2007-11-14 16:14:28

by Nick Kossifidis

[permalink] [raw]
Subject: [PATCH 2/4] ath5k: Fix device info reporting

*Fix device info code

Changes-licensed-under: 3-clause-BSD
Signed-Off-by: Nick Kossifidis <[email protected]>

---
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 4c4837f..0d0e060 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -570,22 +570,40 @@ ath5k_pci_probe(struct pci_dev *pdev,
if (ret)
goto err_ah;

- dev_info(&pdev->dev, "Atheros AR%s chip found: MAC 0x%x, PHY: 0x%x\n",
+ dev_info(&pdev->dev, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
sc->ah->ah_mac_srev,
sc->ah->ah_phy_revision);

- if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision){
- dev_info(&pdev->dev, "RF%s radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- } else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
- dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
- sc->ah->ah_radio_2ghz_revision);
+ if(!sc->ah->ah_single_chip){
+ /* Single chip radio (!RF5111) */
+ if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) {
+ /* No 5GHz support -> report 2GHz radio */
+ if(!test_bit(MODE_IEEE80211A, sc->ah->ah_capabilities.cap_mode)){
+ dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* No 2GHz support (5110 and some 5Ghz only cards) -> report 5Ghz radio */
+ } else if(!test_bit(MODE_IEEE80211B, sc->ah->ah_capabilities.cap_mode)){
+ dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* Multiband radio */
+ } else {
+ dev_info(&pdev->dev, "RF%s multiband radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ }
+ }
+ /* Multi chip radio (RF5111 - RF2111) -> report both 2GHz/5GHz radios */
+ else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
+ dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
+ sc->ah->ah_radio_2ghz_revision);
+ }
}






2007-11-15 18:38:23

by Luis R. Rodriguez

[permalink] [raw]
Subject: Re: [PATCH 2/4] ath5k: Fix device info reporting

On Nov 14, 2007 11:14 AM, Nick Kossifidis <[email protected]> wrote:
> *Fix device info code
>
> Changes-licensed-under: 3-clause-BSD
> Signed-Off-by: Nick Kossifidis <[email protected]>
>
> ---
> diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
> index 4c4837f..0d0e060 100644
> --- a/drivers/net/wireless/ath5k/base.c
> +++ b/drivers/net/wireless/ath5k/base.c
> @@ -570,22 +570,40 @@ ath5k_pci_probe(struct pci_dev *pdev,
> if (ret)
> goto err_ah;
>
> - dev_info(&pdev->dev, "Atheros AR%s chip found: MAC 0x%x, PHY: 0x%x\n",
> + dev_info(&pdev->dev, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
> ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
> sc->ah->ah_mac_srev,
> sc->ah->ah_phy_revision);
>
> - if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision){
> - dev_info(&pdev->dev, "RF%s radio found (0x%x)\n",
> - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> - sc->ah->ah_radio_5ghz_revision);
> - } else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
> - dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> - sc->ah->ah_radio_5ghz_revision);
> - dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
> - sc->ah->ah_radio_2ghz_revision);
> + if(!sc->ah->ah_single_chip){

I'm a bit confused here you check for not single chip

> + /* Single chip radio (!RF5111) */
> + if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) {

And here you say it is. Can you elaborate a bit on this?

> + /* No 5GHz support -> report 2GHz radio */
> + if(!test_bit(MODE_IEEE80211A, sc->ah->ah_capabilities.cap_mode)){
> + dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> + sc->ah->ah_radio_5ghz_revision);
> + /* No 2GHz support (5110 and some 5Ghz only cards) -> report 5Ghz radio */
> + } else if(!test_bit(MODE_IEEE80211B, sc->ah->ah_capabilities.cap_mode)){
> + dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> + sc->ah->ah_radio_5ghz_revision);
> + /* Multiband radio */
> + } else {
> + dev_info(&pdev->dev, "RF%s multiband radio found (0x%x)\n",
> + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> + sc->ah->ah_radio_5ghz_revision);
> + }
> + }
> + /* Multi chip radio (RF5111 - RF2111) -> report both 2GHz/5GHz radios */
> + else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
> + dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> + sc->ah->ah_radio_5ghz_revision);
> + dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
> + sc->ah->ah_radio_2ghz_revision);
> + }
> }
>

Thanks,

Luis

2007-11-15 23:59:26

by Nick Kossifidis

[permalink] [raw]
Subject: Re: [ath5k-devel] [PATCH 2/4] ath5k: Fix device info reporting

