2023-01-08 15:14:36

by Bitterblue Smith

[permalink] [raw]
Subject: [PATCH v2 1/2] wifi: rtl8xxxu: Report the RSSI to the firmware

Or in the case of RTL8188EU, report the RSSI to the rate control code.

The rate control code for RTL8188EU is less likely to switch to a lower
rate when the RSSI is high. The firmware-based rate control in the other
chips probably works the same way.

This affects all the chips, but it was only tested with RTL8188EU,
RTL8188FU, and RTL8192EU.

Signed-off-by: Bitterblue Smith <[email protected]>
---
v2:
- Suggestion from Ping-Ke Shih:
- Make h2c_size 4 instead of 3 in rtl8xxxu_gen1_report_rssi().
Just to make it less confusing. It doesn't change the behaviour.
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 23 +++++++++++++
.../realtek/rtl8xxxu/rtl8xxxu_8188e.c | 6 ++++
.../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 1 +
.../realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 +
.../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 +
.../realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 +
.../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 +
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 34 +++++++++++++++++++
8 files changed, 68 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index be9479f969b7..90268479d3ad 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1168,6 +1168,26 @@ struct h2c_cmd {
u8 cmd;
u8 data;
} __packed bt_grant;
+ struct {
+ u8 cmd;
+ u8 macid;
+ u8 unknown0;
+ u8 rssi;
+ /*
+ * [0] - is_rx
+ * [1] - stbc_en
+ * [2] - noisy_decision
+ * [6] - bf_en
+ */
+ u8 data;
+ /*
+ * [0:6] - ra_th_offset
+ * [7] - ra_offset_direction
+ */
+ u8 ra_th_offset;
+ u8 unknown1;
+ u8 unknown2;
+ } __packed rssi_report;
};
};

@@ -1585,6 +1605,7 @@ struct rtl8xxxu_fileops {
u32 ramask, u8 rateid, int sgi, int txbw_40mhz);
void (*report_connect) (struct rtl8xxxu_priv *priv,
u8 macid, bool connect);
+ void (*report_rssi) (struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
struct ieee80211_tx_info *tx_info,
struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
@@ -1686,6 +1707,8 @@ void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
u8 macid, bool connect);
void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
u8 macid, bool connect);
+void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
+void rtl8xxxu_gen2_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv);
void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv);
void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv);
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
index 37658a090aee..08f3b93ad8d0 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
@@ -1784,6 +1784,11 @@ rtl8188e_update_rate_mask(struct rtl8xxxu_priv *priv,
rtl8188e_arfb_refresh(ra);
}

+static void rtl8188e_ra_set_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi)
+{
+ priv->ra_info.rssi_sta_ra = rssi;
+}
+
void rtl8188e_ra_info_init_all(struct rtl8xxxu_ra_info *ra)
{
ra->decision_rate = DESC_RATE_MCS7;
@@ -1842,6 +1847,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops = {
.set_tx_power = rtl8188f_set_tx_power,
.update_rate_mask = rtl8188e_update_rate_mask,
.report_connect = rtl8xxxu_gen2_report_connect,
+ .report_rssi = rtl8188e_ra_set_rssi,
.fill_txdesc = rtl8xxxu_fill_txdesc_v3,
.set_crystal_cap = rtl8188f_set_crystal_cap,
.cck_rssi = rtl8188e_cck_rssi,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c
index f5a0c7a8a581..af6e2c8a5025 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c
@@ -1732,6 +1732,7 @@ struct rtl8xxxu_fileops rtl8188fu_fops = {
.set_tx_power = rtl8188f_set_tx_power,
.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
.report_connect = rtl8xxxu_gen2_report_connect,
+ .report_rssi = rtl8xxxu_gen2_report_rssi,
.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
.set_crystal_cap = rtl8188f_set_crystal_cap,
.cck_rssi = rtl8188f_cck_rssi,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
index 8981a86c833f..e61d65c3579b 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
@@ -609,6 +609,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops = {
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
.update_rate_mask = rtl8xxxu_update_rate_mask,
.report_connect = rtl8xxxu_gen1_report_connect,
+ .report_rssi = rtl8xxxu_gen1_report_rssi,
.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
.cck_rssi = rtl8723a_cck_rssi,
.writeN_block_size = 128,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
index ca1688600947..4a1c9bcafe31 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -1784,6 +1784,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops = {
.set_tx_power = rtl8192e_set_tx_power,
.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
.report_connect = rtl8xxxu_gen2_report_connect,
+ .report_rssi = rtl8xxxu_gen2_report_rssi,
.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
.set_crystal_cap = rtl8723a_set_crystal_cap,
.cck_rssi = rtl8192e_cck_rssi,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
index e881ee33c6e8..5ed523db2d87 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
@@ -478,6 +478,7 @@ struct rtl8xxxu_fileops rtl8723au_fops = {
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
.update_rate_mask = rtl8xxxu_update_rate_mask,
.report_connect = rtl8xxxu_gen1_report_connect,
+ .report_rssi = rtl8xxxu_gen1_report_rssi,
.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
.set_crystal_cap = rtl8723a_set_crystal_cap,
.cck_rssi = rtl8723a_cck_rssi,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
index 0ed667d5ed25..21613d60dc22 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
@@ -1727,6 +1727,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops = {
.set_tx_power = rtl8723b_set_tx_power,
.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
.report_connect = rtl8xxxu_gen2_report_connect,
+ .report_rssi = rtl8xxxu_gen2_report_rssi,
.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
.set_crystal_cap = rtl8723a_set_crystal_cap,
.cck_rssi = rtl8723b_cck_rssi,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index fd97c040948a..4c76fad67150 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4461,6 +4461,37 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt));
}

+void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi)
+{
+ struct h2c_cmd h2c;
+ const int h2c_size = 4;
+
+ memset(&h2c, 0, sizeof(struct h2c_cmd));
+
+ h2c.rssi_report.cmd = H2C_SET_RSSI;
+ h2c.rssi_report.macid = macid;
+ h2c.rssi_report.rssi = rssi;
+
+ rtl8xxxu_gen1_h2c_cmd(priv, &h2c, h2c_size);
+}
+
+void rtl8xxxu_gen2_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi)
+{
+ struct h2c_cmd h2c;
+ int h2c_size = sizeof(h2c.rssi_report);
+
+ if (priv->rtl_chip == RTL8723B)
+ h2c_size = 4;
+
+ memset(&h2c, 0, sizeof(struct h2c_cmd));
+
+ h2c.rssi_report.cmd = H2C_8723B_RSSI_SETTING;
+ h2c.rssi_report.macid = macid;
+ h2c.rssi_report.rssi = rssi;
+
+ rtl8xxxu_gen2_h2c_cmd(priv, &h2c, h2c_size);
+}
+
void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
{
u8 agg_ctrl, usb_spec, page_thresh, timeout;
@@ -6701,6 +6732,9 @@ static void rtl8xxxu_watchdog_callback(struct work_struct *work)

signal = ieee80211_ave_rssi(vif);

+ priv->fops->report_rssi(priv, 0,
+ rtl8xxxu_signal_to_snr(signal));
+
if (priv->fops->set_crystal_cap)
rtl8xxxu_track_cfo(priv);

--
2.38.0


2023-01-09 01:37:33

by Ping-Ke Shih

[permalink] [raw]
Subject: RE: [PATCH v2 1/2] wifi: rtl8xxxu: Report the RSSI to the firmware



> -----Original Message-----
> From: Bitterblue Smith <[email protected]>
> Sent: Sunday, January 8, 2023 11:07 PM
> To: [email protected]
> Cc: Jes Sorensen <[email protected]>; Ping-Ke Shih <[email protected]>
> Subject: [PATCH v2 1/2] wifi: rtl8xxxu: Report the RSSI to the firmware
>
> Or in the case of RTL8188EU, report the RSSI to the rate control code.
>
> The rate control code for RTL8188EU is less likely to switch to a lower
> rate when the RSSI is high. The firmware-based rate control in the other
> chips probably works the same way.
>
> This affects all the chips, but it was only tested with RTL8188EU,
> RTL8188FU, and RTL8192EU.
>
> Signed-off-by: Bitterblue Smith <[email protected]>

Reviewed-by: Ping-Ke Shih <[email protected]>

> ---
> v2:
> - Suggestion from Ping-Ke Shih:
> - Make h2c_size 4 instead of 3 in rtl8xxxu_gen1_report_rssi().
> Just to make it less confusing. It doesn't change the behaviour.
> ---
> .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 23 +++++++++++++
> .../realtek/rtl8xxxu/rtl8xxxu_8188e.c | 6 ++++
> .../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 1 +
> .../realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 +
> .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 +
> .../realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 +
> .../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 +
> .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 34 +++++++++++++++++++
> 8 files changed, 68 insertions(+)
>

[...]

2023-01-16 16:39:23

by Kalle Valo

[permalink] [raw]
Subject: Re: [PATCH v2 1/2] wifi: rtl8xxxu: Report the RSSI to the firmware

Bitterblue Smith <[email protected]> wrote:

> Or in the case of RTL8188EU, report the RSSI to the rate control code.
>
> The rate control code for RTL8188EU is less likely to switch to a lower
> rate when the RSSI is high. The firmware-based rate control in the other
> chips probably works the same way.
>
> This affects all the chips, but it was only tested with RTL8188EU,
> RTL8188FU, and RTL8192EU.
>
> Signed-off-by: Bitterblue Smith <[email protected]>
> Reviewed-by: Ping-Ke Shih <[email protected]>

2 patches applied to wireless-next.git, thanks.

3922dc9fbdb8 wifi: rtl8xxxu: Report the RSSI to the firmware
2a86aa9a1892 wifi: rtl8xxxu: Use a longer retry limit of 48

--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches