As the association status changes the driver needs to configure the
hardware. This is done based on information in the "sta" acquired by
ieee80211_find_sta(), which requires the caller to ensure that the "sta"
is valid while its being used; generally by entering an rcu read
section.
But the operations acting on the "sta" has to communicate with the
firmware and may therefor sleep, resulting in the following report:
[ 31.418190] BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:238
[ 31.425919] in_atomic(): 0, irqs_disabled(): 0, pid: 34, name:
kworker/u8:1
[ 31.434609] CPU: 0 PID: 34 Comm: kworker/u8:1 Tainted: G W
4.12.0-rc4-next-20170607+ #993
[ 31.441002] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC
(DT)
[ 31.450380] Workqueue: phy0 ieee80211_iface_work
[ 31.457226] Call trace:
[ 31.461830] [<ffffff8008088c58>] dump_backtrace+0x0/0x260
[ 31.464004] [<ffffff8008088f7c>] show_stack+0x14/0x20
[ 31.469557] [<ffffff8008392e70>] dump_stack+0x98/0xb8
[ 31.474592] [<ffffff80080e4330>] ___might_sleep+0xf0/0x118
[ 31.479626] [<ffffff80080e43a8>] __might_sleep+0x50/0x88
[ 31.485010] [<ffffff80088ff9a4>] mutex_lock+0x24/0x60
[ 31.490479] [<ffffff8008595c38>] wcn36xx_smd_set_link_st+0x30/0x130
[ 31.495428] [<ffffff8008591ed8>] wcn36xx_bss_info_changed+0x148/0x448
[ 31.501504] [<ffffff80088ab3c4>]
ieee80211_bss_info_change_notify+0xbc/0x118
[ 31.508102] [<ffffff80088f841c>] ieee80211_assoc_success+0x664/0x7f8
[ 31.515220] [<ffffff80088e13d4>]
ieee80211_rx_mgmt_assoc_resp+0x144/0x2d8
[ 31.521555] [<ffffff80088e1e20>]
ieee80211_sta_rx_queued_mgmt+0x190/0x698
[ 31.528239] [<ffffff80088bc44c>] ieee80211_iface_work+0x234/0x368
[ 31.535011] [<ffffff80080d81ac>] process_one_work+0x1cc/0x340
[ 31.541086] [<ffffff80080d8368>] worker_thread+0x48/0x430
[ 31.546814] [<ffffff80080de448>] kthread+0x108/0x138
[ 31.552195] [<ffffff8008082ec0>] ret_from_fork+0x10/0x50
In order to ensure that the "sta" remains alive (and consistent) for the
duration of bss_info_changed() mutual exclusion has to be ensured with
sta_remove().
This is done by introducing a mutex to cover firmware configuration
changes, which is made to also ensure mutual exclusion between other
operations changing the state or configuration of the firmware. With
this we can drop the rcu read lock.
Cc: [email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/main.c | 52 ++++++++++++++++++++++++++++--
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 3 ++
2 files changed, 53 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index d5e993dc9b23..6b6fa8e01f0e 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -372,6 +372,8 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac config changed 0x%08x\n", changed);
+ mutex_lock(&wcn->conf_mutex);
+
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
int ch = WCN36XX_HW_CHANNEL(wcn);
wcn36xx_dbg(WCN36XX_DBG_MAC, "wcn36xx_config channel switch=%d\n",
@@ -382,6 +384,8 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
}
}
+ mutex_unlock(&wcn->conf_mutex);
+
return 0;
}
@@ -396,6 +400,8 @@ static void wcn36xx_configure_filter(struct ieee80211_hw *hw,
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac configure filter\n");
+ mutex_lock(&wcn->conf_mutex);
+
*total &= FIF_ALLMULTI;
fp = (void *)(unsigned long)multicast;
@@ -408,6 +414,8 @@ static void wcn36xx_configure_filter(struct ieee80211_hw *hw,
else if (NL80211_IFTYPE_STATION == vif->type && tmp->sta_assoc)
wcn36xx_smd_set_mc_list(wcn, vif, fp);
}
+
+ mutex_unlock(&wcn->conf_mutex);
kfree(fp);
}
@@ -471,6 +479,8 @@ static int wcn36xx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
key_conf->key,
key_conf->keylen);
+ mutex_lock(&wcn->conf_mutex);
+
switch (key_conf->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
vif_priv->encrypt_type = WCN36XX_HAL_ED_WEP40;
@@ -565,6 +575,8 @@ static int wcn36xx_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
}
out:
+ mutex_unlock(&wcn->conf_mutex);
+
return ret;
}
@@ -725,6 +737,8 @@ static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac bss info changed vif %p changed 0x%08x\n",
vif, changed);
+ mutex_lock(&wcn->conf_mutex);
+
if (changed & BSS_CHANGED_BEACON_INFO) {
wcn36xx_dbg(WCN36XX_DBG_MAC,
"mac bss changed dtim period %d\n",
@@ -787,7 +801,13 @@ static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
bss_conf->aid);
vif_priv->sta_assoc = true;
- rcu_read_lock();
+
+ /*
+ * Holding conf_mutex ensures mutal exclusion with
+ * wcn36xx_sta_remove() and as such ensures that sta
+ * won't be freed while we're operating on it. As such
+ * we do not need to hold the rcu_read_lock().
+ */
sta = ieee80211_find_sta(vif, bss_conf->bssid);
if (!sta) {
wcn36xx_err("sta %pM is not found\n",
@@ -811,7 +831,6 @@ static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
* place where AID is available.
*/
wcn36xx_smd_config_sta(wcn, vif, sta);
- rcu_read_unlock();
} else {
wcn36xx_dbg(WCN36XX_DBG_MAC,
"disassociated bss %pM vif %pM AID=%d\n",
@@ -873,6 +892,9 @@ static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
}
}
out:
+
+ mutex_unlock(&wcn->conf_mutex);
+
return;
}
@@ -882,7 +904,10 @@ static int wcn36xx_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
struct wcn36xx *wcn = hw->priv;
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac set RTS threshold %d\n", value);
+ mutex_lock(&wcn->conf_mutex);
wcn36xx_smd_update_cfg(wcn, WCN36XX_HAL_CFG_RTS_THRESHOLD, value);
+ mutex_unlock(&wcn->conf_mutex);
+
return 0;
}
@@ -893,8 +918,12 @@ static void wcn36xx_remove_interface(struct ieee80211_hw *hw,
struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac remove interface vif %p\n", vif);
+ mutex_lock(&wcn->conf_mutex);
+
list_del(&vif_priv->list);
wcn36xx_smd_delete_sta_self(wcn, vif->addr);
+
+ mutex_unlock(&wcn->conf_mutex);
}
static int wcn36xx_add_interface(struct ieee80211_hw *hw,
@@ -915,9 +944,13 @@ static int wcn36xx_add_interface(struct ieee80211_hw *hw,
return -EOPNOTSUPP;
}
+ mutex_lock(&wcn->conf_mutex);
+
list_add(&vif_priv->list, &wcn->vif_list);
wcn36xx_smd_add_sta_self(wcn, vif);
+ mutex_unlock(&wcn->conf_mutex);
+
return 0;
}
@@ -930,6 +963,8 @@ static int wcn36xx_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac sta add vif %p sta %pM\n",
vif, sta->addr);
+ mutex_lock(&wcn->conf_mutex);
+
spin_lock_init(&sta_priv->ampdu_lock);
sta_priv->vif = vif_priv;
/*
@@ -941,6 +976,9 @@ static int wcn36xx_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
sta_priv->aid = sta->aid;
wcn36xx_smd_config_sta(wcn, vif, sta);
}
+
+ mutex_unlock(&wcn->conf_mutex);
+
return 0;
}
@@ -954,8 +992,13 @@ static int wcn36xx_sta_remove(struct ieee80211_hw *hw,
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac sta remove vif %p sta %pM index %d\n",
vif, sta->addr, sta_priv->sta_index);
+ mutex_lock(&wcn->conf_mutex);
+
wcn36xx_smd_delete_sta(wcn, sta_priv->sta_index);
sta_priv->vif = NULL;
+
+ mutex_unlock(&wcn->conf_mutex);
+
return 0;
}
@@ -999,6 +1042,8 @@ static int wcn36xx_ampdu_action(struct ieee80211_hw *hw,
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac ampdu action action %d tid %d\n",
action, tid);
+ mutex_lock(&wcn->conf_mutex);
+
switch (action) {
case IEEE80211_AMPDU_RX_START:
sta_priv->tid = tid;
@@ -1038,6 +1083,8 @@ static int wcn36xx_ampdu_action(struct ieee80211_hw *hw,
wcn36xx_err("Unknown AMPDU action\n");
}
+ mutex_unlock(&wcn->conf_mutex);
+
return 0;
}
@@ -1216,6 +1263,7 @@ static int wcn36xx_probe(struct platform_device *pdev)
wcn = hw->priv;
wcn->hw = hw;
wcn->dev = &pdev->dev;
+ mutex_init(&wcn->conf_mutex);
mutex_init(&wcn->hal_mutex);
mutex_init(&wcn->scan_lock);
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index b52b4da9a967..6aefba4c0cda 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -202,6 +202,9 @@ struct wcn36xx {
struct qcom_smem_state *tx_rings_empty_state;
unsigned tx_rings_empty_state_bit;
+ /* prevents concurrent FW reconfiguration */
+ struct mutex conf_mutex;
+
/*
* smd_buf must be protected with smd_mutex to garantee
* that all messages are sent one after another
--
2.12.0
Bjorn Andersson <[email protected]> wrote:
> As the association status changes the driver needs to configure the
> hardware. This is done based on information in the "sta" acquired by
> ieee80211_find_sta(), which requires the caller to ensure that the "sta"
> is valid while its being used; generally by entering an rcu read
> section.
