Hi,
after hibernation,
I tried modprob b43 and /etc/initi.d/network-manager restart not work,
is it reboot the only option. ( I googled it seems, not so sure)
Thanks,
On 01/09/2012 10:25 PM, lina wrote:
> On Tuesday 10,January,2012 01:19 AM, Larry Finger wrote:
>> On 01/08/2012 10:09 PM, lina wrote:
>>> On Monday 09,January,2012 05:44 AM, Rafał Miłecki wrote:
>>>> Does your kernel have
>>>> [PATCH] bcma: support for suspend and resume
>>>> applied?
>>>
>>> I don't know how to check, googled for a while, found some thread, but
>>> did not
>>> find the patch, is it in the kernel.org [patch] part, I thought the [full
>>> source] is already patched?
>>
>> The mainline kernel v3.2-3191-g36e9db2 has that patch.
>
> when I tried to open
> http://www.kernel.org/diff/diffview.cgi?file=/pub/linux/kernel/v3.0/patch-3.2.bz2
>
> diffview is looping on the cached resource:
> /home/httpd/cache/diffview/ZM/ZMxXxIlPZnZ9405Mc9XmGRWFlkM/index
>
> when I googled v3.2-3191-g36e9db2, it leads me to this thread only.
>
> sorry, I am confusing about how to get this patch and make it to patch.
>
> Thanks for your time,
Get the bleeding-edge version of compat-wireless. That will *always* get you the
latest set of patches.
Larry
On Tuesday 10,January,2012 12:58 PM, Larry Finger wrote:
> On 01/09/2012 10:25 PM, lina wrote:
>> On Tuesday 10,January,2012 01:19 AM, Larry Finger wrote:
>>> On 01/08/2012 10:09 PM, lina wrote:
>>>> On Monday 09,January,2012 05:44 AM, Rafał Miłecki wrote:
>>>>> Does your kernel have
>>>>> [PATCH] bcma: support for suspend and resume
>>>>> applied?
>>>>
>>>> I don't know how to check, googled for a while, found some thread, but
>>>> did not
>>>> find the patch, is it in the kernel.org [patch] part, I thought the
>>>> [full
>>>> source] is already patched?
>>>
>>> The mainline kernel v3.2-3191-g36e9db2 has that patch.
>>
>> when I tried to open
>> http://www.kernel.org/diff/diffview.cgi?file=/pub/linux/kernel/v3.0/patch-3.2.bz2
>>
>>
>> diffview is looping on the cached resource:
>> /home/httpd/cache/diffview/ZM/ZMxXxIlPZnZ9405Mc9XmGRWFlkM/index
>>
>> when I googled v3.2-3191-g36e9db2, it leads me to this thread only.
>>
>> sorry, I am confusing about how to get this patch and make it to patch.
>>
>> Thanks for your time,
>
> Get the bleeding-edge version of compat-wireless. That will *always* get
> you the latest set of patches.
Thanks, I just installed the compat-wireless-2012-01-09.tar.bz2
will keep update.
>
> Larry
>
On Tuesday 10,January,2012 01:19 AM, Larry Finger wrote:
> On 01/08/2012 10:09 PM, lina wrote:
>> On Monday 09,January,2012 05:44 AM, Rafał Miłecki wrote:
>>> Does your kernel have
>>> [PATCH] bcma: support for suspend and resume
>>> applied?
>>
>> I don't know how to check, googled for a while, found some thread, but
>> did not
>> find the patch, is it in the kernel.org [patch] part, I thought the [full
>> source] is already patched?
>
> The mainline kernel v3.2-3191-g36e9db2 has that patch.
when I tried to open
http://www.kernel.org/diff/diffview.cgi?file=/pub/linux/kernel/v3.0/patch-3.2.bz2
diffview is looping on the cached resource:
/home/httpd/cache/diffview/ZM/ZMxXxIlPZnZ9405Mc9XmGRWFlkM/index
when I googled v3.2-3191-g36e9db2, it leads me to this thread only.
sorry, I am confusing about how to get this patch and make it to patch.
Thanks for your time,
>
> Larry
>
On Monday 09,January,2012 05:44 AM, Rafał Miłecki wrote:
> 2012/1/8 lina<[email protected]>:
>> On Monday 09,January,2012 12:05 AM, Larry Finger wrote:
>>>
>>> On 01/08/2012 08:40 AM, lina wrote:
>>>>
>>>> Hi,
>>>>
>>>> after hibernation,
>>>>
>>>> I tried modprob b43 and /etc/initi.d/network-manager restart not work,
>>>>
>>>> is it reboot the only option. ( I googled it seems, not so sure)
>>>
>>>
>>> Hibernation involves so many parts of the computer that it is hard to
>>> tell what is happening. If unloading and reloading b43 using modprobe
>>> does not help, then it is not solely a problem with b43.
>>>
>>> You need to provide a better description of what you are doing. Include
>>> specific output from dmesg and the exact commands you are trying. You
>>> should also include what distro you are running, your kernel version,
>>> and what brand and model of computer you are using.
>>
>>
>> It's fine with me to reboot.
>>
>> 3.2.0-1 SMP x86_64 GNU/Linux
>>
>> Debian wheezy.
>>
>> I upload the dmesg output in the following link,
>>
>> https://docs.google.com/open?id=0B93SVRfpVVg3ZThiYmQ3NjctOWU2Ni00ODQ5LTgzMGMtMGMyMDgxMjVjYTFl
>>
>> It's absolutely not something urgent or very-necessary to me, so just take
>> your time and interest, I was just asking. btw, if there is some problem in
>> the dmesg, maybe not high relevant to this topic, please also feel free to
>> let me know.
>> any further info you need just let me know,
>
> I'm not sure if I can see suspend&resume in your dmesg...
I uploaded the new dmesg output in the following link:
before hibernation:
https://docs.google.com/leaf?id=0B93SVRfpVVg3ODVmMjc1MTEtZDlhNi00YjVlLWJlYmYtNmVjYmExYTIwMDFh&hl=en_US
after hibernation:
https://docs.google.com/open?id=0B93SVRfpVVg3YWNkMzljYTctMGQ0Zi00MTRhLWIyODItMTQ3ZGIyNjQyZDNm
[ 2704.950566] bcma: PLL enable timeout
[ 2704.950628] ------------[ cut here ]------------
[ 2704.950649] WARNING: at
/var/local/cache/alien/compat-wireless-2012-01-07/drivers/net/wireless/b43/main.c:2453
b43_wireless_core_init+0x1275/0x12a0 [b43]()
[ 2704.950656] Hardware name: MacBookPro8,2
[ 2704.950659] Modules linked in: arc4 b43(O) mac80211(O) cfg80211(O)
ssb(O) pcmcia pcmcia_core rng_core fglrx(P) uvcvideo videodev video
v4l2_compat_ioctl32 tg3 [last unloaded: scsi_wait_scan]
[ 2704.950691] Pid: 2153, comm: NetworkManager Tainted: P O
3.2.0-1-lina #1
[ 2704.950696] Call Trace:
[ 2704.950709] [<ffffffff8106378b>] ? warn_slowpath_common+0x7b/0xc0
[ 2704.950722] [<ffffffffa043de85>] ?
b43_wireless_core_init+0x1275/0x12a0 [b43]
[ 2704.950735] [<ffffffff81543e65>] ? inet6_fill_link_af+0x15/0x30
[ 2704.950747] [<ffffffffa043e570>] ? b43_op_start+0x1b0/0x1d0 [b43]
[ 2704.950767] [<ffffffffa03d16c9>] ? ieee80211_do_open+0x299/0xa30
[mac80211]
[ 2704.950784] [<ffffffffa03cf7f2>] ?
ieee80211_check_concurrent_iface+0x22/0x1a0 [mac80211]
[ 2704.950793] [<ffffffff814b32f6>] ? __dev_open+0x86/0xe0
[ 2704.950799] [<ffffffff814b358a>] ? __dev_change_flags+0x9a/0x180
[ 2704.950806] [<ffffffff814b3720>] ? dev_change_flags+0x20/0x70
[ 2704.950816] [<ffffffff814beef6>] ? do_setlink+0x276/0x9a0
[ 2704.950826] [<ffffffff814a156d>] ? sock_rmalloc+0x2d/0x90
[ 2704.950835] [<ffffffff8129563d>] ? nla_parse+0x2d/0xd0
[ 2704.950844] [<ffffffff814c08c0>] ? __rtnl_unlock+0x10/0x10
[ 2704.950852] [<ffffffff814bf6d2>] ? rtnl_setlink+0xb2/0x110
[ 2704.950863] [<ffffffff814da9b9>] ? netlink_rcv_skb+0x99/0xc0
[ 2704.950871] [<ffffffff814be988>] ? rtnetlink_rcv+0x18/0x20
[ 2704.950879] [<ffffffff814da2b1>] ? netlink_unicast+0x2b1/0x300
[ 2704.950888] [<ffffffff814da5e9>] ? netlink_sendmsg+0x2e9/0x340
[ 2704.950896] [<ffffffff8149a350>] ? sock_sendmsg+0x110/0x130
[ 2704.950904] [<ffffffff8149a350>] ? sock_sendmsg+0x110/0x130
[ 2704.950912] [<ffffffff8149cccc>] ? move_addr_to_kernel+0x4c/0x90
[ 2704.950919] [<ffffffff814a7ae6>] ? verify_iovec+0x56/0xd0
[ 2704.950927] [<ffffffff8149b996>] ? __sys_sendmsg+0x3a6/0x3c0
[ 2704.950935] [<ffffffff81156e1c>] ? do_path_lookup+0x2c/0xc0
[ 2704.950944] [<ffffffff8113b47a>] ? kmem_cache_free+0x2a/0x110
[ 2704.950951] [<ffffffff8149d7d6>] ? sys_sendto+0x136/0x190
[ 2704.950960] [<ffffffff8149dc54>] ? sys_sendmsg+0x44/0x80
[ 2704.950971] [<ffffffff815bed92>] ? system_call_fastpath+0x16/0x1b
[ 2704.950976] ---[ end trace 6fce5487e497336c ]---
[ 2706.114589] b43-phy0 ERROR: Microcode not responding
[ 2706.114600] b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
download the correct firmware for this driver version. Please carefully
read all instructions on this website.
[ 2706.117610] ------------[ cut here ]------------
[ 2706.117638] WARNING: at
/var/local/cache/alien/compat-wireless-2012-01-07/drivers/net/wireless/b43/main.c:2453
b43_wireless_core_init+0x1275/0x12a0 [b43]()
[ 2706.117646] Hardware name: MacBookPro8,2
[ 2706.117649] Modules linked in: arc4 b43(O) mac80211(O) cfg80211(O)
ssb(O) pcmcia pcmcia_core rng_core fglrx(P) uvcvideo videodev video
v4l2_compat_ioctl32 tg3 [last unloaded: scsi_wait_scan]
[ 2706.117680] Pid: 5214, comm: wpa_supplicant Tainted: P W O
3.2.0-1-lina #1
[ 2706.117686] Call Trace:
[ 2706.117700] [<ffffffff8106378b>] ? warn_slowpath_common+0x7b/0xc0
[ 2706.117713] [<ffffffffa043de85>] ?
b43_wireless_core_init+0x1275/0x12a0 [b43]
[ 2706.117724] [<ffffffff81055fcf>] ? update_shares+0xbf/0xf0
[ 2706.117736] [<ffffffffa043e570>] ? b43_op_start+0x1b0/0x1d0 [b43]
[ 2706.117758] [<ffffffffa03d16c9>] ? ieee80211_do_open+0x299/0xa30
[mac80211]
[ 2706.117782] [<ffffffffa03cf7f2>] ?
