From: Rajkumar Manoharan <[email protected]>
Enable WLAN and BT mode for switching regulator discontinuous
orverride for AR9462 chips.
Signed-off-by: Rajkumar Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 4 ++++
drivers/net/wireless/ath/ath9k/hw.h | 1 -
drivers/net/wireless/ath/ath9k/reg.h | 2 ++
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 11abb97..d6baf69 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -676,6 +676,10 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
if (chan->channel == 2484)
ar9003_hw_prog_ini(ah, &ah->ini_japan2484, 1);
+ if (AR_SREV_9462(ah))
+ REG_WRITE(ah, AR_GLB_SWREG_DISCONT_MODE,
+ AR_GLB_SWREG_DISCONT_EN_BT_WLAN);
+
ah->modes_index = modesIndex;
ar9003_hw_override_ini(ah);
ar9003_hw_set_channel_regs(ah, chan);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 3740aab..03d5909 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -824,7 +824,6 @@ struct ath_hw {
struct ar5416IniArray ini_japan2484;
struct ar5416IniArray iniModes_9271_ANI_reg;
struct ar5416IniArray ini_radio_post_sys2ant;
- struct ar5416IniArray ini_BTCOEX_MAX_TXPWR;
struct ar5416IniArray iniMac[ATH_INI_NUM_SPLIT];
struct ar5416IniArray iniBB[ATH_INI_NUM_SPLIT];
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 458f81b..560d6ef 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -2211,5 +2211,7 @@ enum {
#define AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT 0x00000fff
#define AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT_S 0
+#define AR_GLB_SWREG_DISCONT_MODE 0x2002c
+#define AR_GLB_SWREG_DISCONT_EN_BT_WLAN 0x3
#endif
--
1.7.10.3