I have a Marvell 8385 card that I am trying to use with a Sharp Zaurus,
a Xscale CPU. The card is completely dead after associating.
It associates, but fails to transmit any data. I applied this patch
<http://lists.infradead.org/pipermail/libertas-dev/2008-January/001130.html>
and now the packet counters increment when I check with ifconfig but the
card still doesn't send or receive any data.
In other words, the card associates nearly instantly, I get good signal
strength with iwconfig, ifconfig shows the RX counter incrementing if I
ping it from outside, but no packets are sent in response.
If I ping outside from inside the Zaurus, the TX counter increments, but
nothing is received on the outside.
Is there anything I can do to help debug this? I am stuck with this
card (I need Channel 13) and that's the only card that provides that.
Thanks,
--Yan