Hi all
I have a question about the support of RTL8188EUS chipset (which I
have in a TpLink 0bda:8179 usb dongle)
This dongle works with the wext staging driver r8188eu driver. Is it
meant to be supported in the rtl2xxx driver?
Bye
On 11/5/18 5:37 AM, Menion wrote:
> Hi all
> I have a question about the support of RTL8188EUS chipset (which I
> have in a TpLink 0bda:8179 usb dongle)
> This dongle works with the wext staging driver r8188eu driver. Is it
> meant to be supported in the rtl2xxx driver?
Assuming that you mean rtl8xxxu, the answer is no. I have no idea what rtl2xxx is.
If you want a cfg80211/nl80211 driver rather than the wext-based one, I am
currently cleaning up a new driver from Realtek with the possibility of
replacing the one now in staging with a new version. It can be obtained with the
following command:
git clone https://github.com/lwfinger/rtl8188eu.git -b v5.2.2.4
This driver will definitely handle your device and has pretty good performance.
Using a local speedtest.net-type web server, I get up to 50 Mbps down and 45
Mbps up.
The driver is undergoing fairly rapid change, but mostly to remove lots of dead
code, thus you will not need to pull that often. It will build on any kernel
from 4.20 back to at least 2.6.13. I am only testing on 4.20-rc1.
Larry
Hi
Yes sorry I was referring to rtl8xxxu driver, I don't really know how
it could come up as rtl2xxxx :)
I have compiled it for my Openwrt x86_64 image, that run kernel
4.14.72, I just needed to tweak the Makefile in order to pick the
command line KSRC instead of the platform detected one
Anyhow the compilation command seems ok:
menion@Menionubuntu:/media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/rtl8188eu$
KSRC=/media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/linux-4.14.72/
CROSS_COMPILE=/media/storage/das1/temp/openwrt_x86/staging_dir/toolchain-x86_64_gcc-7.3.0_musl/bin/x86_64-openwrt-linux-
make
make ARCH=x86_64
CROSS_COMPILE=/media/storage/das1/temp/openwrt_x86/staging_dir/toolchain-x86_64_gcc-7.3.0_musl/bin/x86_64-openwrt-linux-
-C /media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/linux-4.14.72/
M=/media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/rtl8188eu
modules
make[1]: Entering directory
'/media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/linux-4.14.72'
CC [M] /media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/rtl8188eu/core/rtw_cmd.o
the compilation goes fine but in the end it complains, with warning
for missing symbols, but I think it is normal:
WARNING: "cfg80211_remain_on_channel_expired"
[/media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/rtl8188eu/8188eu.ko]
undefined!
WARNING: "cfg80211_scan_done"
[/media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/rtl8188eu/8188eu.ko]
undefined!
WARNING: "cfg80211_inform_bss_frame_data"
[/media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/rtl8188eu/8188eu.ko]
undefined!
CC /media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/rtl8188eu/8188eu.mod.o
LD [M] /media/storage/das1/temp/openwrt_x86/build_dir/target-x86_64_musl/linux-x86_64/rtl8188eu/8188eu.ko
I load it on my openwrt (running in virtualbox) but when I attach the
dongle I get an error (if I understand correctly the issue is with
FALSE return from : rtw_regsty_chk_target_tx_power_valid)
What can be the problem?
