From: Sven Eckelmann <[email protected]>
Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. hwsim can be used to assist initial development of these
features without having access to HW.
Signed-off-by: Sven Eckelmann <[email protected]>
Forwarded: https://patchwork.kernel.org/patch/11029301/
---
drivers/net/wireless/mac80211_hwsim.c | 283 +++++++++++++++++---------
1 file changed, 189 insertions(+), 94 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 519b4ee88c5c..a3913b75d715 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2496,116 +2496,211 @@ static void hwsim_mcast_new_radio(int id, struct genl_info *info,
nlmsg_free(mcast_skb);
}
-static const struct ieee80211_sband_iftype_data he_capa_2ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_2ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xffff),
- .tx_mcs_160 = cpu_to_le16(0xffff),
- .rx_mcs_80p80 = cpu_to_le16(0xffff),
- .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
},
+#endif
};
-static const struct ieee80211_sband_iftype_data he_capa_5ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[0] =
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_5ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xfffa),
- .tx_mcs_160 = cpu_to_le16(0xfffa),
- .rx_mcs_80p80 = cpu_to_le16(0xfffa),
- .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
},
+#endif
};
static void mac80211_hswim_he_capab(struct ieee80211_supported_band *sband)
{
- if (sband->band == NL80211_BAND_2GHZ)
+ u16 n_iftype_data;
+
+ if (sband->band == NL80211_BAND_2GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_2ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_2ghz;
- else if (sband->band == NL80211_BAND_5GHZ)
+ (struct ieee80211_sband_iftype_data *)he_capa_2ghz;
+ } else if (sband->band == NL80211_BAND_5GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_5ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_5ghz;
- else
+ (struct ieee80211_sband_iftype_data *)he_capa_5ghz;
+ } else {
return;
+ }
- sband->n_iftype_data = 1;
+ sband->n_iftype_data = n_iftype_data;
}
#ifdef CONFIG_MAC80211_MESH
--
2.20.1
On Wed, 2019-07-24 at 18:33 +0200, Sven Eckelmann wrote:
> From: Sven Eckelmann <[email protected]>
>
> Some features of 802.11ax without central organizing (AP) STA can also be
> used in mesh mode. hwsim can be used to assist initial development of these
> features without having access to HW.
>
> Signed-off-by: Sven Eckelmann <[email protected]>
Even with the tshark workaround in place, this breaks 68 mesh-related
tests in hwsim tests. Jouni says only 3 use tshark ...
johannes
On Friday, 26 July 2019 15:26:32 CEST Johannes Berg wrote:
> On Wed, 2019-07-24 at 18:33 +0200, Sven Eckelmann wrote:
> > From: Sven Eckelmann <[email protected]>
> >
> > Some features of 802.11ax without central organizing (AP) STA can also be
> > used in mesh mode. hwsim can be used to assist initial development of these
> > features without having access to HW.
> >
> > Signed-off-by: Sven Eckelmann <[email protected]>
>
> Even with the tshark workaround in place, this breaks 68 mesh-related
> tests in hwsim tests. Jouni says only 3 use tshark ...
As I already wrote:
> The first three things looks like wpa_supplicant problems. Seems to be
> caused by the way HE forces VHT to be enabled and now the tests fail
> which try to disable VHT. There was already a patch [0] for that but it
> wasn't considered a good solution.
> But beside these three things there are various other problems in
> > wpa_supplicant regarding HE with pending patches. So I've used
> wpa_supplicant 91b6eba7732354ed3dfe0aa9715dc4c0746e3336 with two
> additional patches [1,2] and increased the VM memory to 1024 MB. Also
> wireshark (tshark to be more precise) had to be updated to
> v3.1.0rc0-1192-gf64990438c
[...]
> [0] https://patchwork.ozlabs.org/patch/1125305/
> [1] https://patchwork.ozlabs.org/patch/1125314/
> [2] https://patchwork.ozlabs.org/patch/1125322/
Kind regards,
Sven
On Fri, 2019-07-26 at 15:31 +0200, Sven Eckelmann wrote:
> As I already wrote:
>
> > The first three things looks like wpa_supplicant problems. Seems to be
> > caused by the way HE forces VHT to be enabled and now the tests fail
> > which try to disable VHT. There was already a patch [0] for that but it
> > wasn't considered a good solution.
