hostap only supports Intersil firmware. Symbol firmware is supported by
orinoco.
Signed-off-by: Pavel Roskin <[email protected]>
---
drivers/net/wireless/hostap/hostap_cs.c | 1 -
drivers/net/wireless/hostap/hostap_plx.c | 1 -
2 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index c052a0d..2fda69a 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -623,7 +623,6 @@ static int hostap_cs_resume(struct pcmcia_device *link)
static const struct pcmcia_device_id hostap_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
- PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301),
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index 33e7903..772efd4 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -88,7 +88,6 @@ static struct prism2_plx_manfid {
} prism2_plx_known_manfids[] = {
{ 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */,
{ 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */,
- { 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */,
{ 0x0126, 0x8000 } /* Proxim RangeLAN */,
{ 0x0138, 0x0002 } /* Compaq WL100 */,
{ 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */,
On 07/14/2011 06:37 PM, Pavel Roskin wrote:
> hostap only supports Intersil firmware. Symbol firmware is supported by
> orinoco.
Sorry, the patch is wrong. I misinterpreted a bug report. Several
webpages indicate that 3CRWE777A actually uses Intersil firmware.
http://www.wikidevi.com/wiki/3Com_AirConnect_3CRWE777A
http://www.linuxquestions.org/questions/linux-networking-3/redhat-9-0-3com-airconnect-3crwe777a-114501/
http://gothmog.homeunix.net/blog/?p=78
Sorry for the noise :(
--
Regards,
Pavel Roskin