From: Ben Greear <[email protected]>
Old code would not set it to disabled, just assumed that driver
would default to disabled. Change this to explicitly request
bss color be flushed on initial driver configuration.
And I think the beacon-change logic was slightly wrong, so adjust
that as well.
Signed-off-by: Ben Greear <[email protected]>
---
net/mac80211/cfg.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 1c7fb0959cfd..1a6c6c764cbc 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1331,8 +1331,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
changed |= BSS_CHANGED_HE_OBSS_PD;
- if (params->beacon.he_bss_color.enabled)
- changed |= BSS_CHANGED_HE_BSS_COLOR;
+ changed |= BSS_CHANGED_HE_BSS_COLOR;
}
if (params->he_cap) {
@@ -1512,6 +1511,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
int err;
struct ieee80211_bss_conf *link_conf;
u64 changed = 0;
+ bool color_en;
lockdep_assert_wiphy(wiphy);
@@ -1549,9 +1549,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
return err;
changed |= err;
- if (beacon->he_bss_color_valid &&
- beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
- link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
+ color_en = beacon->he_bss_color.enabled && beacon->he_bss_color_valid;
+ if (color_en != link_conf->he_bss_color.enabled) {
+ link_conf->he_bss_color.enabled = color_en;
changed |= BSS_CHANGED_HE_BSS_COLOR;
}
--
2.41.0
On Tue, 2024-01-30 at 10:08 -0800, [email protected] wrote:
> From: Ben Greear <[email protected]>
>
> Old code would not set it to disabled, just assumed that driver
> would default to disabled. Change this to explicitly request
> bss color be flushed on initial driver configuration.
Arguably, the current behaviour is in line with the documentation of
BSS_CHANGED_HE_BSS_COLOR ... but I would tend to agree that
enabling/disabling coloring should be covered by it as well. Lorenzo?
> And I think the beacon-change logic was slightly wrong, so adjust
> that as well.
That's not a great thing for a commit message to say ...
> Signed-off-by: Ben Greear <[email protected]>
> ---
> net/mac80211/cfg.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
> index 1c7fb0959cfd..1a6c6c764cbc 100644
> --- a/net/mac80211/cfg.c
> +++ b/net/mac80211/cfg.c
> @@ -1331,8 +1331,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
> IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
> changed |= BSS_CHANGED_HE_OBSS_PD;
>
> - if (params->beacon.he_bss_color.enabled)
> - changed |= BSS_CHANGED_HE_BSS_COLOR;
> + changed |= BSS_CHANGED_HE_BSS_COLOR;
> }
>
> if (params->he_cap) {
> @@ -1512,6 +1511,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
> int err;
> struct ieee80211_bss_conf *link_conf;
> u64 changed = 0;
> + bool color_en;
>
> lockdep_assert_wiphy(wiphy);
>
> @@ -1549,9 +1549,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
> return err;
> changed |= err;
>
> - if (beacon->he_bss_color_valid &&
> - beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
> - link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
> + color_en = beacon->he_bss_color.enabled && beacon->he_bss_color_valid;
> + if (color_en != link_conf->he_bss_color.enabled) {
> + link_conf->he_bss_color.enabled = color_en;
> changed |= BSS_CHANGED_HE_BSS_COLOR;
> }
>
Not sure how this isn't updating the color itself, Lorenzo?
johannes
> On Tue, 2024-01-30 at 10:08 -0800, [email protected] wrote:
> > From: Ben Greear <[email protected]>
> >
> > Old code would not set it to disabled, just assumed that driver
> > would default to disabled. Change this to explicitly request
> > bss color be flushed on initial driver configuration.
>
> Arguably, the current behaviour is in line with the documentation of
> BSS_CHANGED_HE_BSS_COLOR ... but I would tend to agree that
> enabling/disabling coloring should be covered by it as well. Lorenzo?
>
> > And I think the beacon-change logic was slightly wrong, so adjust
> > that as well.
>
> That's not a great thing for a commit message to say ...
>
> > Signed-off-by: Ben Greear <[email protected]>
> > ---
> > net/mac80211/cfg.c | 10 +++++-----
> > 1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
> > index 1c7fb0959cfd..1a6c6c764cbc 100644
> > --- a/net/mac80211/cfg.c
> > +++ b/net/mac80211/cfg.c
> > @@ -1331,8 +1331,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
> > IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
> > changed |= BSS_CHANGED_HE_OBSS_PD;
> >
> > - if (params->beacon.he_bss_color.enabled)
> > - changed |= BSS_CHANGED_HE_BSS_COLOR;
> > + changed |= BSS_CHANGED_HE_BSS_COLOR;
I think we should use beacon->he_bss_color_valid here instead of
params->beacon.he_bss_color.enabled, agree?
> > }
> >
> > if (params->he_cap) {
> > @@ -1512,6 +1511,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
> > int err;
> > struct ieee80211_bss_conf *link_conf;
> > u64 changed = 0;
> > + bool color_en;
> >
> > lockdep_assert_wiphy(wiphy);
> >
> > @@ -1549,9 +1549,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
> > return err;
> > changed |= err;
> >
> > - if (beacon->he_bss_color_valid &&
> > - beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
> > - link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
> > + color_en = beacon->he_bss_color.enabled && beacon->he_bss_color_valid;
> > + if (color_en != link_conf->he_bss_color.enabled) {
> > + link_conf->he_bss_color.enabled = color_en;
> > changed |= BSS_CHANGED_HE_BSS_COLOR;
> > }
this seems fine to me.
Regards,
Lorenzo
> >
>
> Not sure how this isn't updating the color itself, Lorenzo?
>
> johannes
>
On 2/8/24 7:28 AM, Lorenzo Bianconi wrote:
>> On Tue, 2024-01-30 at 10:08 -0800, [email protected] wrote:
>>> From: Ben Greear <[email protected]>
>>>
>>> Old code would not set it to disabled, just assumed that driver
>>> would default to disabled. Change this to explicitly request
>>> bss color be flushed on initial driver configuration.
>>
>> Arguably, the current behaviour is in line with the documentation of
>> BSS_CHANGED_HE_BSS_COLOR ... but I would tend to agree that
>> enabling/disabling coloring should be covered by it as well. Lorenzo?
>>
>>> And I think the beacon-change logic was slightly wrong, so adjust
>>> that as well.
>>
>> That's not a great thing for a commit message to say ...
>>
>>> Signed-off-by: Ben Greear <[email protected]>
>>> ---
>>> net/mac80211/cfg.c | 10 +++++-----
>>> 1 file changed, 5 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
>>> index 1c7fb0959cfd..1a6c6c764cbc 100644
>>> --- a/net/mac80211/cfg.c
>>> +++ b/net/mac80211/cfg.c
>>> @@ -1331,8 +1331,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
>>> IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
>>> changed |= BSS_CHANGED_HE_OBSS_PD;
>>>
>>> - if (params->beacon.he_bss_color.enabled)
>>> - changed |= BSS_CHANGED_HE_BSS_COLOR;
>>> + changed |= BSS_CHANGED_HE_BSS_COLOR;
>
> I think we should use beacon->he_bss_color_valid here instead of
> params->beacon.he_bss_color.enabled, agree?
Either way, the value changed from un-set/un-known to some value, so why not just
mark it changed and flush to the driver?
Thanks,
Ben
>
>>> }
>>>
>>> if (params->he_cap) {
>>> @@ -1512,6 +1511,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
>>> int err;
>>> struct ieee80211_bss_conf *link_conf;
>>> u64 changed = 0;
>>> + bool color_en;
>>>
>>> lockdep_assert_wiphy(wiphy);
>>>
>>> @@ -1549,9 +1549,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
>>> return err;
>>> changed |= err;
>>>
>>> - if (beacon->he_bss_color_valid &&
>>> - beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
>>> - link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
>>> + color_en = beacon->he_bss_color.enabled && beacon->he_bss_color_valid;
>>> + if (color_en != link_conf->he_bss_color.enabled) {
>>> + link_conf->he_bss_color.enabled = color_en;
>>> changed |= BSS_CHANGED_HE_BSS_COLOR;
>>> }
>
> this seems fine to me. >
> Regards,
> Lorenzo
>
>>>
>>
>> Not sure how this isn't updating the color itself, Lorenzo?