> > But beside these three things there are various other problems in
> > > wpa_supplicant regarding HE with pending patches. So I've used
> > wpa_supplicant 91b6eba7732354ed3dfe0aa9715dc4c0746e3336 with two
> > additional patches [1,2] and increased the VM memory to 1024 MB. Also
> > wireshark (tshark to be more precise) had to be updated to
> > v3.1.0rc0-1192-gf64990438c
Ok, dunno. But I don't really want to break everything in the hwsim
tests, even if the kernel patch may be correct ... so I guess I'll wait
until you resubmit after some fixes go into wpa_s?
johannes
On Friday, 26 July 2019 15:32:50 CEST Johannes Berg wrote:
[...]
> Ok, dunno. But I don't really want to break everything in the hwsim
> tests, even if the kernel patch may be correct ... so I guess I'll wait
> until you resubmit after some fixes go into wpa_s?
Ok, will try to do this. Seems like Jouni merged parts of the patches but
there are still things pending.
Btw. with the patches, I see following things broken in the test suite (single
run):
failed tests: ibss_5ghz fst_sta_tear_down_session_bad_fsts_id tnc_peap_soh
tnc_peap_soh_errors tnc_ttls tnc_ttls_fragmentation tnc_fast
p2p_set_discoverability ap_ft_vlan_disconnected ap_ft_eap_vlan_multi
ap_ft_ptk_rekey ap_acs_exclude_dfs discovery_while_go_p2p_dev
go_neg_forced_freq_diff_than_bss_freq p2p_go_move_reg_change
p2ps_stale_group_removal2 p2ps_channel_active_go_and_station_different_mcc
radius_acct_interim_unreachable mesh_secure_ocv_mix_legacy
mesh_secure_ocv_mix_ht wpas_mesh_open_ht40 wpas_mesh_gate_forwarding olbc_5ghz
ap_ht40_csa ap_ht40_csa3 ap_ht_op_class_124 wpas_ap_dfs proxyarp_open_ebtables
dpp_test_vector_p_521
Without the patches, I see following (single run):
failed tests: concurrent_grpform_while_connecting2
fst_sta_remove_session_established fst_ap_config_oom tnc_peap_soh
tnc_peap_soh_errors tnc_ttls tnc_ttls_fragmentation tnc_fast ap_ft_ptk_rekey
ap_acs_exclude_dfs autogo_many discovery_group_client discovery_listen_find
discovery_while_go p2p_go_move_reg_change p2ps_stale_group_removal2 grpform3_c
mesh_secure_ocv_mix_legacy mesh_secure_ocv_mix_ht
wpas_mesh_secure_sae_group_mismatch wpas_mesh_open_ht40 wpas_mesh_open_vht40
wpas_mesh_open_vht20 mesh_open_vht_160 wpas_mesh_gate_forwarding scan
scan_setband ap_vht160 ap_vht80_pwr_constraint proxyarp_open_ebtables
So the diff is (- == before HE patch, + == after HE patch):
ap_acs_exclude_dfs
+ap_ft_eap_vlan_multi
ap_ft_ptk_rekey
-ap_vht160
-ap_vht80_pwr_constraint
-autogo_many
-concurrent_grpform_while_connecting2
-discovery_group_client
-discovery_listen_find
-discovery_while_go
-fst_ap_config_oom
-fst_sta_remove_session_established
-grpform3_c
-mesh_open_vht_160
+ap_ft_vlan_disconnected
+ap_ht40_csa
+ap_ht40_csa3
+ap_ht_op_class_124
+discovery_while_go_p2p_dev
+dpp_test_vector_p_521
+fst_sta_tear_down_session_bad_fsts_id
+go_neg_forced_freq_diff_than_bss_freq
+ibss_5ghz
mesh_secure_ocv_mix_ht
mesh_secure_ocv_mix_legacy
+olbc_5ghz
p2p_go_move_reg_change
+p2ps_channel_active_go_and_station_different_mcc
+p2p_set_discoverability
p2ps_stale_group_removal2
proxyarp_open_ebtables
-scan
-scan_setband
+radius_acct_interim_unreachable
tnc_fast
tnc_peap_soh
tnc_peap_soh_errors
tnc_ttls
tnc_ttls_fragmentation
+wpas_ap_dfs
wpas_mesh_gate_forwarding
wpas_mesh_open_ht40
-wpas_mesh_open_vht20
-wpas_mesh_open_vht40
-wpas_mesh_secure_sae_group_mismatch
None of the "+" marked tests are reproducible (they test suite just randomly
fails as it looks like in the moment).
Hostapd version was 05822609d105 ("HE: MCS size is always a minimum of 4
bytes") with two pending patches [1,2]. Either John will resend the first
patch [1] or (when he is busy) I will do it in the next days.
Kind regards,
Sven
[1] https://patchwork.ozlabs.org/patch/1116968/
[2] https://patchwork.ozlabs.org/patch/1131273/