Dear Atheros Experts,
I have an issue with an atheros card that was working fine under suse10=
=2E3 after=20
installation of the madwifi drivers. When installing suse 11.0, a drive=
r was=20
automatically loaded, but it does not work.=20
I have posted the details here: http://forums.opensuse.org/network-
internet/wireless/400074-atheros-5005g-card-doesnt-find-signal.html#pos=
t1898247
Larry proposed me to mail the output of dmesg to you. I would appreciat=
e if=20
you could help me solving this issue.
Thanks in advance
Alexander=20
----------------------------------------------------
The critical section is as follows:
ath5k_pci 0000:02:00.0: registered as 'phy0'
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR5213A chip found (MAC: 0x78, PHY: 0x45)
ath5k phy0: RF2112A 2GHz radio found (0x56)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ath5k phy0: failed to wakeup the MAC Chip
ath5k phy0: can't reset hardware (-5)
pccard: card ejected from slot 0
It appears that the ath5k driver does not support the AR5213A.
Please post these lines to [email protected]. The Atheros =
experts
hang out there.
Larry
=EF=BF=BC=20
2008/11/22 Alexander <[email protected]>:
> Dear Atheros Experts,
>
> I have an issue with an atheros card that was working fine under suse10.3 after
> installation of the madwifi drivers. When installing suse 11.0, a driver was
> automatically loaded, but it does not work.
>
> I have posted the details here: http://forums.opensuse.org/network-
> internet/wireless/400074-atheros-5005g-card-doesnt-find-signal.html#post1898247
>
> Larry proposed me to mail the output of dmesg to you. I would appreciate if
> you could help me solving this issue.
>
> Thanks in advance
>
> Alexander
>
> ----------------------------------------------------
>
> The critical section is as follows:
>
> ath5k_pci 0000:02:00.0: registered as 'phy0'
> phy0: Selected rate control algorithm 'pid'
> ath5k phy0: Atheros AR5213A chip found (MAC: 0x78, PHY: 0x45)
> ath5k phy0: RF2112A 2GHz radio found (0x56)
> ADDRCONF(NETDEV_UP): wlan0: link is not ready
> ath5k phy0: failed to wakeup the MAC Chip
> ath5k phy0: can't reset hardware (-5)
> pccard: card ejected from slot 0
>
> It appears that the ath5k driver does not support the AR5213A.
>
> Please post these lines to [email protected]. The Atheros experts
> hang out there.
>
> Larry
Your card is based on 2413 chip (0x78) (it seems that ath5k doesn't
report your chip name correctly which shouldn't happen).
Can you please check out the latest code from compat-wireless and see
what happens ? Current code supports both 5213 and 2413 chips.
--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick