Some time ago I found an old USB wireless dongle in my drawer. I was
surprised it wasn't supported in Linux. Google gave me an old
unfinished driver created by Christoph Hellwig. Armed with some
spare time and naivity I picked up where Christoph left in 2007 and
now it's actually working pretty fine. It does not crash for me and
throughput is decent.
It's based on the FreeBSD driver, which in turn is based on the
reverse engineered Windows driver, hence a very limited feature set.
Not even HW crypto offload is supported. But at least there is a
firmware which has a suitable license:
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/contrib/dev/uath/ar5523.bin.uu
Changes v1 to v2:
* Place driver in drivers/net/wireless/ath instead of staging.
* Change to same license as ath9k as suggested by Luis.
* Add comment about shutting up errors on USB disconnect.
* Use ALIGN() / IS_ALIGNED() for alignment fix / check.
* Fix whitespace on file ending.
* Bugfix: Avoid % 512 transfer sizes on TX as the FW will hang.
* Bugfix: Change filtering so that [mb]cast are properly RXed.
Pontus Fuchs (4):
ar5523: Add main driver file
ar5523: Add driver header file
Add Firmware API header file
Add Kconfig and Makefile. Add MAINTAINERS entry
MAINTAINERS | 6 +
drivers/net/wireless/ath/Kconfig | 1 +
drivers/net/wireless/ath/Makefile | 1 +
drivers/net/wireless/ath/ar5523/Kconfig | 7 +
drivers/net/wireless/ath/ar5523/Makefile | 1 +
drivers/net/wireless/ath/ar5523/ar5523.c | 1816 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ar5523/ar5523.h | 155 +++
drivers/net/wireless/ath/ar5523/ar5523_hw.h | 434 +++++++
8 files changed, 2421 insertions(+)
create mode 100644 drivers/net/wireless/ath/ar5523/Kconfig
create mode 100644 drivers/net/wireless/ath/ar5523/Makefile
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523.c
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523.h
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523_hw.h
--
1.7.9.5
On Thu, Oct 18, 2012 at 12:31:07PM +0200, Pontus Fuchs wrote:
> Yes. I hope so. A while ago I asked Christoph if he wanted to be copyright
> holder under BSD or GPL and he said he was fine either way.
>
> Christoph: Can you confirm still is still the case?
I'm still fine either way.
> + * Copyright (c) 2006
> + * Damien Bergamini <[email protected]>
> + * Copyright (c) 2007
> + * Christoph Hellwig <[email protected]>
> + *
> + * Copyright (c) 2006 Sam Leffler, Errno Consulting
> + * Copyright (c) 2008-2009 Weongyo Jeong <[email protected]>
> + * Copyright (c) 2012 Pontus Fuchs <[email protected]>
Might be worth to use the same style for everyone and put them in chonological
order?
Structures and defines used for communication with the FW.
Signed-off-by: Pontus Fuchs <[email protected]>
---
drivers/net/wireless/ath/ar5523/ar5523_hw.h | 434 +++++++++++++++++++++++++++
1 file changed, 434 insertions(+)
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523_hw.h
diff --git a/drivers/net/wireless/ath/ar5523/ar5523_hw.h b/drivers/net/wireless/ath/ar5523/ar5523_hw.h
new file mode 100644
index 0000000..7390061
--- /dev/null
+++ b/drivers/net/wireless/ath/ar5523/ar5523_hw.h
@@ -0,0 +1,434 @@
+/*
+ * Copyright (c) 2006
+ * Damien Bergamini <[email protected]>
+ * Copyright (c) 2007
+ * Christoph Hellwig <[email protected]>
+ *
+ * Copyright (c) 2006 Sam Leffler, Errno Consulting
+ * Copyright (c) 2008-2009 Weongyo Jeong <[email protected]>
+ * Copyright (c) 2012 Pontus Fuchs <[email protected]>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* all fields are big endian */
+struct ar5523_fwblock {
+ __be32 flags;
+#define AR5523_WRITE_BLOCK (1 << 4)
+
+ __be32 len;
+#define AR5523_MAX_FWBLOCK_SIZE 2048
+
+ __be32 total;
+ __be32 remain;
+ __be32 rxtotal;
+ __be32 pad[123];
+} __packed;
+
+#define AR5523_MAX_RXCMDSZ 1024
+#define AR5523_MAX_TXCMDSZ 1024
+
+struct ar5523_cmd_hdr {
+ __be32 len;
+ __be32 code;
+/* NB: these are defined for rev 1.5 firmware; rev 1.6 is different */
+/* messages from Host -> Target */
+#define WDCMSG_HOST_AVAILABLE 0x01
+#define WDCMSG_BIND 0x02
+#define WDCMSG_TARGET_RESET 0x03
+#define WDCMSG_TARGET_GET_CAPABILITY 0x04
+#define WDCMSG_TARGET_SET_CONFIG 0x05
+#define WDCMSG_TARGET_GET_STATUS 0x06
+#define WDCMSG_TARGET_GET_STATS 0x07
+#define WDCMSG_TARGET_START 0x08
+#define WDCMSG_TARGET_STOP 0x09
+#define WDCMSG_TARGET_ENABLE 0x0a
+#define WDCMSG_TARGET_DISABLE 0x0b
+#define WDCMSG_CREATE_CONNECTION 0x0c
+#define WDCMSG_UPDATE_CONNECT_ATTR 0x0d
+#define WDCMSG_DELETE_CONNECT 0x0e
+#define WDCMSG_SEND 0x0f
+#define WDCMSG_FLUSH 0x10
+/* messages from Target -> Host */
+#define WDCMSG_STATS_UPDATE 0x11
+#define WDCMSG_BMISS 0x12
+#define WDCMSG_DEVICE_AVAIL 0x13
+#define WDCMSG_SEND_COMPLETE 0x14
+#define WDCMSG_DATA_AVAIL 0x15
+#define WDCMSG_SET_PWR_MODE 0x16
+#define WDCMSG_BMISS_ACK 0x17
+#define WDCMSG_SET_LED_STEADY 0x18
+#define WDCMSG_SET_LED_BLINK 0x19
+/* more messages */
+#define WDCMSG_SETUP_BEACON_DESC 0x1a
+#define WDCMSG_BEACON_INIT 0x1b
+#define WDCMSG_RESET_KEY_CACHE 0x1c
+#define WDCMSG_RESET_KEY_CACHE_ENTRY 0x1d
+#define WDCMSG_SET_KEY_CACHE_ENTRY 0x1e
+#define WDCMSG_SET_DECOMP_MASK 0x1f
+#define WDCMSG_SET_REGULATORY_DOMAIN 0x20
+#define WDCMSG_SET_LED_STATE 0x21
+#define WDCMSG_WRITE_ASSOCID 0x22
+#define WDCMSG_SET_STA_BEACON_TIMERS 0x23
+#define WDCMSG_GET_TSF 0x24
+#define WDCMSG_RESET_TSF 0x25
+#define WDCMSG_SET_ADHOC_MODE 0x26
+#define WDCMSG_SET_BASIC_RATE 0x27
+#define WDCMSG_MIB_CONTROL 0x28
+#define WDCMSG_GET_CHANNEL_DATA 0x29
+#define WDCMSG_GET_CUR_RSSI 0x2a
+#define WDCMSG_SET_ANTENNA_SWITCH 0x2b
+#define WDCMSG_USE_SHORT_SLOT_TIME 0x2f
+#define WDCMSG_SET_POWER_MODE 0x30
+#define WDCMSG_SETUP_PSPOLL_DESC 0x31
+#define WDCMSG_SET_RX_MULTICAST_FILTER 0x32
+#define WDCMSG_RX_FILTER 0x33
+#define WDCMSG_PER_CALIBRATION 0x34
+#define WDCMSG_RESET 0x35
+#define WDCMSG_DISABLE 0x36
+#define WDCMSG_PHY_DISABLE 0x37
+#define WDCMSG_SET_TX_POWER_LIMIT 0x38
+#define WDCMSG_SET_TX_QUEUE_PARAMS 0x39
+#define WDCMSG_SETUP_TX_QUEUE 0x3a
+#define WDCMSG_RELEASE_TX_QUEUE 0x3b
+#define WDCMSG_SET_DEFAULT_KEY 0x43
+
+ __u32 priv; /* driver private data,
+ don't care about endianess */
+ __be32 magic;
+ __be32 reserved2[4];
+};
+
+struct ar5523_cmd_host_available {
+ __be32 sw_ver_major;
+ __be32 sw_ver_minor;
+ __be32 sw_ver_patch;
+ __be32 sw_ver_build;
+} __packed;
+
+#define ATH_SW_VER_MAJOR 1
+#define ATH_SW_VER_MINOR 5
+#define ATH_SW_VER_PATCH 0
+#define ATH_SW_VER_BUILD 9999
+
+struct ar5523_chunk {
+ u8 seqnum; /* sequence number for ordering */
+ u8 flags;
+#define UATH_CFLAGS_FINAL 0x01 /* final chunk of a msg */
+#define UATH_CFLAGS_RXMSG 0x02 /* chunk contains rx completion */
+#define UATH_CFLAGS_DEBUG 0x04 /* for debugging */
+ __be16 length; /* chunk size in bytes */
+ /* chunk data follows */
+} __packed;
+
+/*
+ * Message format for a WDCMSG_DATA_AVAIL message from Target to Host.
+ */
+struct ar5523_rx_desc {
+ __be32 len; /* msg length including header */
+ __be32 code; /* WDCMSG_DATA_AVAIL */
+ __be32 gennum; /* generation number */
+ __be32 status; /* start of RECEIVE_INFO */
+#define UATH_STATUS_OK 0
+#define UATH_STATUS_STOP_IN_PROGRESS 1
+#define UATH_STATUS_CRC_ERR 2
+#define UATH_STATUS_PHY_ERR 3
+#define UATH_STATUS_DECRYPT_CRC_ERR 4
+#define UATH_STATUS_DECRYPT_MIC_ERR 5
+#define UATH_STATUS_DECOMP_ERR 6
+#define UATH_STATUS_KEY_ERR 7
+#define UATH_STATUS_ERR 8
+ __be32 tstamp_low; /* low-order 32-bits of rx timestamp */
+ __be32 tstamp_high; /* high-order 32-bits of rx timestamp */
+ __be32 framelen; /* frame length */
+ __be32 rate; /* rx rate code */
+ __be32 antenna;
+ __be32 rssi;
+ __be32 channel;
+ __be32 phyerror;
+ __be32 connix; /* key table ix for bss traffic */
+ __be32 decrypterror;
+ __be32 keycachemiss;
+ __be32 pad; /* XXX? */
+} __packed;
+
+struct ar5523_tx_desc {
+ __be32 msglen;
+ __be32 msgid; /* msg id (supplied by host) */
+ __be32 type; /* opcode: WDMSG_SEND or WDCMSG_FLUSH */
+ __be32 txqid; /* tx queue id and flags */
+#define UATH_TXQID_MASK 0x0f
+#define UATH_TXQID_MINRATE 0x10 /* use min tx rate */
+#define UATH_TXQID_FF 0x20 /* content is fast frame */
+ __be32 connid; /* tx connection id */
+#define UATH_ID_INVALID 0xffffffff /* for sending prior to connection */
+ __be32 flags; /* non-zero if response desired */
+#define UATH_TX_NOTIFY (1 << 24) /* f/w will send a UATH_NOTIF_TX */
+ __be32 buflen; /* payload length */
+} __packed;
+
+
+#define AR5523_ID_BSS 2
+#define AR5523_ID_BROADCAST 0xffffffff
+
+/* structure for command UATH_CMD_WRITE_MAC */
+struct ar5523_write_mac {
+ __be32 reg;
+ __be32 len;
+ u8 data[32];
+} __packed;
+
+struct ar5523_cmd_rateset {
+ __u8 length;
+#define AR5523_MAX_NRATES 32
+ __u8 set[AR5523_MAX_NRATES];
+};
+
+struct ar5523_cmd_set_associd { /* AR5523_WRITE_ASSOCID */
+ __be32 defaultrateix;
+ __be32 associd;
+ __be32 timoffset;
+ __be32 turboprime;
+ __u8 bssid[6];
+} __packed;
+
+/* structure for command WDCMSG_RESET */
+struct ar5523_cmd_reset {
+ __be32 flags; /* channel flags */
+#define UATH_CHAN_TURBO 0x0100
+#define UATH_CHAN_CCK 0x0200
+#define UATH_CHAN_OFDM 0x0400
+#define UATH_CHAN_2GHZ 0x1000
+#define UATH_CHAN_5GHZ 0x2000
+ __be32 freq; /* channel frequency */
+ __be32 maxrdpower;
+ __be32 cfgctl;
+ __be32 twiceantennareduction;
+ __be32 channelchange;
+ __be32 keeprccontent;
+} __packed;
+
+/* structure for command WDCMSG_SET_BASIC_RATE */
+struct ar5523_cmd_rates {
+ __be32 connid;
+ __be32 keeprccontent;
+ __be32 size;
+ struct ar5523_cmd_rateset rateset;
+} __packed;
+
+enum {
+ WLAN_MODE_NONE = 0,
+ WLAN_MODE_11b,
+ WLAN_MODE_11a,
+ WLAN_MODE_11g,
+ WLAN_MODE_11a_TURBO,
+ WLAN_MODE_11g_TURBO,
+ WLAN_MODE_11a_TURBO_PRIME,
+ WLAN_MODE_11g_TURBO_PRIME,
+ WLAN_MODE_11a_XR,
+ WLAN_MODE_11g_XR,
+};
+
+struct ar5523_cmd_connection_attr {
+ __be32 longpreambleonly;
+ struct ar5523_cmd_rateset rateset;
+ __be32 wlanmode;
+} __packed;
+
+/* structure for command AR5523_CREATE_CONNECTION */
+struct ar5523_cmd_create_connection {
+ __be32 connid;
+ __be32 bssid;
+ __be32 size;
+ struct ar5523_cmd_connection_attr connattr;
+} __packed;
+
+struct ar5523_cmd_ledsteady { /* WDCMSG_SET_LED_STEADY */
+ __be32 lednum;
+#define UATH_LED_LINK 0
+#define UATH_LED_ACTIVITY 1
+ __be32 ledmode;
+#define UATH_LED_OFF 0
+#define UATH_LED_ON 1
+} __packed;
+
+struct ar5523_cmd_ledblink { /* WDCMSG_SET_LED_BLINK */
+ __be32 lednum;
+ __be32 ledmode;
+ __be32 blinkrate;
+ __be32 slowmode;
+} __packed;
+
+struct ar5523_cmd_ledstate { /* WDCMSG_SET_LED_STATE */
+ __be32 connected;
+} __packed;
+
+struct ar5523_cmd_txq_attr {
+ __be32 priority;
+ __be32 aifs;
+ __be32 logcwmin;
+ __be32 logcwmax;
+ __be32 bursttime;
+ __be32 mode;
+ __be32 qflags;
+} __packed;
+
+struct ar5523_cmd_txq_setup { /* WDCMSG_SETUP_TX_QUEUE */
+ __be32 qid;
+ __be32 len;
+ struct ar5523_cmd_txq_attr attr;
+} __packed;
+
+struct ar5523_cmd_rx_filter { /* WDCMSG_RX_FILTER */
+ __be32 bits;
+#define UATH_FILTER_RX_UCAST 0x00000001
+#define UATH_FILTER_RX_MCAST 0x00000002
+#define UATH_FILTER_RX_BCAST 0x00000004
+#define UATH_FILTER_RX_CONTROL 0x00000008
+#define UATH_FILTER_RX_BEACON 0x00000010 /* beacon frames */
+#define UATH_FILTER_RX_PROM 0x00000020 /* promiscuous mode */
+#define UATH_FILTER_RX_PHY_ERR 0x00000040 /* phy errors */
+#define UATH_FILTER_RX_PHY_RADAR 0x00000080 /* radar phy errors */
+#define UATH_FILTER_RX_XR_POOL 0x00000400 /* XR group polls */
+#define UATH_FILTER_RX_PROBE_REQ 0x00000800
+ __be32 op;
+#define UATH_FILTER_OP_INIT 0x0
+#define UATH_FILTER_OP_SET 0x1
+#define UATH_FILTER_OP_CLEAR 0x2
+#define UATH_FILTER_OP_TEMP 0x3
+#define UATH_FILTER_OP_RESTORE 0x4
+} __packed;
+
+enum {
+ CFG_NONE, /* Sentinal to indicate "no config" */
+ CFG_REG_DOMAIN, /* Regulatory Domain */
+ CFG_RATE_CONTROL_ENABLE,
+ CFG_DEF_XMIT_DATA_RATE, /* NB: if rate control is not enabled */
+ CFG_HW_TX_RETRIES,
+ CFG_SW_TX_RETRIES,
+ CFG_SLOW_CLOCK_ENABLE,
+ CFG_COMP_PROC,
+ CFG_USER_RTS_THRESHOLD,
+ CFG_XR2NORM_RATE_THRESHOLD,
+ CFG_XRMODE_SWITCH_COUNT,
+ CFG_PROTECTION_TYPE,
+ CFG_BURST_SEQ_THRESHOLD,
+ CFG_ABOLT,
+ CFG_IQ_LOG_COUNT_MAX,
+ CFG_MODE_CTS,
+ CFG_WME_ENABLED,
+ CFG_GPRS_CBR_PERIOD,
+ CFG_SERVICE_TYPE,
+ /* MAC Address to use. Overrides EEPROM */
+ CFG_MAC_ADDR,
+ CFG_DEBUG_EAR,
+ CFG_INIT_REGS,
+ /* An ID for use in error & debug messages */
+ CFG_DEBUG_ID,
+ CFG_COMP_WIN_SZ,
+ CFG_DIVERSITY_CTL,
+ CFG_TP_SCALE,
+ CFG_TPC_HALF_DBM5,
+ CFG_TPC_HALF_DBM2,
+ CFG_OVERRD_TX_POWER,
+ CFG_USE_32KHZ_CLOCK,
+ CFG_GMODE_PROTECTION,
+ CFG_GMODE_PROTECT_RATE_INDEX,
+ CFG_GMODE_NON_ERP_PREAMBLE,
+ CFG_WDC_TRANSPORT_CHUNK_SIZE,
+};
+
+enum {
+ /* Sentinal to indicate "no capability" */
+ CAP_NONE,
+ CAP_ALL, /* ALL capabilities */
+ CAP_TARGET_VERSION,
+ CAP_TARGET_REVISION,
+ CAP_MAC_VERSION,
+ CAP_MAC_REVISION,
+ CAP_PHY_REVISION,
+ CAP_ANALOG_5GHz_REVISION,
+ CAP_ANALOG_2GHz_REVISION,
+ /* Target supports WDC message debug features */
+ CAP_DEBUG_WDCMSG_SUPPORT,
+
+ CAP_REG_DOMAIN,
+ CAP_COUNTRY_CODE,
+ CAP_REG_CAP_BITS,
+
+ CAP_WIRELESS_MODES,
+ CAP_CHAN_SPREAD_SUPPORT,
+ CAP_SLEEP_AFTER_BEACON_BROKEN,
+ CAP_COMPRESS_SUPPORT,
+ CAP_BURST_SUPPORT,
+ CAP_FAST_FRAMES_SUPPORT,
+ CAP_CHAP_TUNING_SUPPORT,
+ CAP_TURBOG_SUPPORT,
+ CAP_TURBO_PRIME_SUPPORT,
+ CAP_DEVICE_TYPE,
+ CAP_XR_SUPPORT,
+ CAP_WME_SUPPORT,
+ CAP_TOTAL_QUEUES,
+ CAP_CONNECTION_ID_MAX, /* Should absorb CAP_KEY_CACHE_SIZE */
+
+ CAP_LOW_5GHZ_CHAN,
+ CAP_HIGH_5GHZ_CHAN,
+ CAP_LOW_2GHZ_CHAN,
+ CAP_HIGH_2GHZ_CHAN,
+
+ CAP_MIC_AES_CCM,
+ CAP_MIC_CKIP,
+ CAP_MIC_TKIP,
+ CAP_MIC_TKIP_WME,
+ CAP_CIPHER_AES_CCM,
+ CAP_CIPHER_CKIP,
+ CAP_CIPHER_TKIP,
+
+ CAP_TWICE_ANTENNAGAIN_5G,
+ CAP_TWICE_ANTENNAGAIN_2G,
+};
+
+enum {
+ ST_NONE, /* Sentinal to indicate "no status" */
+ ST_ALL,
+ ST_SERVICE_TYPE,
+ ST_WLAN_MODE,
+ ST_FREQ,
+ ST_BAND,
+ ST_LAST_RSSI,
+ ST_PS_FRAMES_DROPPED,
+ ST_CACHED_DEF_ANT,
+ ST_COUNT_OTHER_RX_ANT,
+ ST_USE_FAST_DIVERSITY,
+ ST_MAC_ADDR,
+ ST_RX_GENERATION_NUM,
+ ST_TX_QUEUE_DEPTH,
+ ST_SERIAL_NUMBER,
+ ST_WDC_TRANSPORT_CHUNK_SIZE,
+};
+
+enum {
+ TARGET_DEVICE_AWAKE,
+ TARGET_DEVICE_SLEEP,
+ TARGET_DEVICE_PWRDN,
+ TARGET_DEVICE_PWRSAVE,
+ TARGET_DEVICE_SUSPEND,
+ TARGET_DEVICE_RESUME,
+};
+
+/* this is in net/ieee80211.h, but that conflicts with the mac80211 headers */
+#define IEEE80211_2ADDR_LEN 16
+
+#define AR5523_MIN_RXBUFSZ \
+ (((sizeof(__be32) + IEEE80211_2ADDR_LEN + \
+ sizeof(struct ar5523_rx_desc)) + 3) & ~3)
--
1.7.9.5
On Tuesday, October 16, 2012 09:29:25 PM Pontus Fuchs wrote:
> Some time ago I found an old USB wireless dongle in my drawer. I was
> surprised it wasn't supported in Linux. Google gave me an old
> unfinished driver created by Christoph Hellwig. Armed with some
> spare time and naivity I picked up where Christoph left in 2007 and
> now it's actually working pretty fine. It does not crash for me and
> throughput is decent.
>
> It's based on the FreeBSD driver, which in turn is based on the
> reverse engineered Windows driver, hence a very limited feature set.
> Not even HW crypto offload is supported. But at least there is a
> firmware which has a suitable license:
>
> http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/contrib/dev/uath/ar5523.bin.uu
>
> Changes v1 to v2:
>
> * Bugfix: Avoid % 512 transfer sizes on TX as the FW will hang.
Have you tried setting "urb->transfer_flags |= URB_ZERO_PACKET;"
to your outgoing urbs? This might fix the hang as well and you
don't need any ugly skb_put.
Regards,
Chr
On 10/16/2012 09:29 PM, Pontus Fuchs wrote:
> Some time ago I found an old USB wireless dongle in my drawer. I was
> surprised it wasn't supported in Linux. Google gave me an old
> unfinished driver created by Christoph Hellwig. Armed with some
> spare time and naivity I picked up where Christoph left in 2007 and
> now it's actually working pretty fine. It does not crash for me and
> throughput is decent.
>
> It's based on the FreeBSD driver, which in turn is based on the
> reverse engineered Windows driver, hence a very limited feature set.
> Not even HW crypto offload is supported. But at least there is a
> firmware which has a suitable license:
>
> http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/contrib/dev/uath/ar5523.bin.uu
>
> Changes v1 to v2:
>
> * Change to same license as ath9k as suggested by Luis.
Is changing the license so easy? Have you ask all contributers to the
GPL version of this driver, if they are fine with changing the license
especially Christoph Hellwig?
Hauke
>> Changes v1 to v2:
>>
>> * Change to same license as ath9k as suggested by Luis.
>
> Is changing the license so easy? Have you ask all contributers to the
> GPL version of this driver, if they are fine with changing the license
> especially Christoph Hellwig?
Yes. I hope so. A while ago I asked Christoph if he wanted to be
copyright holder under BSD or GPL and he said he was fine either way.
Christoph: Can you confirm still is still the case?
Cheers,
Pontus
On 2012-10-16 23:22, Christian Lamparter wrote:
>> Changes v1 to v2:
>>
>> * Bugfix: Avoid % 512 transfer sizes on TX as the FW will hang.
> Have you tried setting "urb->transfer_flags |= URB_ZERO_PACKET;"
> to your outgoing urbs? This might fix the hang as well and you
> don't need any ugly skb_put.
Thanks! Didn't know about this flag. Solved the problem!
Cheers,
Pontus
Header file containing structures and defines used by the ar5523
driver.
Signed-off-by: Pontus Fuchs <[email protected]>
---
drivers/net/wireless/ath/ar5523/ar5523.h | 155 ++++++++++++++++++++++++++++++
1 file changed, 155 insertions(+)
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523.h
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.h b/drivers/net/wireless/ath/ar5523/ar5523.h
new file mode 100644
index 0000000..46efbf3
--- /dev/null
+++ b/drivers/net/wireless/ath/ar5523/ar5523.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2006
+ * Damien Bergamini <[email protected]>
+ * Copyright (c) 2007
+ * Christoph Hellwig <[email protected]>
+ *
+ * Copyright (c) 2006 Sam Leffler, Errno Consulting
+ * Copyright (c) 2008-2009 Weongyo Jeong <[email protected]>
+ * Copyright (c) 2012 Pontus Fuchs <[email protected]>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#define AR5523_FLAG_PRE_FIRMWARE (1 << 0)
+#define AR5523_FLAG_ABG (1 << 1)
+
+#define AR5523_FIRMWARE_FILE "ar5523.bin"
+
+#define AR5523_CMD_TX_PIPE 0x01
+#define AR5523_DATA_TX_PIPE 0x02
+#define AR5523_CMD_RX_PIPE 0x81
+#define AR5523_DATA_RX_PIPE 0x82
+
+#define ar5523_cmd_tx_pipe(dev) \
+ usb_sndbulkpipe((dev), AR5523_CMD_TX_PIPE)
+#define ar5523_data_tx_pipe(dev) \
+ usb_sndbulkpipe((dev), AR5523_DATA_TX_PIPE)
+#define ar5523_cmd_rx_pipe(dev) \
+ usb_rcvbulkpipe((dev), AR5523_CMD_RX_PIPE)
+#define ar5523_data_rx_pipe(dev) \
+ usb_rcvbulkpipe((dev), AR5523_DATA_RX_PIPE)
+
+#define AR5523_DATA_TIMEOUT 10000
+#define AR5523_CMD_TIMEOUT 1000
+
+#define AR5523_TX_DATA_COUNT 8
+#define AR5523_TX_DATA_RESTART_COUNT 2
+#define AR5523_RX_DATA_COUNT 16
+#define AR5523_RX_DATA_REFILL_COUNT 8
+
+#define AR5523_CMD_ID 1
+#define AR5523_DATA_ID 2
+
+#define AR5523_TX_WD_TIMEOUT (HZ * 2)
+#define AR5523_FLUSH_TIMEOUT (HZ * 3)
+
+enum AR5523_flags {
+ AR5523_HW_UP,
+ AR5523_USB_DISCONNECTED,
+ AR5523_CONNECTED
+};
+
+struct ar5523_tx_cmd {
+ struct ar5523 *ar;
+ struct urb *urb_tx;
+ void *buf_tx;
+ void *odata;
+ int olen;
+ int flags;
+ int res;
+ struct completion done;
+};
+
+/* This struct is placed in tx_info->driver_data. It must not be larger
+ * than IEEE80211_TX_INFO_DRIVER_DATA_SIZE.
+ */
+struct ar5523_tx_data {
+ struct list_head list;
+ struct ar5523 *ar;
+ struct sk_buff *skb;
+ struct urb *urb;
+};
+
+struct ar5523_rx_data {
+ struct list_head list;
+ struct ar5523 *ar;
+ struct urb *urb;
+ struct sk_buff *skb;
+};
+
+struct ar5523 {
+ struct usb_device *dev;
+ struct ieee80211_hw *hw;
+
+ unsigned long flags;
+ struct mutex mutex;
+ struct workqueue_struct *wq;
+
+ struct ar5523_tx_cmd tx_cmd;
+
+ struct delayed_work stat_work;
+
+ struct timer_list tx_wd_timer;
+ struct work_struct tx_wd_work;
+ struct work_struct tx_work;
+ struct list_head tx_queue_pending;
+ struct list_head tx_queue_submitted;
+ spinlock_t tx_data_list_lock;
+ wait_queue_head_t tx_flush_waitq;
+
+ /* Queued + Submitted TX frames */
+ atomic_t tx_nr_total;
+
+ /* Submitted TX frames */
+ atomic_t tx_nr_pending;
+
+ void *rx_cmd_buf;
+ struct urb *rx_cmd_urb;
+
+ struct ar5523_rx_data rx_data[AR5523_RX_DATA_COUNT];
+ spinlock_t rx_data_list_lock;
+ struct list_head rx_data_free;
+ struct list_head rx_data_used;
+ atomic_t rx_data_free_cnt;
+
+ struct work_struct rx_refill_work;
+
+ int rxbufsz;
+ u8 serial[16];
+
+ struct ieee80211_channel channels[14];
+ struct ieee80211_rate rates[12];
+ struct ieee80211_supported_band band;
+ struct ieee80211_vif *vif;
+};
+
+/* flags for sending firmware commands */
+#define AR5523_CMD_FLAG_READ (1 << 1)
+#define AR5523_CMD_FLAG_MAGIC (1 << 2)
+
+#define ar5523_dbg(ar, format, arg...) \
+ dev_dbg(&(ar)->dev->dev, format, ## arg)
+
+/* On USB hot-unplug there can be a lot of URBs in flight and they'll all
+ * fail. Instead of dealing with them in every possible place just surpress
+ * any messages on USB disconnect.
+ */
+#define ar5523_err(ar, format, arg...) \
+do { \
+ if (!test_bit(AR5523_USB_DISCONNECTED, &ar->flags)) { \
+ dev_err(&(ar)->dev->dev, format, ## arg); \
+ } \
+} while (0)
+#define ar5523_info(ar, format, arg...) \
+ dev_info(&(ar)->dev->dev, format, ## arg)
--
1.7.9.5
Hook into the build system so driver can be built.
Signed-off-by: Pontus Fuchs <[email protected]>
---
MAINTAINERS | 6 ++++++
drivers/net/wireless/ath/Kconfig | 1 +
drivers/net/wireless/ath/Makefile | 1 +
drivers/net/wireless/ath/ar5523/Kconfig | 7 +++++++
drivers/net/wireless/ath/ar5523/Makefile | 1 +
5 files changed, 16 insertions(+)
create mode 100644 drivers/net/wireless/ath/ar5523/Kconfig
create mode 100644 drivers/net/wireless/ath/ar5523/Makefile
diff --git a/MAINTAINERS b/MAINTAINERS
index e73060f..43fb811 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7477,6 +7477,12 @@ S: Maintained
F: Documentation/usb/acm.txt
F: drivers/usb/class/cdc-acm.*
+USB AR5523 WIRELESS DRIVER
+M: Pontus Fuchs <[email protected]>
+L: [email protected]
+S: Maintained
+F: drivers/net/wireless/ar5523/
+
USB ATTACHED SCSI
M: Matthew Wilcox <[email protected]>
M: Sarah Sharp <[email protected]>
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 0960224..c25dcf1 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -26,5 +26,6 @@ source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
source "drivers/net/wireless/ath/carl9170/Kconfig"
source "drivers/net/wireless/ath/ath6kl/Kconfig"
+source "drivers/net/wireless/ath/ar5523/Kconfig"
endif
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
index d716b74..1e18621 100644
--- a/drivers/net/wireless/ath/Makefile
+++ b/drivers/net/wireless/ath/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_ATH5K) += ath5k/
obj-$(CONFIG_ATH9K_HW) += ath9k/
obj-$(CONFIG_CARL9170) += carl9170/
obj-$(CONFIG_ATH6KL) += ath6kl/
+obj-$(CONFIG_AR5523) += ar5523/
obj-$(CONFIG_ATH_COMMON) += ath.o
diff --git a/drivers/net/wireless/ath/ar5523/Kconfig b/drivers/net/wireless/ath/ar5523/Kconfig
new file mode 100644
index 0000000..11d99ee
--- /dev/null
+++ b/drivers/net/wireless/ath/ar5523/Kconfig
@@ -0,0 +1,7 @@
+config AR5523
+ tristate "Atheros AR5523 wireless driver support"
+ depends on MAC80211 && USB
+ select FW_LOADER
+ ---help---
+ This module add support for AR5523 based USB dongles such as D-Link
+ DWL-G132, Netgear WPN111 and many more.
diff --git a/drivers/net/wireless/ath/ar5523/Makefile b/drivers/net/wireless/ath/ar5523/Makefile
new file mode 100644
index 0000000..ebf7f3b
--- /dev/null
+++ b/drivers/net/wireless/ath/ar5523/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_AR5523) := ar5523.o
--
1.7.9.5
This driver is for the AR5523 chipset from Atheros. It was created
in 2007 by Christoph Hellwig but it was never finished. I found it a
couple of months ago and after some polishing it's working pretty
fine.
The driver was written with the FreeBSD driver (uath) as reference,
which was written with the reverse-engineered windows driver as
reference, hence the feature set is very limited. Station mode
only, no HW crypto offload.
Signed-off-by: Pontus Fuchs <[email protected]>
---
drivers/net/wireless/ath/ar5523/ar5523.c | 1816 ++++++++++++++++++++++++++++++
1 file changed, 1816 insertions(+)
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523.c
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
new file mode 100644
index 0000000..71e9ed0
--- /dev/null
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -0,0 +1,1816 @@
+/*
+ * Copyright (c) 2006
+ * Damien Bergamini <[email protected]>
+ * Copyright (c) 2007
+ * Christoph Hellwig <[email protected]>
+ *
+ * Copyright (c) 2006 Sam Leffler, Errno Consulting
+ * Copyright (c) 2008-2009 Weongyo Jeong <[email protected]>
+ * Copyright (c) 2012 Pontus Fuchs <[email protected]>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * This driver is based on the uath driver written by Damien Bergamini for
+ * OpenBSD, who did black-box analysis of the Windows binary driver to find
+ * out how the hardware works. It contains a lot magic numbers because of
+ * that and only has minimal functionality.
+ */
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/completion.h>
+#include <linux/firmware.h>
+#include <linux/skbuff.h>
+#include <linux/usb.h>
+#include <net/mac80211.h>
+
+#include "ar5523.h"
+#include "ar5523_hw.h"
+
+/*
+ * Various supported device vendors/products.
+ * UB51: AR5005UG 802.11b/g, UB52: AR5005UX 802.11a/b/g
+ */
+
+static int ar5523_submit_rx_cmd(struct ar5523 *ar);
+static void ar5523_data_tx_pkt_put(struct ar5523 *ar);
+
+static void ar5523_read_reply(struct ar5523 *ar, struct ar5523_cmd_hdr *hdr,
+ struct ar5523_tx_cmd *cmd)
+{
+ int dlen, olen;
+ u32 *rp;
+
+ dlen = hdr->len - sizeof(*hdr);
+
+ if (dlen < 0) {
+ WARN_ON(1);
+ goto out;
+ }
+
+ ar5523_dbg(ar, "Code = %d len = %d\n", hdr->code & 0xff, dlen);
+
+ rp = (u32 *)(hdr + 1);
+ if (dlen >= sizeof(u32)) {
+ olen = be32_to_cpu(rp[0]);
+ dlen -= sizeof(u32);
+ if (olen == 0) {
+ /* convention is 0 =>'s one word */
+ olen = sizeof(u32);
+ }
+ } else
+ olen = 0;
+
+ if (cmd->odata) {
+ if (cmd->olen < olen) {
+ ar5523_err(ar, "olen to small %d < %d\n",
+ cmd->olen, olen);
+ cmd->olen = 0;
+ cmd->res = -EOVERFLOW;
+ } else {
+ cmd->olen = olen;
+ memcpy(cmd->odata, &rp[1], olen);
+ cmd->res = 0;
+ }
+ }
+
+out:
+ complete(&cmd->done);
+}
+
+static void ar5523_cmd_rx_cb(struct urb *urb)
+{
+ struct ar5523 *ar = urb->context;
+ struct ar5523_tx_cmd *cmd = &ar->tx_cmd;
+ struct ar5523_cmd_hdr *hdr = ar->rx_cmd_buf;
+ int dlen;
+
+ if (urb->status) {
+ if (urb->status != -ESHUTDOWN)
+ ar5523_err(ar, "RX USB error %d.\n", urb->status);
+ goto skip;
+ }
+
+ if (urb->actual_length < sizeof(struct ar5523_cmd_hdr)) {
+ ar5523_err(ar, "RX USB to short.\n");
+ goto skip;
+ }
+
+ ar5523_dbg(ar, "%s code %02x priv %d\n", __func__,
+ be32_to_cpu(hdr->code) & 0xff, hdr->priv);
+
+ hdr->code = be32_to_cpu(hdr->code);
+ hdr->len = be32_to_cpu(hdr->len);
+
+ switch (hdr->code & 0xff) {
+ default:
+ /* reply to a read command */
+ if (hdr->priv != AR5523_CMD_ID) {
+ ar5523_err(ar, "Unexpected command id: %02x\n",
+ hdr->code & 0xff);
+ goto skip;
+ }
+ ar5523_read_reply(ar, hdr, cmd);
+ break;
+
+ case WDCMSG_DEVICE_AVAIL:
+ ar5523_dbg(ar, "WDCMSG_DEVICE_AVAIL\n");
+ cmd->res = 0;
+ cmd->olen = 0;
+ complete(&cmd->done);
+ break;
+
+ case WDCMSG_SEND_COMPLETE:
+ ar5523_dbg(ar, "WDCMSG_SEND_COMPLETE: %d pending\n",
+ atomic_read(&ar->tx_nr_pending));
+ if (!test_bit(AR5523_HW_UP, &ar->flags))
+ ar5523_dbg(ar, "Unexpected WDCMSG_SEND_COMPLETE\n");
+ else {
+ mod_timer(&ar->tx_wd_timer,
+ jiffies + AR5523_TX_WD_TIMEOUT);
+ ar5523_data_tx_pkt_put(ar);
+
+ }
+ break;
+
+ case WDCMSG_TARGET_START:
+ /* This command returns a bogus id so it needs special
+ handling */
+ dlen = hdr->len - sizeof(*hdr);
+ if (dlen != (int)sizeof(u32)) {
+ ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START");
+ return;
+ }
+ memcpy(cmd->odata, hdr + 1, sizeof(u32));
+ cmd->olen = sizeof(u32);
+ cmd->res = 0;
+ complete(&cmd->done);
+ break;
+
+ case WDCMSG_STATS_UPDATE:
+ ar5523_dbg(ar, "WDCMSG_STATS_UPDATE\n");
+ break;
+ }
+
+skip:
+ ar5523_submit_rx_cmd(ar);
+}
+
+static int ar5523_alloc_rx_cmd(struct ar5523 *ar)
+{
+ ar->rx_cmd_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ar->rx_cmd_urb)
+ return -ENOMEM;
+
+ ar->rx_cmd_buf = usb_alloc_coherent(ar->dev, AR5523_MAX_RXCMDSZ,
+ GFP_KERNEL,
+ &ar->rx_cmd_urb->transfer_dma);
+ if (!ar->rx_cmd_buf) {
+ usb_free_urb(ar->rx_cmd_urb);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void ar5523_cancel_rx_cmd(struct ar5523 *ar)
+{
+ usb_kill_urb(ar->rx_cmd_urb);
+}
+
+static void ar5523_free_rx_cmd(struct ar5523 *ar)
+{
+ usb_free_coherent(ar->dev, AR5523_MAX_RXCMDSZ,
+ ar->rx_cmd_buf, ar->rx_cmd_urb->transfer_dma);
+ usb_free_urb(ar->rx_cmd_urb);
+}
+
+static int ar5523_submit_rx_cmd(struct ar5523 *ar)
+{
+ int error;
+
+ usb_fill_bulk_urb(ar->rx_cmd_urb, ar->dev,
+ ar5523_cmd_rx_pipe(ar->dev), ar->rx_cmd_buf,
+ AR5523_MAX_RXCMDSZ, ar5523_cmd_rx_cb, ar);
+ ar->rx_cmd_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ error = usb_submit_urb(ar->rx_cmd_urb, GFP_ATOMIC);
+ if (error) {
+ if (error != -ENODEV)
+ ar5523_err(ar, "error %d when submitting rx urb\n",
+ error);
+ return error;
+ }
+ return 0;
+}
+
+/*
+ * Command submitted cb
+ */
+static void ar5523_cmd_tx_cb(struct urb *urb)
+{
+ struct ar5523_tx_cmd *cmd = urb->context;
+ struct ar5523 *ar = cmd->ar;
+
+ if (urb->status) {
+ ar5523_err(ar, "Failed to TX command. Status = %d\n",
+ urb->status);
+ cmd->res = urb->status;
+ complete(&cmd->done);
+ return;
+ }
+
+ if (!(cmd->flags & AR5523_CMD_FLAG_READ)) {
+ cmd->res = 0;
+ complete(&cmd->done);
+ }
+}
+
+static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata,
+ int ilen, void *odata, int olen, int flags)
+{
+ struct ar5523_cmd_hdr *hdr;
+ struct ar5523_tx_cmd *cmd = &ar->tx_cmd;
+ int xferlen, error;
+
+ /* always bulk-out a multiple of 4 bytes */
+ xferlen = (sizeof(struct ar5523_cmd_hdr) + ilen + 3) & ~3;
+
+ hdr = (struct ar5523_cmd_hdr *)cmd->buf_tx;
+ memset(hdr, 0, sizeof(struct ar5523_cmd_hdr));
+ hdr->len = cpu_to_be32(xferlen);
+ hdr->code = cpu_to_be32(code);
+ hdr->priv = AR5523_CMD_ID;
+
+ if (flags & AR5523_CMD_FLAG_MAGIC)
+ hdr->magic = cpu_to_be32(1 << 24);
+ memcpy(hdr + 1, idata, ilen);
+
+ cmd->odata = odata;
+ cmd->olen = olen;
+ cmd->flags = flags;
+
+ ar5523_dbg(ar, "do cmd %02x\n", code);
+
+ usb_fill_bulk_urb(cmd->urb_tx, ar->dev, ar5523_cmd_tx_pipe(ar->dev),
+ cmd->buf_tx, xferlen, ar5523_cmd_tx_cb, cmd);
+ cmd->urb_tx->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ error = usb_submit_urb(cmd->urb_tx, GFP_KERNEL);
+ if (error) {
+ ar5523_err(ar, "could not send command 0x%x, error=%d\n",
+ code, error);
+ return error;
+ }
+
+ if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) {
+ cmd->odata = NULL;
+ ar5523_err(ar, "timeout waiting for command %02x reply\n",
+ code);
+ cmd->res = -ETIMEDOUT;
+ }
+ return cmd->res;
+}
+
+static int ar5523_cmd_write(struct ar5523 *ar, u32 code, const void *data,
+ int len, int flags)
+{
+ flags &= ~AR5523_CMD_FLAG_READ;
+ return ar5523_cmd(ar, code, data, len, NULL, 0, flags);
+}
+
+static int ar5523_cmd_read(struct ar5523 *ar, u32 code, const void *idata,
+ int ilen, void *odata, int olen, int flags)
+{
+ flags |= AR5523_CMD_FLAG_READ;
+ return ar5523_cmd(ar, code, idata, ilen, odata, olen, flags);
+}
+
+static int ar5523_config(struct ar5523 *ar, u32 reg, u32 val)
+{
+ struct ar5523_write_mac write;
+ int error;
+
+ write.reg = cpu_to_be32(reg);
+ write.len = cpu_to_be32(0); /* 0 = single write */
+ *(u32 *)write.data = cpu_to_be32(val);
+
+ error = ar5523_cmd_write(ar, WDCMSG_TARGET_SET_CONFIG, &write,
+ 3 * sizeof(u32), 0);
+ if (error != 0)
+ ar5523_err(ar, "could not write register 0x%02x\n", reg);
+ return error;
+}
+
+static int ar5523_config_multi(struct ar5523 *ar, u32 reg, const void *data,
+ int len)
+{
+ struct ar5523_write_mac write;
+ int error;
+
+ write.reg = cpu_to_be32(reg);
+ write.len = cpu_to_be32(len);
+ memcpy(write.data, data, len);
+
+ /* properly handle the case where len is zero (reset) */
+ error = ar5523_cmd_write(ar, WDCMSG_TARGET_SET_CONFIG, &write,
+ (len == 0) ? sizeof(u32) : 2 * sizeof(u32) + len, 0);
+ if (error != 0)
+ ar5523_err(ar, "could not write %d bytes to register 0x%02x\n",
+ len, reg);
+ return error;
+}
+
+static int ar5523_get_status(struct ar5523 *ar, u32 which, void *odata,
+ int olen)
+{
+ int error;
+
+ which = cpu_to_be32(which);
+ error = ar5523_cmd_read(ar, WDCMSG_TARGET_GET_STATUS,
+ &which, sizeof(which), odata, olen, AR5523_CMD_FLAG_MAGIC);
+ if (error != 0)
+ ar5523_err(ar, "could not read EEPROM offset 0x%02x\n",
+ be32_to_cpu(which));
+ return error;
+}
+
+static int ar5523_get_capability(struct ar5523 *ar, u32 cap, u32 *val)
+{
+ int error;
+
+ cap = cpu_to_be32(cap);
+ error = ar5523_cmd_read(ar, WDCMSG_TARGET_GET_CAPABILITY,
+ &cap, sizeof(cap), val, sizeof(u32), AR5523_CMD_FLAG_MAGIC);
+ if (error != 0) {
+ ar5523_err(ar, "could not read capability %u\n",
+ be32_to_cpu(cap));
+ return error;
+ }
+ *val = be32_to_cpu(*val);
+ return error;
+}
+
+static int ar5523_get_devcap(struct ar5523 *ar)
+{
+#define GETCAP(x) do { \
+ error = ar5523_get_capability(ar, x, &cap); \
+ if (error != 0) \
+ return error; \
+ ar5523_info(ar, "Cap: " \
+ "%s=0x%08x\n", #x, cap); \
+} while (0)
+ int error;
+ u32 cap;
+
+ /* collect device capabilities */
+ GETCAP(CAP_TARGET_VERSION);
+ GETCAP(CAP_TARGET_REVISION);
+ GETCAP(CAP_MAC_VERSION);
+ GETCAP(CAP_MAC_REVISION);
+ GETCAP(CAP_PHY_REVISION);
+ GETCAP(CAP_ANALOG_5GHz_REVISION);
+ GETCAP(CAP_ANALOG_2GHz_REVISION);
+
+ GETCAP(CAP_REG_DOMAIN);
+ GETCAP(CAP_REG_CAP_BITS);
+ GETCAP(CAP_WIRELESS_MODES);
+ GETCAP(CAP_CHAN_SPREAD_SUPPORT);
+ GETCAP(CAP_COMPRESS_SUPPORT);
+ GETCAP(CAP_BURST_SUPPORT);
+ GETCAP(CAP_FAST_FRAMES_SUPPORT);
+ GETCAP(CAP_CHAP_TUNING_SUPPORT);
+ GETCAP(CAP_TURBOG_SUPPORT);
+ GETCAP(CAP_TURBO_PRIME_SUPPORT);
+ GETCAP(CAP_DEVICE_TYPE);
+ GETCAP(CAP_WME_SUPPORT);
+ GETCAP(CAP_TOTAL_QUEUES);
+ GETCAP(CAP_CONNECTION_ID_MAX);
+
+ GETCAP(CAP_LOW_5GHZ_CHAN);
+ GETCAP(CAP_HIGH_5GHZ_CHAN);
+ GETCAP(CAP_LOW_2GHZ_CHAN);
+ GETCAP(CAP_HIGH_2GHZ_CHAN);
+ GETCAP(CAP_TWICE_ANTENNAGAIN_5G);
+ GETCAP(CAP_TWICE_ANTENNAGAIN_2G);
+
+ GETCAP(CAP_CIPHER_AES_CCM);
+ GETCAP(CAP_CIPHER_TKIP);
+ GETCAP(CAP_MIC_TKIP);
+ return 0;
+}
+
+static int ar5523_set_ledsteady(struct ar5523 *ar, int lednum, int ledmode)
+{
+ struct ar5523_cmd_ledsteady led;
+
+ led.lednum = cpu_to_be32(lednum);
+ led.ledmode = cpu_to_be32(ledmode);
+
+ ar5523_dbg(ar, "set %s led %s (steady)\n",
+ (lednum == UATH_LED_LINK) ? "link" : "activity",
+ ledmode ? "on" : "off");
+ return ar5523_cmd_write(ar, WDCMSG_SET_LED_STEADY, &led, sizeof(led),
+ 0);
+}
+
+static int ar5523_set_rxfilter(struct ar5523 *ar, u32 bits, u32 op)
+{
+ struct ar5523_cmd_rx_filter rxfilter;
+
+ rxfilter.bits = cpu_to_be32(bits);
+ rxfilter.op = cpu_to_be32(op);
+
+ ar5523_dbg(ar, "setting Rx filter=0x%x flags=0x%x\n", bits, op);
+ return ar5523_cmd_write(ar, WDCMSG_RX_FILTER, &rxfilter,
+ sizeof(rxfilter), 0);
+}
+
+static int ar5523_reset_tx_queues(struct ar5523 *ar)
+{
+ __be32 qid = cpu_to_be32(0);
+
+ ar5523_dbg(ar, "resetting Tx queue\n");
+ return ar5523_cmd_write(ar, WDCMSG_RELEASE_TX_QUEUE,
+ &qid, sizeof(qid), 0);
+}
+
+static int ar5523_set_chan(struct ar5523 *ar)
+{
+ struct ieee80211_conf *conf = &ar->hw->conf;
+
+ struct ar5523_cmd_reset reset;
+
+ memset(&reset, 0, sizeof(reset));
+ reset.flags |= cpu_to_be32(UATH_CHAN_2GHZ);
+ reset.flags |= cpu_to_be32(UATH_CHAN_OFDM);
+ reset.freq = cpu_to_be32(conf->channel->center_freq);
+ reset.maxrdpower = cpu_to_be32(50); /* XXX */
+ reset.channelchange = cpu_to_be32(1);
+ reset.keeprccontent = cpu_to_be32(0);
+
+ ar5523_dbg(ar, "set chan flags 0x%x freq %d\n",
+ be32_to_cpu(reset.flags),
+ conf->channel->center_freq);
+ return ar5523_cmd_write(ar, WDCMSG_RESET, &reset, sizeof(reset), 0);
+}
+
+static int ar5523_queue_init(struct ar5523 *ar)
+{
+ struct ar5523_cmd_txq_setup qinfo;
+
+ ar5523_dbg(ar, "setting up Tx queue\n");
+ qinfo.qid = cpu_to_be32(0);
+ qinfo.len = cpu_to_be32(sizeof(qinfo.attr));
+ qinfo.attr.priority = cpu_to_be32(0); /* XXX */
+ qinfo.attr.aifs = cpu_to_be32(3);
+ qinfo.attr.logcwmin = cpu_to_be32(4);
+ qinfo.attr.logcwmax = cpu_to_be32(10);
+ qinfo.attr.bursttime = cpu_to_be32(0);
+ qinfo.attr.mode = cpu_to_be32(0);
+ qinfo.attr.qflags = cpu_to_be32(1); /* XXX? */
+ return ar5523_cmd_write(ar, WDCMSG_SETUP_TX_QUEUE, &qinfo,
+ sizeof(qinfo), 0);
+}
+
+static int ar5523_switch_chan(struct ar5523 *ar)
+{
+ int error;
+
+ error = ar5523_set_chan(ar);
+ if (error) {
+ ar5523_err(ar, "could not set chan, error %d\n", error);
+ goto out_err;
+ }
+
+ /* reset Tx rings */
+ error = ar5523_reset_tx_queues(ar);
+ if (error) {
+ ar5523_err(ar, "could not reset Tx queues, error %d\n",
+ error);
+ goto out_err;
+ }
+ /* set Tx rings WME properties */
+ error = ar5523_queue_init(ar);
+ if (error)
+ ar5523_err(ar, "could not init wme, error %d\n", error);
+
+out_err:
+ return error;
+}
+
+static void ar5523_rx_data_put(struct ar5523 *ar,
+ struct ar5523_rx_data *data)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&ar->rx_data_list_lock, flags);
+ list_move(&data->list, &ar->rx_data_free);
+ spin_unlock_irqrestore(&ar->rx_data_list_lock, flags);
+}
+
+static void ar5523_data_rx_cb(struct urb *urb)
+{
+ struct ar5523_rx_data *data = urb->context;
+ struct ar5523 *ar = data->ar;
+ struct ar5523_rx_desc *desc;
+ struct ar5523_chunk *chunk;
+ struct ieee80211_hw *hw = ar->hw;
+ struct ieee80211_rx_status *rx_status;
+ u32 rxlen;
+ int usblen = urb->actual_length;
+ int hdrlen, pad;
+
+ ar5523_dbg(ar, "%s\n", __func__);
+ /* sync/async unlink faults aren't errors */
+ if (urb->status) {
+ if (urb->status != -ESHUTDOWN)
+ ar5523_err(ar, "%s: USB err: %d\n", __func__,
+ urb->status);
+ goto skip;
+ }
+
+ if (usblen < AR5523_MIN_RXBUFSZ) {
+ ar5523_err(ar, "RX: wrong xfer size (usblen=%d)\n", usblen);
+ goto skip;
+ }
+
+ chunk = (struct ar5523_chunk *) data->skb->data;
+
+ if (((chunk->flags & UATH_CFLAGS_FINAL) == 0) ||
+ chunk->seqnum != 0) {
+ ar5523_dbg(ar, "RX: No final flag. s: %d f: %02x l: %d\n",
+ chunk->seqnum, chunk->flags,
+ be16_to_cpu(chunk->length));
+ goto skip;
+ }
+
+ /* Rx descriptor is located at the end, 32-bit aligned */
+ desc = (struct ar5523_rx_desc *)
+ (data->skb->data + usblen - sizeof(struct ar5523_rx_desc));
+
+ rxlen = be32_to_cpu(desc->len);
+ if (rxlen > ar->rxbufsz) {
+ ar5523_dbg(ar, "RX: Bad descriptor (len=%d)\n",
+ be32_to_cpu(desc->len));
+ goto skip;
+ }
+
+ if (!rxlen) {
+ ar5523_dbg(ar, "RX: rxlen is 0\n");
+ goto skip;
+ }
+
+ if (be32_to_cpu(desc->status) != 0) {
+ ar5523_dbg(ar, "Bad RX status (0x%x len = %d). Skip\n",
+ be32_to_cpu(desc->status), be32_to_cpu(desc->len));
+ goto skip;
+ }
+
+ skb_reserve(data->skb, sizeof(*chunk));
+ skb_put(data->skb, rxlen - sizeof(struct ar5523_rx_desc));
+
+ hdrlen = ieee80211_get_hdrlen_from_skb(data->skb);
+ if (!IS_ALIGNED(hdrlen, 4)) {
+ ar5523_dbg(ar, "eek, alignment workaround activated\n");
+ pad = ALIGN(hdrlen, 4) - hdrlen;
+ memmove(data->skb->data + pad, data->skb->data, hdrlen);
+ skb_pull(data->skb, pad);
+ skb_put(data->skb, pad);
+ }
+
+ rx_status = IEEE80211_SKB_RXCB(data->skb);
+ memset(rx_status, 0, sizeof(*rx_status));
+ rx_status->freq = be32_to_cpu(desc->channel);
+ rx_status->band = hw->conf.channel->band;
+ rx_status->signal = -95 + be32_to_cpu(desc->rssi);
+
+ ieee80211_rx_irqsafe(hw, data->skb);
+ data->skb = NULL;
+
+skip:
+ if (data->skb) {
+ dev_kfree_skb_irq(data->skb);
+ data->skb = NULL;
+ }
+
+ ar5523_rx_data_put(ar, data);
+ if (atomic_inc_return(&ar->rx_data_free_cnt) >=
+ AR5523_RX_DATA_REFILL_COUNT &&
+ test_bit(AR5523_HW_UP, &ar->flags))
+ queue_work(ar->wq, &ar->rx_refill_work);
+}
+
+static void ar5523_rx_refill_work(struct work_struct *work)
+{
+ struct ar5523 *ar = container_of(work, struct ar5523, rx_refill_work);
+ struct ar5523_rx_data *data;
+ unsigned long flags;
+ int error;
+
+ ar5523_dbg(ar, "%s\n", __func__);
+ do {
+ spin_lock_irqsave(&ar->rx_data_list_lock, flags);
+
+ if (!list_empty(&ar->rx_data_free))
