Take care of AP bridging;
and fix NAPI behavior
Vladimir Kondratiev (3):
wil6210: NAPI completion refactor
wil6210: re-submit Rx frames to the wireless media if appropriate
wil6210: support AP isolation
drivers/net/wireless/ath/wil6210/cfg80211.c | 16 +++++++
drivers/net/wireless/ath/wil6210/debugfs.c | 1 +
drivers/net/wireless/ath/wil6210/main.c | 1 +
drivers/net/wireless/ath/wil6210/netdev.c | 4 +-
drivers/net/wireless/ath/wil6210/txrx.c | 72 +++++++++++++++++++++++------
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
6 files changed, 79 insertions(+), 16 deletions(-)
--
2.1.0
For the AP, configuration may say not to bridge traffic between
wireless clients. This is conveyed from user space (ex: hostapd has
ap_isolate parameter) with NL80211_CMD_SET_BSS, to the driver's
cfg80211 ops method change_bss
Add support for this setting.
Signed-off-by: Vladimir Kondratiev <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 16 ++++++++++++++++
drivers/net/wireless/ath/wil6210/debugfs.c | 1 +
drivers/net/wireless/ath/wil6210/main.c | 1 +
drivers/net/wireless/ath/wil6210/txrx.c | 2 +-
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
5 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 4bd708c..5db6a6d 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -917,6 +917,21 @@ static int wil_cfg80211_probe_client(struct wiphy *wiphy,
return 0;
}
+static int wil_cfg80211_change_bss(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct bss_parameters *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ if (params->ap_isolate >= 0) {
+ wil_dbg_misc(wil, "%s(ap_isolate %d => %d)\n", __func__,
+ wil->ap_isolate, params->ap_isolate);
+ wil->ap_isolate = params->ap_isolate;
+ }
+
+ return 0;
+}
+
static struct cfg80211_ops wil_cfg80211_ops = {
.scan = wil_cfg80211_scan,
.connect = wil_cfg80211_connect,
@@ -937,6 +952,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
.stop_ap = wil_cfg80211_stop_ap,
.del_station = wil_cfg80211_del_station,
.probe_client = wil_cfg80211_probe_client,
+ .change_bss = wil_cfg80211_change_bss,
};
static void wil_wiphy_init(struct wiphy *wiphy)
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 3830cc2..a42cb89 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1405,6 +1405,7 @@ static const struct dbg_off dbg_wil_off[] = {
WIL_FIELD(fw_version, S_IRUGO, doff_u32),
WIL_FIELD(hw_version, S_IRUGO, doff_x32),
WIL_FIELD(recovery_count, S_IRUGO, doff_u32),
+ WIL_FIELD(ap_isolate, S_IRUGO, doff_u32),
{},
};
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index db74e81..afff8d3 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -714,6 +714,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
/* init after reset */
wil->pending_connect_cid = -1;
+ wil->ap_isolate = 0;
reinit_completion(&wil->wmi_ready);
reinit_completion(&wil->wmi_call);
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 08d3cac..689081c 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -515,7 +515,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
skb_orphan(skb);
- if (wdev->iftype == NL80211_IFTYPE_AP) {
+ if (wdev->iftype == NL80211_IFTYPE_AP && !wil->ap_isolate) {
if (mcast) {
/* send multicast frames both to higher layers in
* local net stack and back to the wireless medium
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b6e65c3..c1a71ab 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -542,6 +542,7 @@ struct wil6210_priv {
u32 monitor_flags;
u32 privacy; /* secure connection? */
int sinfo_gen;
+ u32 ap_isolate; /* no intra-BSS communication */
/* interrupt moderation */
u32 tx_max_burst_duration;
u32 tx_interframe_timeout;
--
2.1.0
It is expected that driver completes NAPI when less than
full budget is consumed.
Fulfill this requirement.
Signed-off-by: Vladimir Kondratiev <[email protected]>
---
drivers/net/wireless/ath/wil6210/netdev.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index ace30c1..f2f7ea2 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -82,7 +82,7 @@ static int wil6210_netdev_poll_rx(struct napi_struct *napi, int budget)
wil_rx_handle(wil, "a);
done = budget - quota;
- if (done <= 1) { /* burst ends - only one packet processed */
+ if (done < budget) {
napi_complete(napi);
wil6210_unmask_irq_rx(wil);
wil_dbg_txrx(wil, "NAPI RX complete\n");
@@ -110,7 +110,7 @@ static int wil6210_netdev_poll_tx(struct napi_struct *napi, int budget)
tx_done += wil_tx_complete(wil, i);
}
- if (tx_done <= 1) { /* burst ends - only one packet processed */
+ if (tx_done < budget) {
napi_complete(napi);
wil6210_unmask_irq_tx(wil);
wil_dbg_txrx(wil, "NAPI TX complete\n");
--
2.1.0
On Sunday, March 15, 2015 04:00:15 PM Vladimir Kondratiev wrote:
> t is expected that driver completes NAPI when less than
> full budget is consumed.
>
> Fulfill this requirement.
>
> Signed-off-by: Vladimir Kondratiev <[email protected]>
>
Please ignore, old patch, sent by mistake.
This is for AP only. If Rx data frame targeted to one of associated clients,
transmit it back to the wireless media and don't deliver to the host.
