A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the
same condition twice. The problem was found using cppcheck-1.49, and the
proper fix was verified against the pre-mac80211 version of the code.
Reported-by: David Binderman <[email protected]>
Signed-off-by: Larry Finger <[email protected]>
Cc: stable <[email protected]> [back to 2.6.39]
---
John,
Obviously, this is a bug in 3.0 and 2.6.39, but it has a minor impact.
I think we should just push it to 3.1 and let stable get it for the
earlier versions, but as usual, it is your call.
Larry
---
Index: wireless-testing-new/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
===================================================================
--- wireless-testing-new.orig/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
+++ wireless-testing-new/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
@@ -104,7 +104,7 @@ void rtl92cu_phy_rf6052_set_cck_txpower(
tx_agc[RF90_PATH_A] = 0x10101010;
tx_agc[RF90_PATH_B] = 0x10101010;
} else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
- TXHIGHPWRLEVEL_LEVEL1) {
+ TXHIGHPWRLEVEL_LEVEL2) {
tx_agc[RF90_PATH_A] = 0x00000000;
tx_agc[RF90_PATH_B] = 0x00000000;
} else{