>
> But the operations acting on the "sta" has to communicate with the
> firmware and may therefor sleep, resulting in the following report:
>
> [ 31.418190] BUG: sleeping function called from invalid context at
> kernel/locking/mutex.c:238
> [ 31.425919] in_atomic(): 0, irqs_disabled(): 0, pid: 34, name:
> kworker/u8:1
> [ 31.434609] CPU: 0 PID: 34 Comm: kworker/u8:1 Tainted: G W
> 4.12.0-rc4-next-20170607+ #993
> [ 31.441002] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC
> (DT)
> [ 31.450380] Workqueue: phy0 ieee80211_iface_work
> [ 31.457226] Call trace:
> [ 31.461830] [<ffffff8008088c58>] dump_backtrace+0x0/0x260
> [ 31.464004] [<ffffff8008088f7c>] show_stack+0x14/0x20
> [ 31.469557] [<ffffff8008392e70>] dump_stack+0x98/0xb8
> [ 31.474592] [<ffffff80080e4330>] ___might_sleep+0xf0/0x118
> [ 31.479626] [<ffffff80080e43a8>] __might_sleep+0x50/0x88
> [ 31.485010] [<ffffff80088ff9a4>] mutex_lock+0x24/0x60
> [ 31.490479] [<ffffff8008595c38>] wcn36xx_smd_set_link_st+0x30/0x130
> [ 31.495428] [<ffffff8008591ed8>] wcn36xx_bss_info_changed+0x148/0x448
> [ 31.501504] [<ffffff80088ab3c4>]
> ieee80211_bss_info_change_notify+0xbc/0x118
> [ 31.508102] [<ffffff80088f841c>] ieee80211_assoc_success+0x664/0x7f8
> [ 31.515220] [<ffffff80088e13d4>]
> ieee80211_rx_mgmt_assoc_resp+0x144/0x2d8
> [ 31.521555] [<ffffff80088e1e20>]
> ieee80211_sta_rx_queued_mgmt+0x190/0x698
> [ 31.528239] [<ffffff80088bc44c>] ieee80211_iface_work+0x234/0x368
> [ 31.535011] [<ffffff80080d81ac>] process_one_work+0x1cc/0x340
> [ 31.541086] [<ffffff80080d8368>] worker_thread+0x48/0x430
> [ 31.546814] [<ffffff80080de448>] kthread+0x108/0x138
> [ 31.552195] [<ffffff8008082ec0>] ret_from_fork+0x10/0x50
>
> In order to ensure that the "sta" remains alive (and consistent) for the
> duration of bss_info_changed() mutual exclusion has to be ensured with
> sta_remove().
>
> This is done by introducing a mutex to cover firmware configuration
> changes, which is made to also ensure mutual exclusion between other
> operations changing the state or configuration of the firmware. With
> this we can drop the rcu read lock.
>
> Cc: [email protected]
> Signed-off-by: Bjorn Andersson <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
39efc7cc7ccf wcn36xx: Introduce mutual exclusion of fw configuration
--
https://patchwork.kernel.org/patch/9877987/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches