Force chain 1 to be used for CCK rates since the target power
table stored in EEPROM is too high to transmit with both chains.
This is needed to avoid regulatory violation.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 2 ++
drivers/net/wireless/ath/ath9k/xmit.c | 4 ++++
2 files changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 8e27f4f..dfe6a47 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -173,6 +173,8 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
#define ATH_AN_2_TID(_an, _tidno) (&(_an)->tid[(_tidno)])
+#define IS_CCK_RATE(rate) ((rate >= 0x18) && (rate <= 0x1e))
+
#define ATH_TX_COMPLETE_POLL_INT 1000
enum ATH_AGGR_STATUS {
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b088fa0..36618e3 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1820,10 +1820,14 @@ u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate)
{
struct ath_hw *ah = sc->sc_ah;
struct ath9k_channel *curchan = ah->curchan;
+
if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) &&
(curchan->channelFlags & CHANNEL_5GHZ) &&
(chainmask == 0x7) && (rate < 0x90))
return 0x3;
+ else if (AR_SREV_9462(ah) && ath9k_hw_btcoex_is_enabled(ah) &&
+ IS_CCK_RATE(rate))
+ return 0x2;
else
return chainmask;
}
--
1.7.12