Thanks by
--dmesg--
[ 87.596336] RTW: rtl8188eu v5.2.2.4_25483.20171222
[ 87.597085] RTW: build time: Nov 6 2018 12:13:11
[ 87.659036] RTW: hal_com_config_channel_plan chplan:0x20
[ 87.659860] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE
for band:0, path:0, rs:0, t:-1
[ 87.660956] ------------[ cut here ]------------
[ 87.661544] WARNING: CPU: 0 PID: 1923 at wiphy_register+0x25e/0x850
[cfg80211]
[ 87.662601] Modules linked in: 8188eu(+) ath9k_htc ath9k_common
rtl8821ae rtl8192se rtl8192de rtl8192cu rtl8192ce rtl8192c_common
rtl_usb rtl_pci rt2800usb rt2800pci rt2800mmio rt2800lib rt2500usb
rt2500pci rt2400pci pppoe ppp_async btcoexist ath9k_hw ath rtlwifi
rtl8xxxu rtl818x_pci rtl8187 rt2x00usb rt2x00pci rt2x00mmio rt2x00lib
rndis_host pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat
ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp
xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack
xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD usbnet slhc
r8712u r8169 nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4
nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw
nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache
nf_conntrack
[ 87.669478] lib80211_crypt_wep lib80211_crypt_tkip
lib80211_crypt_ccmp lib80211 iptable_mangle iptable_filter ip_tables
e1000e crc_itu_t crc_ccitt compat i2c_dev ip6t_REJECT nf_reject_ipv6
nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables
x_tables igb i2c_algo_bit e1000 tun vfat fat ntfs nls_utf8
nls_iso8859_1 nls_cp437 eeprom_93cx6 xhci_plat_hcd ehci_platform xfs
libcrc32c button_hotplug ptp pps_core mii [last unloaded: 8188eu]
[ 87.672991] CPU: 0 PID: 1923 Comm: modprobe Tainted: G W
4.14.72 #0
[ 87.673852] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 87.674777] task: ffff880006427300 task.stack: ffffc900004f8000
[ 87.675462] RIP: 0010:wiphy_register+0x25e/0x850 [cfg80211]
[ 87.676097] RSP: 0018:ffffc900004fb9a0 EFLAGS: 00010246
[ 87.676751] RAX: 0000000000000000 RBX: ffff880006bc8300 RCX: ffffffffa084ae80
[ 87.677616] RDX: 0000000000000000 RSI: ffffffff81c7aee0 RDI: ffff880006bc8300
[ 87.678599] RBP: ffffc900004fba10 R08: 0000000000000000 R09: ffffc90000081869
[ 87.679407] R10: ffffc900004fba28 R11: 0000000000000001 R12: ffffc90000080698
[ 87.680137] R13: ffff880006bcc000 R14: 0000000000000000 R15: ffffffffa082a355
[ 87.681248] FS: 00007ff17b05bb88(0000) GS:ffff880007c00000(0000)
knlGS:0000000000000000
[ 87.682163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 87.682915] CR2: 00007fe4162ceb40 CR3: 00000000067e2001 CR4: 00000000000606f0
[ 87.683778] Call Trace:
[ 87.684333] ? complete_all+0x3d/0x50
[ 87.684830] ? __kmalloc+0x3d/0xf0
[ 87.685383] rtw_wiphy_register+0x47/0x4a [8188eu]
[ 87.685970] ? rtw_wiphy_register+0x47/0x4a [8188eu]
[ 87.686603] rtw_cfg80211_ndev_res_register+0x14/0x54 [8188eu]
[ 87.687299] rtw_init_netdev_name+0x18d/0x1bd [8188eu]
[ 87.687907] rtw_os_ndevs_init+0x140/0x1c6 [8188eu]
[ 87.688917] rtw_set_hal_ops+0x74d/0x840 [8188eu]
[ 87.690530] usb_probe_interface+0x188/0x220
[ 87.691299] driver_probe_device+0x133/0x2c0
[ 87.692219] __driver_attach+0x6f/0xa0
[ 87.692774] ? driver_probe_device+0x2c0/0x2c0
[ 87.693537] bus_for_each_dev+0x52/0x90
[ 87.694160] driver_attach+0x19/0x20
[ 87.694672] bus_add_driver+0xf0/0x1f0
[ 87.695215] driver_register+0x83/0xc0
[ 87.695729] usb_register_driver+0x7a/0x130
[ 87.696296] ? 0xffffffffa0889000
[ 87.696799] init_module+0x57/0x1000 [8188eu]
[ 87.697473] do_one_initcall+0x9a/0x170
[ 87.698026] ? __vunmap+0x88/0xb0
[ 87.698497] ? vfree+0x60/0x70
[ 87.698950] do_init_module+0x55/0x1d4
[ 87.699499] load_module+0x1b8d/0x2250
[ 87.700075] SyS_init_module+0x107/0x120
[ 87.700689] ? SyS_init_module+0x107/0x120
[ 87.701406] do_syscall_64+0x115/0x1b0
[ 87.701908] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 87.702536] RIP: 0033:0x7ff17ae21fd8
[ 87.703062] RSP: 002b:00007ffc50736b90 EFLAGS: 00000212 ORIG_RAX:
00000000000000af
[ 87.703928] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff17ae21fd8
[ 87.704676] RDX: 0000000000402b2f RSI: 0000000000274190 RDI: 00007ff17a75c020
[ 87.705442] RBP: 00000000006040a0 R08: 0000000000000000 R09: 0000000000000802
[ 87.706173] R10: 0000000000000000 R11: 0000000000000212 R12: 00007ff17a75c020
[ 87.706982] R13: 0000000000000003 R14: 0000000000402b2f R15: 0000000000274190
[ 87.707759] Code: 00 0f 84 2d 05 00 00 0f 0b bb ea ff ff ff e9 ee
05 00 00 8b 0a 89 8f 00 08 00 00 0f b7 52 04 66 89 97 04 08 00 00 66
85 c0 75 04 <0f> 0b eb 15 89 c2 66 81 e2 fe 1f 66 39 d0 74 09 0f 0b 66
89 97
[ 87.710174] ---[ end trace 312f56694fd4fe2f ]---
[ 87.710850] ------------[ cut here ]------------
[ 87.711469] WARNING: CPU: 0 PID: 1923 at wiphy_register+0x4fe/0x850
[cfg80211]
[ 87.712363] Modules linked in: 8188eu(+) ath9k_htc ath9k_common
rtl8821ae rtl8192se rtl8192de rtl8192cu rtl8192ce rtl8192c_common
rtl_usb rtl_pci rt2800usb rt2800pci rt2800mmio rt2800lib rt2500usb
rt2500pci rt2400pci pppoe ppp_async btcoexist ath9k_hw ath rtlwifi
rtl8xxxu rtl818x_pci rtl8187 rt2x00usb rt2x00pci rt2x00mmio rt2x00lib
rndis_host pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat
ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp
xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack
xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD usbnet slhc
r8712u r8169 nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4
nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw
nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache
nf_conntrack
[ 87.718993] lib80211_crypt_wep lib80211_crypt_tkip
lib80211_crypt_ccmp lib80211 iptable_mangle iptable_filter ip_tables
e1000e crc_itu_t crc_ccitt compat i2c_dev ip6t_REJECT nf_reject_ipv6
nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables
x_tables igb i2c_algo_bit e1000 tun vfat fat ntfs nls_utf8
nls_iso8859_1 nls_cp437 eeprom_93cx6 xhci_plat_hcd ehci_platform xfs
libcrc32c button_hotplug ptp pps_core mii [last unloaded: 8188eu]
[ 87.722683] CPU: 0 PID: 1923 Comm: modprobe Tainted: G W
4.14.72 #0
