change, in my computer I compile and install kernel in /boot
and in my dmesg the message "failed to read out thermal zone" is not show
any more.
I would like to thanks for Rafael Wysocki <[email protected]> ,
Kalle Valo <[email protected]> and Johannes Berg <[email protected]>
for your suggestions in my previous patch.
Signed-off-by: Guilherme Giacomo Simoes <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
index 8083c4b2ab6b..9aa9e3be39b8 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
@@ -620,8 +620,14 @@ static int iwl_mvm_tzone_get_temp(struct thermal_zone_device *device,
mutex_lock(&mvm->mutex);
- if (!iwl_mvm_firmware_running(mvm) ||
- mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
+ int res = iwl_mvm_firmware_running(mvm);
+
+ if (!res) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ if (mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
ret = -ENODATA;
goto out;
}
--
2.45.2