* Add AR5K_RF2413 to radio check during hw_reset so it doesn't complain
* Write ah_phy_spending value we set during attach instead of checking
each time for radio revision
* Skip txpower setup for RF2413 because it can't transmit with it
(weird thing is that RF5413 has no problem with it).
Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <[email protected]>
---
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 1d7bc1f..3ae5522 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -640,7 +640,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
if (ah->ah_version != AR5K_AR5210) {
if (ah->ah_radio != AR5K_RF5111 &&
ah->ah_radio != AR5K_RF5112 &&
- ah->ah_radio != AR5K_RF5413) {
+ ah->ah_radio != AR5K_RF5413 &&
+ ah->ah_radio != AR5K_RF2413) {
ATH5K_ERR(ah->ah_sc,
"invalid phy radio: %u\n", ah->ah_radio);
return -EINVAL;
@@ -1002,9 +1003,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
- ath5k_hw_reg_write(ah, ah->ah_radio == AR5K_RF5111 ?
- AR5K_PHY_SPENDING_RF5111 : AR5K_PHY_SPENDING_RF5112,
- AR5K_PHY_SPENDING);
+ ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
}
/*
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index e8378d1..75ded08 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -2177,6 +2177,15 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
return -EINVAL;
}
+ /*
+ * RF2413 for some reason can't
+ * transmit anything if we call
+ * this funtion, so we skip it
+ * until we fix txpower.
+ */
+ if(ah->ah_radio == AR5K_RF2413)
+ return 0;
+
/* Reset TX power values */
memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
ah->ah_txpower.txp_tpc = tpc;
On Sat, Feb 23, 2008 at 11:21 PM, Nick Kossifidis <[email protected]> wrote:
> * Add AR5K_RF2413 to radio check during hw_reset so it doesn't complain
>
> * Write ah_phy_spending value we set during attach instead of checking
> each time for radio revision
>
> * Skip txpower setup for RF2413 because it can't transmit with it
> (weird thing is that RF5413 has no problem with it).
>
>
> Changes-licensed-under: ISC
> Signed-off-by: Nick Kossifidis <[email protected]>
Please run through checkpatch.pl.
Luis