[ 87.723629] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 87.724508] task: ffff880006427300 task.stack: ffffc900004f8000
[ 87.725158] RIP: 0010:wiphy_register+0x4fe/0x850 [cfg80211]
[ 87.725846] RSP: 0018:ffffc900004fb9a0 EFLAGS: 00010246
[ 87.726547] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffa084ae80
[ 87.727284] RDX: 0000000000000000 RSI: ffffffff81c7aee0 RDI: ffff880006bc8300
[ 87.728063] RBP: ffffc900004fba10 R08: 0000000000000000 R09: 0000000000000003
[ 87.728804] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
[ 87.729569] R13: ffff880006bcc000 R14: 0000000000000000 R15: ffffffffa082a355
[ 87.730296] FS: 00007ff17b05bb88(0000) GS:ffff880007c00000(0000)
knlGS:0000000000000000
[ 87.731288] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 87.732311] CR2: 00007fe4162ceb40 CR3: 00000000067e2001 CR4: 00000000000606f0
[ 87.733126] Call Trace:
[ 87.733655] ? complete_all+0x3d/0x50
[ 87.734490] ? __kmalloc+0x3d/0xf0
[ 87.735026] rtw_wiphy_register+0x47/0x4a [8188eu]
[ 87.735667] ? rtw_wiphy_register+0x47/0x4a [8188eu]
[ 87.736303] rtw_cfg80211_ndev_res_register+0x14/0x54 [8188eu]
[ 87.736994] rtw_init_netdev_name+0x18d/0x1bd [8188eu]
[ 87.737651] rtw_os_ndevs_init+0x140/0x1c6 [8188eu]
[ 87.738247] rtw_set_hal_ops+0x74d/0x840 [8188eu]
[ 87.739003] usb_probe_interface+0x188/0x220
[ 87.739567] driver_probe_device+0x133/0x2c0
[ 87.740103] __driver_attach+0x6f/0xa0
[ 87.740652] ? driver_probe_device+0x2c0/0x2c0
[ 87.741242] bus_for_each_dev+0x52/0x90
[ 87.741768] driver_attach+0x19/0x20
[ 87.742301] bus_add_driver+0xf0/0x1f0
[ 87.742869] driver_register+0x83/0xc0
[ 87.743424] usb_register_driver+0x7a/0x130
[ 87.743951] ? 0xffffffffa0889000
[ 87.744490] init_module+0x57/0x1000 [8188eu]
[ 87.745033] do_one_initcall+0x9a/0x170
[ 87.745555] ? __vunmap+0x88/0xb0
[ 87.746025] ? vfree+0x60/0x70
[ 87.746531] do_init_module+0x55/0x1d4
[ 87.747030] load_module+0x1b8d/0x2250
[ 87.748582] SyS_init_module+0x107/0x120
[ 87.749105] ? SyS_init_module+0x107/0x120
[ 87.749630] do_syscall_64+0x115/0x1b0
[ 87.750201] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 87.750960] RIP: 0033:0x7ff17ae21fd8
[ 87.751479] RSP: 002b:00007ffc50736b90 EFLAGS: 00000212 ORIG_RAX:
00000000000000af
[ 87.752378] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff17ae21fd8
[ 87.753486] RDX: 0000000000402b2f RSI: 0000000000274190 RDI: 00007ff17a75c020
[ 87.754277] RBP: 00000000006040a0 R08: 0000000000000000 R09: 0000000000000802
[ 87.755055] R10: 0000000000000000 R11: 0000000000000212 R12: 00007ff17a75c020
[ 87.755783] R13: 0000000000000003 R14: 0000000000402b2f R15: 0000000000274190
[ 87.756745] Code: 0f 0b bb ea ff ff ff e9 55 03 00 00 41 09 c8 4c
39 d2 75 b5 ba 01 00 00 00 49 83 c1 01 49 83 f9 03 0f 85 e5 fe ff ff
84 d2 75 0c <0f> 0b bb ea ff ff ff e9 2a 03 00 00 48 8b 87 a8 08 00 00
48 85
[ 87.758561] ---[ end trace 312f56694fd4fe30 ]---
[ 87.759195] ------------[ cut here ]------------
[ 87.759868] WARNING: CPU: 0 PID: 1923 at
rtw_init_netdev_name+0x9d/0x1bd [8188eu]
[ 87.760777] Modules linked in: 8188eu(+) ath9k_htc ath9k_common