For the multicast frames, deliver to both host and wireless media.
Signed-off-by: Vladimir Kondratiev <[email protected]>
---
drivers/net/wireless/ath/wil6210/txrx.c | 72 ++++++++++++++++++++++++++-------
1 file changed, 58 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 7f2f560..08d3cac 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -492,17 +492,71 @@ static int wil_rx_refill(struct wil6210_priv *wil, int count)
*/
void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
{
- gro_result_t rc;
+ gro_result_t rc = GRO_NORMAL;
struct wil6210_priv *wil = ndev_to_wil(ndev);
+ struct wireless_dev *wdev = wil_to_wdev(wil);
unsigned int len = skb->len;
struct vring_rx_desc *d = wil_skb_rxdesc(skb);
int cid = wil_rxdesc_cid(d);
+ struct ethhdr *eth = (void *)skb->data;
+ /* here looking for DA, not A1, thus Rxdesc's 'mcast' indication
+ * is not suitable, need to look at data
+ */
+ int mcast = is_multicast_ether_addr(eth->h_dest);
struct wil_net_stats *stats = &wil->sta[cid].stats;
+ struct sk_buff *xmit_skb = NULL;
+ static const char * const gro_res_str[] = {
+ [GRO_MERGED] = "GRO_MERGED",
+ [GRO_MERGED_FREE] = "GRO_MERGED_FREE",
+ [GRO_HELD] = "GRO_HELD",
+ [GRO_NORMAL] = "GRO_NORMAL",
+ [GRO_DROP] = "GRO_DROP",
+ };
skb_orphan(skb);
- rc = napi_gro_receive(&wil->napi_rx, skb);
+ if (wdev->iftype == NL80211_IFTYPE_AP) {
+ if (mcast) {
+ /* send multicast frames both to higher layers in
+ * local net stack and back to the wireless medium
+ */
+ xmit_skb = skb_copy(skb, GFP_ATOMIC);
+ } else {
+ int xmit_cid = wil_find_cid(wil, eth->h_dest);
+
+ if (xmit_cid >= 0) {
+ /* The destination station is associated to
+ * this AP (in this VLAN), so send the frame
+ * directly to it and do not pass it to local
+ * net stack.
+ */
+ xmit_skb = skb;
+ skb = NULL;
+ }
+ }
+ }
+ if (xmit_skb) {
+ /* Send to wireless media and increase priority by 256 to
+ * keep the received priority instead of reclassifying
+ * the frame (see cfg80211_classify8021d).
+ */
+ xmit_skb->dev = ndev;
+ xmit_skb->priority += 256;
+ xmit_skb->protocol = htons(ETH_P_802_3);
+ skb_reset_network_header(xmit_skb);
+ skb_reset_mac_header(xmit_skb);
+ wil_dbg_txrx(wil, "Rx -> Tx %d bytes\n", len);
+ dev_queue_xmit(xmit_skb);
+ }
+
+ if (skb) { /* deliver to local stack */
+ skb->protocol = eth_type_trans(skb, ndev);
+ rc = napi_gro_receive(&wil->napi_rx, skb);
+ wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
+ len, gro_res_str[rc]);
+ }
+ /* statistics. rc set to GRO_NORMAL for AP bridging */
if (unlikely(rc == GRO_DROP)) {
ndev->stats.rx_dropped++;
stats->rx_dropped++;
@@ -512,17 +566,8 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
stats->rx_packets++;
ndev->stats.rx_bytes += len;
stats->rx_bytes += len;
- }
- {
- static const char * const gro_res_str[] = {
- [GRO_MERGED] = "GRO_MERGED",
- [GRO_MERGED_FREE] = "GRO_MERGED_FREE",
- [GRO_HELD] = "GRO_HELD",
- [GRO_NORMAL] = "GRO_NORMAL",
- [GRO_DROP] = "GRO_DROP",
- };
- wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
- len, gro_res_str[rc]);
+ if (mcast)
+ ndev->stats.multicast++;
}
}
@@ -553,7 +598,6 @@ void wil_rx_handle(struct wil6210_priv *wil, int *quota)
skb->protocol = htons(ETH_P_802_2);
wil_netif_rx_any(skb, ndev);
} else {
- skb->protocol = eth_type_trans(skb, ndev);
wil_rx_reorder(wil, skb);
}
}
--
2.1.0
Vladimir Kondratiev <[email protected]> writes:
> On Sunday, March 15, 2015 04:00:15 PM Vladimir Kondratiev wrote:
>> t is expected that driver completes NAPI when less than
>> full budget is consumed.
>>
>> Fulfill this requirement.
>>
>> Signed-off-by: Vladimir Kondratiev <[email protected]>
>>
> Please ignore, old patch, sent by mistake.
Ok, I dropped the three old patches from my queue.
--
Kalle Valo
> It is expected that driver completes NAPI when less than
> full budget is consumed.
>
> Fulfill this requirement.
>
> Signed-off-by: Vladimir Kondratiev <[email protected]>
Thanks, 3 patches applied to wireless-drivers-next.git:
7308a20e7579 wil6210: NAPI completion refactor
c42da9993a4c wil6210: re-submit Rx frames to the wireless media if appropriate
02beaf1a5b8f wil6210: support AP isolation
Kalle Valo