>>
>> johannes
>>
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
> On 2/8/24 7:28 AM, Lorenzo Bianconi wrote:
> > > On Tue, 2024-01-30 at 10:08 -0800, [email protected] wrote:
> > > > From: Ben Greear <[email protected]>
> > > >
> > > > Old code would not set it to disabled, just assumed that driver
> > > > would default to disabled. Change this to explicitly request
> > > > bss color be flushed on initial driver configuration.
> > >
> > > Arguably, the current behaviour is in line with the documentation of
> > > BSS_CHANGED_HE_BSS_COLOR ... but I would tend to agree that
> > > enabling/disabling coloring should be covered by it as well. Lorenzo?
> > >
> > > > And I think the beacon-change logic was slightly wrong, so adjust
> > > > that as well.
> > >
> > > That's not a great thing for a commit message to say ...
> > >
> > > > Signed-off-by: Ben Greear <[email protected]>
> > > > ---
> > > > net/mac80211/cfg.c | 10 +++++-----
> > > > 1 file changed, 5 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
> > > > index 1c7fb0959cfd..1a6c6c764cbc 100644
> > > > --- a/net/mac80211/cfg.c
> > > > +++ b/net/mac80211/cfg.c
> > > > @@ -1331,8 +1331,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
> > > > IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
> > > > changed |= BSS_CHANGED_HE_OBSS_PD;
> > > > - if (params->beacon.he_bss_color.enabled)
> > > > - changed |= BSS_CHANGED_HE_BSS_COLOR;
> > > > + changed |= BSS_CHANGED_HE_BSS_COLOR;
> >
> > I think we should use beacon->he_bss_color_valid here instead of
> > params->beacon.he_bss_color.enabled, agree?
>
> Either way, the value changed from un-set/un-known to some value, so why not just
> mark it changed and flush to the driver?
IIUC what you mean here, if bss color changes from an un-set/un-known to a
configured (valid) value, beacon->he_bss_color_valid will be true
(he_bss_color_valid is used to indicate userspace provided a proper color for
beacons). What is the difference?
The other way around ("undo" some leftover color from a previous run), it
seems a driver/fw bug, and it must be fixed there. Don't you think?
Regards,
Lorenzo
>
> Thanks,
> Ben
>
> >
> > > > }
> > > > if (params->he_cap) {
> > > > @@ -1512,6 +1511,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
> > > > int err;
> > > > struct ieee80211_bss_conf *link_conf;
> > > > u64 changed = 0;
> > > > + bool color_en;
> > > > lockdep_assert_wiphy(wiphy);
> > > > @@ -1549,9 +1549,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
> > > > return err;
> > > > changed |= err;
> > > > - if (beacon->he_bss_color_valid &&
> > > > - beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
> > > > - link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
> > > > + color_en = beacon->he_bss_color.enabled && beacon->he_bss_color_valid;
> > > > + if (color_en != link_conf->he_bss_color.enabled) {
> > > > + link_conf->he_bss_color.enabled = color_en;
> > > > changed |= BSS_CHANGED_HE_BSS_COLOR;
> > > > }
> >
> > this seems fine to me. >
> > Regards,
> > Lorenzo
> >
> > > >
> > >
> > > Not sure how this isn't updating the color itself, Lorenzo?
> > >
> > > johannes
> > >
>
>
> --
> Ben Greear <[email protected]>
> Candela Technologies Inc http://www.candelatech.com
On 2/8/24 07:55, Lorenzo Bianconi wrote:
>> On 2/8/24 7:28 AM, Lorenzo Bianconi wrote:
>>>> On Tue, 2024-01-30 at 10:08 -0800, [email protected] wrote:
>>>>> From: Ben Greear <[email protected]>
>>>>>
>>>>> Old code would not set it to disabled, just assumed that driver
>>>>> would default to disabled. Change this to explicitly request
>>>>> bss color be flushed on initial driver configuration.
>>>>
>>>> Arguably, the current behaviour is in line with the documentation of
>>>> BSS_CHANGED_HE_BSS_COLOR ... but I would tend to agree that
>>>> enabling/disabling coloring should be covered by it as well. Lorenzo?
>>>>
>>>>> And I think the beacon-change logic was slightly wrong, so adjust
>>>>> that as well.
>>>>
>>>> That's not a great thing for a commit message to say ...
>>>>
>>>>> Signed-off-by: Ben Greear <[email protected]>
>>>>> ---
>>>>> net/mac80211/cfg.c | 10 +++++-----
>>>>> 1 file changed, 5 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
>>>>> index 1c7fb0959cfd..1a6c6c764cbc 100644
>>>>> --- a/net/mac80211/cfg.c
>>>>> +++ b/net/mac80211/cfg.c
>>>>> @@ -1331,8 +1331,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
>>>>> IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
>>>>> changed |= BSS_CHANGED_HE_OBSS_PD;
>>>>> - if (params->beacon.he_bss_color.enabled)
>>>>> - changed |= BSS_CHANGED_HE_BSS_COLOR;
>>>>> + changed |= BSS_CHANGED_HE_BSS_COLOR;
>>>
>>> I think we should use beacon->he_bss_color_valid here instead of
>>> params->beacon.he_bss_color.enabled, agree?
>>
>> Either way, the value changed from un-set/un-known to some value, so why not just
>> mark it changed and flush to the driver?
>
> IIUC what you mean here, if bss color changes from an un-set/un-known to a
> configured (valid) value, beacon->he_bss_color_valid will be true
> (he_bss_color_valid is used to indicate userspace provided a proper color for
> beacons). What is the difference?
> The other way around ("undo" some leftover color from a previous run), it
> seems a driver/fw bug, and it must be fixed there. Don't you think?
Well, no. I think the stack should set to known state, thus my original
patch to do so.
But, not worth arguing about as it seems to have no functional difference
at this point.
Thanks,
Ben
>
> Regards,
> Lorenzo
>
>>
>> Thanks,
>> Ben
>>
>>>
>>>>> }
>>>>> if (params->he_cap) {
>>>>> @@ -1512,6 +1511,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
>>>>> int err;
>>>>> struct ieee80211_bss_conf *link_conf;
>>>>> u64 changed = 0;
>>>>> + bool color_en;
>>>>> lockdep_assert_wiphy(wiphy);
>>>>> @@ -1549,9 +1549,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
>>>>> return err;
>>>>> changed |= err;
>>>>> - if (beacon->he_bss_color_valid &&
>>>>> - beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
>>>>> - link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
>>>>> + color_en = beacon->he_bss_color.enabled && beacon->he_bss_color_valid;
>>>>> + if (color_en != link_conf->he_bss_color.enabled) {
>>>>> + link_conf->he_bss_color.enabled = color_en;
>>>>> changed |= BSS_CHANGED_HE_BSS_COLOR;
>>>>> }
>>>
>>> this seems fine to me. >
>>> Regards,
>>> Lorenzo
>>>
>>>>>
>>>>
>>>> Not sure how this isn't updating the color itself, Lorenzo?
>>>>
>>>> johannes
>>>>
>>
>>
>> --
>> Ben Greear <[email protected]>
>> Candela Technologies Inc http://www.candelatech.com
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
> On 2/8/24 07:55, Lorenzo Bianconi wrote:
> > > On 2/8/24 7:28 AM, Lorenzo Bianconi wrote:
> > > > > On Tue, 2024-01-30 at 10:08 -0800, [email protected] wrote:
> > > > > > From: Ben Greear <[email protected]>
> > > > > >
> > > > > > Old code would not set it to disabled, just assumed that driver
> > > > > > would default to disabled. Change this to explicitly request
> > > > > > bss color be flushed on initial driver configuration.