rtl8821ae rtl8192se rtl8192de rtl8192cu rtl8192ce rtl8192c_common
rtl_usb rtl_pci rt2800usb rt2800pci rt2800mmio rt2800lib rt2500usb
rt2500pci rt2400pci pppoe ppp_async btcoexist ath9k_hw ath rtlwifi
rtl8xxxu rtl818x_pci rtl8187 rt2x00usb rt2x00pci rt2x00mmio rt2x00lib
rndis_host pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat
ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp
xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack
xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD usbnet slhc
r8712u r8169 nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4
nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw
nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache
nf_conntrack
[ 87.767060] lib80211_crypt_wep lib80211_crypt_tkip
lib80211_crypt_ccmp lib80211 iptable_mangle iptable_filter ip_tables
e1000e crc_itu_t crc_ccitt compat i2c_dev ip6t_REJECT nf_reject_ipv6
nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables
x_tables igb i2c_algo_bit e1000 tun vfat fat ntfs nls_utf8
nls_iso8859_1 nls_cp437 eeprom_93cx6 xhci_plat_hcd ehci_platform xfs
libcrc32c button_hotplug ptp pps_core mii [last unloaded: 8188eu]
[ 87.770726] CPU: 0 PID: 1923 Comm: modprobe Tainted: G W
4.14.72 #0
[ 87.771595] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 87.772892] task: ffff880006427300 task.stack: ffffc900004f8000
[ 87.773635] RIP: 0010:rtw_init_netdev_name+0x9d/0x1bd [8188eu]
[ 87.774276] RSP: 0018:ffffc900004fba58 EFLAGS: 00010297
[ 87.775233] RAX: 0000000000000000 RBX: ffffc9000007d000 RCX: ffffffffa084ae80
[ 87.776021] RDX: 0000000000000000 RSI: ffffffff81c7aee0 RDI: ffff880006bc8300
[ 87.776780] RBP: ffffc900004fba88 R08: 0000000000000000 R09: 0000000000000003
[ 87.777512] R10: ffffc900004fba28 R11: 0000000000000000 R12: ffffc90000080698
[ 87.778236] R13: ffff880006bcc000 R14: 0000000000000000 R15: ffffffffa082a355
[ 87.779013] FS: 00007ff17b05bb88(0000) GS:ffff880007c00000(0000)
knlGS:0000000000000000
[ 87.779926] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 87.780667] CR2: 00007fe4162ceb40 CR3: 00000000067e2001 CR4: 00000000000606f0
[ 87.781721] Call Trace:
[ 87.782163] rtw_os_ndevs_init+0x140/0x1c6 [8188eu]
[ 87.782806] rtw_set_hal_ops+0x74d/0x840 [8188eu]
[ 87.783560] usb_probe_interface+0x188/0x220
[ 87.784599] driver_probe_device+0x133/0x2c0
[ 87.785347] __driver_attach+0x6f/0xa0
[ 87.785894] ? driver_probe_device+0x2c0/0x2c0
[ 87.786485] bus_for_each_dev+0x52/0x90
[ 87.786986] driver_attach+0x19/0x20
[ 87.787644] bus_add_driver+0xf0/0x1f0
[ 87.788243] driver_register+0x83/0xc0
[ 87.788772] usb_register_driver+0x7a/0x130
[ 87.789331] ? 0xffffffffa0889000
[ 87.789827] init_module+0x57/0x1000 [8188eu]
[ 87.790411] do_one_initcall+0x9a/0x170
[ 87.790913] ? __vunmap+0x88/0xb0
[ 87.791432] ? vfree+0x60/0x70
[ 87.791881] do_init_module+0x55/0x1d4
[ 87.792424] load_module+0x1b8d/0x2250
[ 87.792965] SyS_init_module+0x107/0x120
[ 87.793532] ? SyS_init_module+0x107/0x120
[ 87.794052] do_syscall_64+0x115/0x1b0
[ 87.794595] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 87.795223] RIP: 0033:0x7ff17ae21fd8
