On Friday, 27. April 2007, you wrote:
> Hi,
> [...]
> Gru? Stefan
>
(I just add a few cc, maybe someone else is interested too... )
It looks like you've tried your luck with the unmodified kernel driver, right?
Here is an older driver (updated, compiled & tested with 2.6.21-rc5 (actually,
it's an older wireless-dev git) and a Makefile to build it outside of the kernel tree).
Unfortunatly, It can a while until you get an connection. (So, please wait about 5 mins)
untar it, run make and insmod prism54.ko (don't use modprobe, or you may end up
with the wrong kernel module). Also, please check your wpa_supplicant.conf too,
you must enable ONLY TKIP (for group & pairwise) and nothing else!
(this driver changes the iwevent's auth & assoc requests layout slightly: (I added a few spaces to make it readable))
MAC STATE REASON_CODE AID
17:59:18.935038 eth4 Custom driver event:Authenticate request to 00:0F:XX:XX:XX:XX [03 00 0001]
17:59:18.937387 eth4 Custom driver event:Associate request to 00:0F:XX:XX:XX:XX [05 00 0001])
Thanks,
Chr.
> It looks like you've tried your luck with the unmodified kernel driver, right?
Yes, I did not modify to driver, I used the one provided with kernel-2.6.20
> Here is an older driver (updated, compiled & tested with 2.6.21-rc5 (actually,
> it's an older wireless-dev git) and a Makefile to build it outside of the kernel tree).
> Unfortunatly, It can a while until you get an connection. (So, please wait about 5 mins)
I compiled the driver and tested it with kernel-2.6.21.2 and
kernel-2.6.21-rc6-g5363171f
I've attached the logfile from wpa_supplicant and iwevent, and an iwevent output
when using p54 (SOFTMAC driver) as reference, too. The logfiles show only a
short time, but I did some further test (one about 10mins) with the same output,
too. But I did never get a connection, for this Mail I'm using the p54 one...
> untar it, run make and insmod prism54.ko (don't use modprobe, or you may end up
> with the wrong kernel module). Also, please check your wpa_supplicant.conf too,
> you must enable ONLY TKIP (for group & pairwise) and nothing else!
I attached the wpa_supplicant.conf, too. (I think the options "ssid, key_mgmt,
proto and psk" must be set, too don't they?)
If there are important infos missing or if I could test something new, let me
know, I'm still looking forward to get the prism54 one working, too ;-)
Regards Stefan
> If there are important infos missing or if I could test something new, let me
> know, I'm still looking forward to get the prism54 one working, too ;-)
Ups, it seems that I've forgotten the logfiles... ;-)
Regards Stefan