ieee80211_check_concurrent_iface+0x22/0x1a0 [mac80211]
[ 2706.117793] [<ffffffff814b32f6>] ? __dev_open+0x86/0xe0
[ 2706.117803] [<ffffffff814b358a>] ? __dev_change_flags+0x9a/0x180
[ 2706.117812] [<ffffffff814b3720>] ? dev_change_flags+0x20/0x70
[ 2706.117825] [<ffffffff81514fcf>] ? devinet_ioctl+0x61f/0x7b0
[ 2706.117838] [<ffffffff81499d89>] ? sock_do_ioctl+0x29/0x60
[ 2706.117847] [<ffffffff8149ad34>] ? sock_ioctl+0x74/0x2e0
[ 2706.117856] [<ffffffff8115a216>] ? do_vfs_ioctl+0x96/0x550
[ 2706.117865] [<ffffffff8115ef2a>] ? dput+0xda/0x1c0
[ 2706.117872] [<ffffffff8115a768>] ? sys_ioctl+0x98/0xa0
[ 2706.117883] [<ffffffff815bed92>] ? system_call_fastpath+0x16/0x1b
[ 2706.117889] ---[ end trace 6fce5487e497336d ]---
[ 2707.281486] b43-phy0 ERROR: Microcode not responding
[ 2707.281497] b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
download the correct firmware for this driver version. Please carefully
read all instructions on this website.
[ 2707.415448] bcma: PLL enable timeout
[ 2707.415503] ------------[ cut here ]------------
[ 2707.415524] WARNING: at
/var/local/cache/alien/compat-wireless-2012-01-07/drivers/net/wireless/b43/main.c:2453
b43_wireless_core_init+0x1275/0x12a0 [b43]()
[ 2707.415531] Hardware name: MacBookPro8,2
[ 2707.415534] Modules linked in: arc4 b43(O) mac80211(O) cfg80211(O)
ssb(O) pcmcia pcmcia_core rng_core fglrx(P) uvcvideo videodev video
v4l2_compat_ioctl32 tg3 [last unloaded: scsi_wait_scan]
[ 2707.415565] Pid: 5214, comm: wpa_supplicant Tainted: P W O
3.2.0-1-lina #1
[ 2707.415570] Call Trace:
[ 2707.415584] [<ffffffff8106378b>] ? warn_slowpath_common+0x7b/0xc0
[ 2707.415597] [<ffffffffa043de85>] ?
b43_wireless_core_init+0x1275/0x12a0 [b43]
[ 2707.415608] [<ffffffff815b6386>] ? mutex_lock+0x16/0x40
[ 2707.415620] [<ffffffffa043e570>] ? b43_op_start+0x1b0/0x1d0 [b43]
[ 2707.415640] [<ffffffffa03d16c9>] ? ieee80211_do_open+0x299/0xa30
[mac80211]
[ 2707.415657] [<ffffffffa03cf7f2>] ?
ieee80211_check_concurrent_iface+0x22/0x1a0 [mac80211]
[ 2707.415666] [<ffffffff814b32f6>] ? __dev_open+0x86/0xe0
[ 2707.415673] [<ffffffff814b358a>] ? __dev_change_flags+0x9a/0x180
[ 2707.415679] [<ffffffff814b3720>] ? dev_change_flags+0x20/0x70
[ 2707.415688] [<ffffffff81514fcf>] ? devinet_ioctl+0x61f/0x7b0
[ 2707.415697] [<ffffffff81499d89>] ? sock_do_ioctl+0x29/0x60
[ 2707.415705] [<ffffffff8149ad34>] ? sock_ioctl+0x74/0x2e0
[ 2707.415714] [<ffffffff8115a216>] ? do_vfs_ioctl+0x96/0x550
[ 2707.415721] [<ffffffff8149d041>] ? sys_bind+0xe1/0x100
[ 2707.415728] [<ffffffff8115a768>] ? sys_ioctl+0x98/0xa0
[ 2707.415739] [<ffffffff815bed92>] ? system_call_fastpath+0x16/0x1b
[ 2707.415744] ---[ end trace 6fce5487e497336e ]---
[ 2708.580286] b43-phy0 ERROR: Microcode not responding
[ 2708.580297] b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
download the correct firmware for this driver version. Please carefully
read all instructions on this website.
[ 2731.104322] applesmc: FS! : read arg fail
>
> What does happen after resume? What after reloading b43? Have you
> tried reloading both: b43 and bcma:
> rmmod b43
> rmmod bcma
> modprobe b43
> ?
I did both now.
> Does your kernel have
> [PATCH] bcma: support for suspend and resume
> applied?
I don't know how to check, googled for a while, found some thread, but
did not find the patch, is it in the kernel.org [patch] part, I thought
the [full source] is already patched?
