At least two revisions of the D-Link DWA 160 exist, called A1 and A2. A1
(USB-ID 07d1:3c10) is already listed in usb.c as D-Link DWA 160A. A2
(USB-ID 07d1:3a09) works if added to ar9170_usb_ids. I didn't do much
testing until now, but I was able to connect to APs using WPA or WEP and
transmit data. This patch is against current wireless-testing (rev
b648d866b42a29f027262542d636155e3cb4b3cb).
Summary:
* Add model revision number to the comment for D-Link DWA 160 A1 (07d1:3c10)
* Add support for D-Link DWA 160 A2 (07d1:3a09)
Signed-off-by: Thomas Klute <[email protected]>
---
drivers/net/wireless/ath/ar9170/usb.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ar9170/usb.c
b/drivers/net/wireless/ath/ar9170/usb.c
index 6bdcdf6..e0799d9 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -68,8 +68,10 @@ static struct usb_device_id ar9170_usb_ids[] = {
{ USB_DEVICE(0x0cf3, 0x1002) },
/* Cace Airpcap NX */
{ USB_DEVICE(0xcace, 0x0300) },
- /* D-Link DWA 160A */
+ /* D-Link DWA 160 A1 */
{ USB_DEVICE(0x07d1, 0x3c10) },
+ /* D-Link DWA 160 A2 */
+ { USB_DEVICE(0x07d1, 0x3a09) },
/* Netgear WNDA3100 */
{ USB_DEVICE(0x0846, 0x9010) },
/* Netgear WN111 v2 */