> > > > >
> > > > > Arguably, the current behaviour is in line with the documentation of
> > > > > BSS_CHANGED_HE_BSS_COLOR ... but I would tend to agree that
> > > > > enabling/disabling coloring should be covered by it as well. Lorenzo?
> > > > >
> > > > > > And I think the beacon-change logic was slightly wrong, so adjust
> > > > > > that as well.
> > > > >
> > > > > That's not a great thing for a commit message to say ...
> > > > >
> > > > > > Signed-off-by: Ben Greear <[email protected]>
> > > > > > ---
> > > > > > net/mac80211/cfg.c | 10 +++++-----
> > > > > > 1 file changed, 5 insertions(+), 5 deletions(-)
> > > > > >
> > > > > > diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
> > > > > > index 1c7fb0959cfd..1a6c6c764cbc 100644
> > > > > > --- a/net/mac80211/cfg.c
> > > > > > +++ b/net/mac80211/cfg.c
> > > > > > @@ -1331,8 +1331,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
> > > > > > IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
> > > > > > changed |= BSS_CHANGED_HE_OBSS_PD;
> > > > > > - if (params->beacon.he_bss_color.enabled)
> > > > > > - changed |= BSS_CHANGED_HE_BSS_COLOR;
> > > > > > + changed |= BSS_CHANGED_HE_BSS_COLOR;
> > > >
> > > > I think we should use beacon->he_bss_color_valid here instead of
> > > > params->beacon.he_bss_color.enabled, agree?
> > >
> > > Either way, the value changed from un-set/un-known to some value, so why not just
> > > mark it changed and flush to the driver?
> >
> > IIUC what you mean here, if bss color changes from an un-set/un-known to a
> > configured (valid) value, beacon->he_bss_color_valid will be true
> > (he_bss_color_valid is used to indicate userspace provided a proper color for
> > beacons). What is the difference?
> > The other way around ("undo" some leftover color from a previous run), it
> > seems a driver/fw bug, and it must be fixed there. Don't you think?
>
> Well, no. I think the stack should set to known state, thus my original
> patch to do so.
>
> But, not worth arguing about as it seems to have no functional difference
> at this point.
I think the second part is fine and should be applied.
Regards,
Lorenzo
>
> Thanks,
> Ben
>
> >
> > Regards,
> > Lorenzo
> >
> > >
> > > Thanks,
> > > Ben
> > >
> > > >
> > > > > > }
> > > > > > if (params->he_cap) {
> > > > > > @@ -1512,6 +1511,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
> > > > > > int err;
> > > > > > struct ieee80211_bss_conf *link_conf;
> > > > > > u64 changed = 0;
> > > > > > + bool color_en;
> > > > > > lockdep_assert_wiphy(wiphy);
> > > > > > @@ -1549,9 +1549,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
> > > > > > return err;
> > > > > > changed |= err;
> > > > > > - if (beacon->he_bss_color_valid &&
> > > > > > - beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
> > > > > > - link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
> > > > > > + color_en = beacon->he_bss_color.enabled && beacon->he_bss_color_valid;
> > > > > > + if (color_en != link_conf->he_bss_color.enabled) {
> > > > > > + link_conf->he_bss_color.enabled = color_en;
> > > > > > changed |= BSS_CHANGED_HE_BSS_COLOR;
> > > > > > }
> > > >
> > > > this seems fine to me. >
> > > > Regards,
> > > > Lorenzo
> > > >
> > > > > >
> > > > >
> > > > > Not sure how this isn't updating the color itself, Lorenzo?
> > > > >
> > > > > johannes
> > > > >
> > >
> > >
> > > --
> > > Ben Greear <[email protected]>
> > > Candela Technologies Inc http://www.candelatech.com
>
> --
> Ben Greear <[email protected]>
> Candela Technologies Inc http://www.candelatech.com
>
>