[ 87.795752] RSP: 002b:00007ffc50736b90 EFLAGS: 00000212 ORIG_RAX:
00000000000000af
[ 87.796971] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff17ae21fd8
[ 87.797959] RDX: 0000000000402b2f RSI: 0000000000274190 RDI: 00007ff17a75c020
[ 87.798834] RBP: 00000000006040a0 R08: 0000000000000000 R09: 0000000000000802
[ 87.799642] R10: 0000000000000000 R11: 0000000000000212 R12: 00007ff17a75c020
[ 87.800622] R13: 0000000000000003 R14: 0000000000402b2f R15: 0000000000274190
[ 87.801794] Code: 4c 8d a7 98 36 00 00 b9 20 00 00 00 48 c7 c2 53
3d 7a a0 4c 89 e6 4c 89 ef e8 c7 de d0 e0 48 89 df e8 ce cc 01 00 83
f8 01 74 07 <0f> 0b e9 8b 00 00 00 48 8b 75 d0 4c 89 ef e8 50 ff ff ff
48 8d
[ 87.804052] ---[ end trace 312f56694fd4fe31 ]---
[ 87.804653] ------------[ cut here ]------------
[ 87.805450] WARNING: CPU: 0 PID: 1923 at
rtw_os_ndevs_init+0x145/0x1c6 [8188eu]
[ 87.806309] Modules linked in: 8188eu(+) ath9k_htc ath9k_common
rtl8821ae rtl8192se rtl8192de rtl8192cu rtl8192ce rtl8192c_common
rtl_usb rtl_pci rt2800usb rt2800pci rt2800mmio rt2800lib rt2500usb
rt2500pci rt2400pci pppoe ppp_async btcoexist ath9k_hw ath rtlwifi
rtl8xxxu rtl818x_pci rtl8187 rt2x00usb rt2x00pci rt2x00mmio rt2x00lib
rndis_host pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat
ipt_REJECT ipt_MASQUERADE cfg80211 cdc_ether xt_time xt_tcpudp
xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack
xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD usbnet slhc
r8712u r8169 nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4
nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw
nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache
nf_conntrack
[ 87.812829] lib80211_crypt_wep lib80211_crypt_tkip
lib80211_crypt_ccmp lib80211 iptable_mangle iptable_filter ip_tables
e1000e crc_itu_t crc_ccitt compat i2c_dev ip6t_REJECT nf_reject_ipv6
nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables
x_tables igb i2c_algo_bit e1000 tun vfat fat ntfs nls_utf8
nls_iso8859_1 nls_cp437 eeprom_93cx6 xhci_plat_hcd ehci_platform xfs
libcrc32c button_hotplug ptp pps_core mii [last unloaded: 8188eu]
[ 87.816473] CPU: 0 PID: 1923 Comm: modprobe Tainted: G W
4.14.72 #0
[ 87.817694] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 87.819501] task: ffff880006427300 task.stack: ffffc900004f8000
[ 87.820435] RIP: 0010:rtw_os_ndevs_init+0x145/0x1c6 [8188eu]
[ 87.821144] RSP: 0018:ffffc900004fba98 EFLAGS: 00010297
[ 87.821776] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff880006bcc060
[ 87.822521] RDX: ffff880006bcc060 RSI: ffffffff81c7aee0 RDI: 0000000000000000
[ 87.823284] RBP: ffffc900004fbac0 R08: 0000000000000000 R09: 0000000000000003
[ 87.824042] R10: ffffc900004fba28 R11: 0000000000000000 R12: ffff880006bce000
[ 87.824835] R13: 0000000000000001 R14: ffffc9000007d000 R15: ffffffffa082a355
[ 87.825595] FS: 00007ff17b05bb88(0000) GS:ffff880007c00000(0000)
knlGS:0000000000000000
[ 87.826514] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 87.827212] CR2: 00007fe4162ceb40 CR3: 00000000067e2001 CR4: 00000000000606f0