2007/11/15, Luis R. Rodriguez <[email protected]>:
> On Nov 14, 2007 11:14 AM, Nick Kossifidis <[email protected]> wrote:
> > *Fix device info code
> >
> > Changes-licensed-under: 3-clause-BSD
> > Signed-Off-by: Nick Kossifidis <[email protected]>
> >
> > ---
> > diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
> > index 4c4837f..0d0e060 100644
> > --- a/drivers/net/wireless/ath5k/base.c
> > +++ b/drivers/net/wireless/ath5k/base.c
> > @@ -570,22 +570,40 @@ ath5k_pci_probe(struct pci_dev *pdev,
> > if (ret)
> > goto err_ah;
> >
> > - dev_info(&pdev->dev, "Atheros AR%s chip found: MAC 0x%x, PHY: 0x%x\n",
> > + dev_info(&pdev->dev, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
> > ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
> > sc->ah->ah_mac_srev,
> > sc->ah->ah_phy_revision);
> >
> > - if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision){
> > - dev_info(&pdev->dev, "RF%s radio found (0x%x)\n",
> > - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> > - sc->ah->ah_radio_5ghz_revision);
> > - } else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
> > - dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> > - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> > - sc->ah->ah_radio_5ghz_revision);
> > - dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> > - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
> > - sc->ah->ah_radio_2ghz_revision);
> > + if(!sc->ah->ah_single_chip){
>
> I'm a bit confused here you check for not single chip
>
Single chip solution (ah_single_chip) means PHY chip integrated with
MAC, we don't need to print radio info for them because there are no
separate radio chips.

> > + /* Single chip radio (!RF5111) */
> > + if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) {
>
> And here you say it is. Can you elaborate a bit on this?
>
This is single chip radio, a PHY that both 5HGz/2GHz radios are in one
chip (only 5111 is a dual chip radio with 5111 for 5GHz and 2111 for
2GHz).

> > + /* No 5GHz support -> report 2GHz radio */
> > + if(!test_bit(MODE_IEEE80211A, sc->ah->ah_capabilities.cap_mode)){
> > + dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> > + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> > + sc->ah->ah_radio_5ghz_revision);
> > + /* No 2GHz support (5110 and some 5Ghz only cards) -> report 5Ghz radio */
> > + } else if(!test_bit(MODE_IEEE80211B, sc->ah->ah_capabilities.cap_mode)){
> > + dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> > + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> > + sc->ah->ah_radio_5ghz_revision);
> > + /* Multiband radio */
> > + } else {
> > + dev_info(&pdev->dev, "RF%s multiband radio found (0x%x)\n",
> > + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> > + sc->ah->ah_radio_5ghz_revision);
> > + }
> > + }
> > + /* Multi chip radio (RF5111 - RF2111) -> report both 2GHz/5GHz radios */
> > + else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
> > + dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> > + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> > + sc->ah->ah_radio_5ghz_revision);
> > + dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> > + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
> > + sc->ah->ah_radio_2ghz_revision);
> > + }
> > }
> >
>
> Thanks,
>
> Luis
> _______________________________________________
> ath5k-devel mailing list
> [email protected]
> https://lists.ath5k.org/mailman/listinfo/ath5k-devel
>


--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick

2007-11-16 01:12:48

by Luis R. Rodriguez

[permalink] [raw]
Subject: Re: [ath5k-devel] [PATCH 2/4] ath5k: Fix device info reporting

On Nov 15, 2007 6:59 PM, Nick Kossifidis <[email protected]> wrote:
> 2007/11/15, Luis R. Rodriguez <[email protected]>:
>
> > On Nov 14, 2007 11:14 AM, Nick Kossifidis <[email protected]> wrote:
> > > *Fix device info code
> > >
> > > Changes-licensed-under: 3-clause-BSD
> > > Signed-Off-by: Nick Kossifidis <[email protected]>
> > >
> > > ---
> > > diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
> > > index 4c4837f..0d0e060 100644
> > > --- a/drivers/net/wireless/ath5k/base.c
> > > +++ b/drivers/net/wireless/ath5k/base.c
> > > @@ -570,22 +570,40 @@ ath5k_pci_probe(struct pci_dev *pdev,
> > > if (ret)
> > > goto err_ah;
> > >
> > > - dev_info(&pdev->dev, "Atheros AR%s chip found: MAC 0x%x, PHY: 0x%x\n",
> > > + dev_info(&pdev->dev, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
> > > ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
> > > sc->ah->ah_mac_srev,
> > > sc->ah->ah_phy_revision);
> > >
> > > - if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision){
> > > - dev_info(&pdev->dev, "RF%s radio found (0x%x)\n",
> > > - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> > > - sc->ah->ah_radio_5ghz_revision);
> > > - } else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
> > > - dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
> > > - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
> > > - sc->ah->ah_radio_5ghz_revision);
> > > - dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
> > > - ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
> > > - sc->ah->ah_radio_2ghz_revision);
> > > + if(!sc->ah->ah_single_chip){
> >
> > I'm a bit confused here you check for not single chip
> >
> Single chip solution (ah_single_chip) means PHY chip integrated with
> MAC, we don't need to print radio info for them because there are no
> separate radio chips.

Ah, thanks for clarifying this. Hm, we should rename ah_single_chip
then being that we use "single chip" very differently below. That can
wait though.

> > > + /* Single chip radio (!RF5111) */
> > > + if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) {
> >
> > And here you say it is. Can you elaborate a bit on this?
> >
> This is single chip radio, a PHY that both 5HGz/2GHz radios are in one
> chip (only 5111 is a dual chip radio with 5111 for 5GHz and 2111 for
> 2GHz).
>

Thanks for clarifying this.

Acked-by: Luis R. Rodriguez <[email protected]>

Luis