>
On 01/08/2012 08:40 AM, lina wrote:
> Hi,
>
> after hibernation,
>
> I tried modprob b43 and /etc/initi.d/network-manager restart not work,
>
> is it reboot the only option. ( I googled it seems, not so sure)
Hibernation involves so many parts of the computer that it is hard to tell what
is happening. If unloading and reloading b43 using modprobe does not help, then
it is not solely a problem with b43.
You need to provide a better description of what you are doing. Include specific
output from dmesg and the exact commands you are trying. You should also include
what distro you are running, your kernel version, and what brand and model of
computer you are using.
Larry
On Monday 09,January,2012 12:05 AM, Larry Finger wrote:
> On 01/08/2012 08:40 AM, lina wrote:
>> Hi,
>>
>> after hibernation,
>>
>> I tried modprob b43 and /etc/initi.d/network-manager restart not work,
>>
>> is it reboot the only option. ( I googled it seems, not so sure)
>
> Hibernation involves so many parts of the computer that it is hard to
> tell what is happening. If unloading and reloading b43 using modprobe
> does not help, then it is not solely a problem with b43.
>
> You need to provide a better description of what you are doing. Include
> specific output from dmesg and the exact commands you are trying. You
> should also include what distro you are running, your kernel version,
> and what brand and model of computer you are using.
It's fine with me to reboot.
3.2.0-1 SMP x86_64 GNU/Linux
Debian wheezy.
I upload the dmesg output in the following link,
https://docs.google.com/open?id=0B93SVRfpVVg3ZThiYmQ3NjctOWU2Ni00ODQ5LTgzMGMtMGMyMDgxMjVjYTFl
It's absolutely not something urgent or very-necessary to me, so just
take your time and interest, I was just asking. btw, if there is some
problem in the dmesg, maybe not high relevant to this topic, please also
feel free to let me know.
any further info you need just let me know,
Thanks,
>
> Larry
>
2012/1/8 lina <[email protected]>:
> On Monday 09,January,2012 12:05 AM, Larry Finger wrote:
>>
>> On 01/08/2012 08:40 AM, lina wrote:
>>>
>>> Hi,
>>>
>>> after hibernation,
>>>
>>> I tried modprob b43 and /etc/initi.d/network-manager restart not work,
>>>
>>> is it reboot the only option. ( I googled it seems, not so sure)
>>
>>
>> Hibernation involves so many parts of the computer that it is hard to
>> tell what is happening. If unloading and reloading b43 using modprobe
>> does not help, then it is not solely a problem with b43.
>>
>> You need to provide a better description of what you are doing. Include
>> specific output from dmesg and the exact commands you are trying. You
>> should also include what distro you are running, your kernel version,
>> and what brand and model of computer you are using.
>
>
> It's fine with me to reboot.
>
> 3.2.0-1 SMP x86_64 GNU/Linux
>
> Debian wheezy.
>
> I upload the dmesg output in the following link,
>
> https://docs.google.com/open?id=0B93SVRfpVVg3ZThiYmQ3NjctOWU2Ni00ODQ5LTgzMGMtMGMyMDgxMjVjYTFl
>
> It's absolutely not something urgent or very-necessary to me, so just take
> your time and interest, I was just asking. btw, if there is some problem in
> the dmesg, maybe not high relevant to this topic, please also feel free to
> let me know.
> any further info you need just let me know,
I'm not sure if I can see suspend&resume in your dmesg...
What does happen after resume? What after reloading b43? Have you
tried reloading both: b43 and bcma:
rmmod b43
rmmod bcma
modprobe b43
?
Does your kernel have
[PATCH] bcma: support for suspend and resume
applied?
--
Rafał
On 01/08/2012 10:09 PM, lina wrote:
> On Monday 09,January,2012 05:44 AM, Rafał Miłecki wrote:
>> Does your kernel have
>> [PATCH] bcma: support for suspend and resume
>> applied?
>
> I don't know how to check, googled for a while, found some thread, but did not
> find the patch, is it in the kernel.org [patch] part, I thought the [full
> source] is already patched?
The mainline kernel v3.2-3191-g36e9db2 has that patch.
Larry