[ 87.827977] Call Trace:
[ 87.828429] rtw_set_hal_ops+0x74d/0x840 [8188eu]
[ 87.829031] usb_probe_interface+0x188/0x220
[ 87.829621] driver_probe_device+0x133/0x2c0
[ 87.830152] __driver_attach+0x6f/0xa0
[ 87.830860] ? driver_probe_device+0x2c0/0x2c0
[ 87.831519] bus_for_each_dev+0x52/0x90
[ 87.832066] driver_attach+0x19/0x20
[ 87.832695] bus_add_driver+0xf0/0x1f0
[ 87.833350] driver_register+0x83/0xc0
[ 87.834041] usb_register_driver+0x7a/0x130
[ 87.834711] ? 0xffffffffa0889000
[ 87.835240] init_module+0x57/0x1000 [8188eu]
[ 87.835839] do_one_initcall+0x9a/0x170
[ 87.836437] ? __vunmap+0x88/0xb0
[ 87.836908] ? vfree+0x60/0x70
[ 87.837404] do_init_module+0x55/0x1d4
[ 87.837938] load_module+0x1b8d/0x2250
[ 87.838473] SyS_init_module+0x107/0x120
[ 87.838980] ? SyS_init_module+0x107/0x120
[ 87.839848] do_syscall_64+0x115/0x1b0
[ 87.840396] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 87.841055] RIP: 0033:0x7ff17ae21fd8
[ 87.841585] RSP: 002b:00007ffc50736b90 EFLAGS: 00000212 ORIG_RAX:
00000000000000af
[ 87.842467] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff17ae21fd8
[ 87.843285] RDX: 0000000000402b2f RSI: 0000000000274190 RDI: 00007ff17a75c020
[ 87.844011] RBP: 00000000006040a0 R08: 0000000000000000 R09: 0000000000000802
[ 87.844801] R10: 0000000000000000 R11: 0000000000000212 R12: 00007ff17a75c020
[ 87.845585] R13: 0000000000000003 R14: 0000000000402b2f R15: 0000000000274190
[ 87.846358] Code: 74 34 0f b6 87 c0 48 00 00 49 8d b6 93 34 00 00
84 c0 74 0d 49 8d b6 a3 34 00 00 3c 01 49 0f 45 f7 e8 fe f0 ff ff 83
f8 01 74 0b <0f> 0b 48 63 c3 4d 8d 2c c4 eb 3c 83 c3 01 eb 0c bb 00 00
00 00
[ 87.848426] ---[ end trace 312f56694fd4fe32 ]---
[ 88.110525] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[ 88.404766] usbcore: registered new interface driver rtl8188eu
Il giorno mar 6 nov 2018 alle ore 03:27 Larry Finger
<[email protected]> ha scritto:
>
> On 11/5/18 5:37 AM, Menion wrote:
> > Hi all
> > I have a question about the support of RTL8188EUS chipset (which I
> > have in a TpLink 0bda:8179 usb dongle)
> > This dongle works with the wext staging driver r8188eu driver. Is it
> > meant to be supported in the rtl2xxx driver?
>
> Assuming that you mean rtl8xxxu, the answer is no. I have no idea what rtl2xxx is.
>
> If you want a cfg80211/nl80211 driver rather than the wext-based one, I am
> currently cleaning up a new driver from Realtek with the possibility of
> replacing the one now in staging with a new version. It can be obtained with the
> following command:
>
> git clone https://github.com/lwfinger/rtl8188eu.git -b v5.2.2.4
>
> This driver will definitely handle your device and has pretty good performance.
> Using a local speedtest.net-type web server, I get up to 50 Mbps down and 45
> Mbps up.
>
> The driver is undergoing fairly rapid change, but mostly to remove lots of dead
> code, thus you will not need to pull that often. It will build on any kernel
> from 4.20 back to at least 2.6.13. I am only testing on 4.20-rc1.
>
> Larry
>