+ data = (struct ar5523_rx_data *) ar->rx_data_free.next;
+ else
+ data = NULL;
+ spin_unlock_irqrestore(&ar->rx_data_list_lock, flags);
+
+ if (!data)
+ goto done;
+
+ data->skb = alloc_skb(ar->rxbufsz, GFP_KERNEL);
+ if (!data->skb) {
+ ar5523_err(ar, "could not allocate rx skbuff\n");
+ return;
+ }
+
+ usb_fill_bulk_urb(data->urb, ar->dev,
+ ar5523_data_rx_pipe(ar->dev), data->skb->data,
+ ar->rxbufsz, ar5523_data_rx_cb, data);
+
+ spin_lock_irqsave(&ar->rx_data_list_lock, flags);
+ list_move(&data->list, &ar->rx_data_used);
+ spin_unlock_irqrestore(&ar->rx_data_list_lock, flags);
+ atomic_dec(&ar->rx_data_free_cnt);
+
+ error = usb_submit_urb(data->urb, GFP_KERNEL);
+ if (error) {
+ kfree_skb(data->skb);
+ if (error != -ENODEV)
+ ar5523_err(ar, "Err sending rx data urb %d\n",
+ error);
+ ar5523_rx_data_put(ar, data);
+ atomic_inc(&ar->rx_data_free_cnt);
+ return;
+ }
+
+ } while (true);
+done:
+ return;
+}
+
+static void ar5523_cancel_rx_bufs(struct ar5523 *ar)
+{
+ struct ar5523_rx_data *data;
+ unsigned long flags;
+
+ do {
+ spin_lock_irqsave(&ar->rx_data_list_lock, flags);
+ if (!list_empty(&ar->rx_data_used))
+ data = (struct ar5523_rx_data *) ar->rx_data_used.next;
+ else
+ data = NULL;
+ spin_unlock_irqrestore(&ar->rx_data_list_lock, flags);
+
+ if (!data)
+ break;
+
+ usb_kill_urb(data->urb);
+ list_move(&data->list, &ar->rx_data_free);
+ atomic_inc(&ar->rx_data_free_cnt);
+ } while (data);
+}
+
+static void ar5523_free_rx_bufs(struct ar5523 *ar)
+{
+ struct ar5523_rx_data *data;
+
+ ar5523_cancel_rx_bufs(ar);
+ while (!list_empty(&ar->rx_data_free)) {
+ data = (struct ar5523_rx_data *) ar->rx_data_free.next;
+ list_del(&data->list);
+ usb_free_urb(data->urb);
+ }
+}
+
+static int ar5523_alloc_rx_bufs(struct ar5523 *ar)
+{
+ int i;
+
+ for (i = 0; i < AR5523_RX_DATA_COUNT; i++) {
+ struct ar5523_rx_data *data = &ar->rx_data[i];
+
+ data->ar = ar;
+ data->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!data->urb) {
+ ar5523_err(ar, "could not allocate rx data urb\n");
+ goto err;
+ }
+ list_add_tail(&data->list, &ar->rx_data_free);
+ atomic_inc(&ar->rx_data_free_cnt);
+ }
+ return 0;
+
+err:
+ ar5523_free_rx_bufs(ar);
+ return -ENOMEM;
+}
+
+static void ar5523_data_tx_pkt_put(struct ar5523 *ar)
+{
+ atomic_dec(&ar->tx_nr_total);
+ if (!atomic_dec_return(&ar->tx_nr_pending)) {
+ del_timer(&ar->tx_wd_timer);
+ wake_up(&ar->tx_flush_waitq);
+ }
+
+ if (atomic_read(&ar->tx_nr_total) < AR5523_TX_DATA_RESTART_COUNT) {
+ ar5523_dbg(ar, "restart tx queue\n");
+ ieee80211_wake_queues(ar->hw);
+ }
+}
+
+static void ar5523_data_tx_cb(struct urb *urb)
+{
+ struct sk_buff *skb = urb->context;
+ struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb);
+ struct ar5523_tx_data *data = (struct ar5523_tx_data *)
+ txi->driver_data;
+ struct ar5523 *ar = data->ar;
+ unsigned long flags;
+
+ ar5523_dbg(ar, "data tx urb completed: %d\n", urb->status);
+
+ spin_lock_irqsave(&ar->tx_data_list_lock, flags);
+ list_del(&data->list);
+ spin_unlock_irqrestore(&ar->tx_data_list_lock, flags);
+
+ if (urb->status) {
+ ar5523_dbg(ar, "%s: urb status: %d\n", __func__, urb->status);
+ ar5523_data_tx_pkt_put(ar);
+ ieee80211_free_txskb(ar->hw, skb);
+ } else {
+ skb_pull(skb, sizeof(struct ar5523_tx_desc) + sizeof(__be32));
+ ieee80211_tx_status_irqsafe(ar->hw, skb);
+ }
+ usb_free_urb(urb);
+}
+
+static void ar5523_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb);
+ struct ar5523_tx_data *data = (struct ar5523_tx_data *)
+ txi->driver_data;
+ struct ar5523 *ar = hw->priv;
+ unsigned long flags;
+
+ ar5523_dbg(ar, "tx called\n");
+ if (atomic_inc_return(&ar->tx_nr_total) >= AR5523_TX_DATA_COUNT) {
+ ar5523_dbg(ar, "tx queue full\n");
+ ar5523_dbg(ar, "stop queues (tot %d pend %d)\n",
+ atomic_read(&ar->tx_nr_total),
+ atomic_read(&ar->tx_nr_pending));
+ ieee80211_stop_queues(hw);
+ }
+
+ data->skb = skb;
+
+ spin_lock_irqsave(&ar->tx_data_list_lock, flags);
+ list_add_tail(&data->list, &ar->tx_queue_pending);
+ spin_unlock_irqrestore(&ar->tx_data_list_lock, flags);
+
+ ieee80211_queue_work(ar->hw, &ar->tx_work);
+}
+
+static void ar5523_tx_work_locked(struct ar5523 *ar)
+{
+ struct ar5523_tx_data *data;
+ struct ar5523_tx_desc *desc;
+ struct ar5523_chunk *chunk;
+ struct ieee80211_tx_info *txi;
+ struct urb *urb;
+ struct sk_buff *skb;
+ int error = 0, paylen;
+ u32 txqid;
+ unsigned long flags;
+
+ BUILD_BUG_ON(sizeof(struct ar5523_tx_data) >
+ IEEE80211_TX_INFO_DRIVER_DATA_SIZE);
+
+ ar5523_dbg(ar, "%s\n", __func__);
+ do {
+ spin_lock_irqsave(&ar->tx_data_list_lock, flags);
+ if (!list_empty(&ar->tx_queue_pending)) {
+ data = (struct ar5523_tx_data *)
+ ar->tx_queue_pending.next;
+ list_del(&data->list);
+ } else
+ data = NULL;
+ spin_unlock_irqrestore(&ar->tx_data_list_lock, flags);
+
+ if (!data)
+ break;
+
+ skb = data->skb;
+ txqid = 0;
+ txi = IEEE80211_SKB_CB(skb);
+ paylen = skb->len;
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ ar5523_err(ar, "Failed to allocate TX urb\n");
+ ieee80211_free_txskb(ar->hw, skb);
+ continue;
+ }
+
+ data->ar = ar;
+ data->urb = urb;
+
+ desc = (struct ar5523_tx_desc *)skb_push(skb, sizeof(*desc));
+ chunk = (struct ar5523_chunk *)skb_push(skb, sizeof(*chunk));
+
+ chunk->seqnum = 0;
+ chunk->flags = UATH_CFLAGS_FINAL;
+ chunk->length = cpu_to_be16(skb->len);
+
+ desc->msglen = cpu_to_be32(skb->len);
+ desc->msgid = AR5523_DATA_ID;
+ desc->buflen = cpu_to_be32(paylen);
+ desc->type = cpu_to_be32(WDCMSG_SEND);
+ desc->flags = cpu_to_be32(UATH_TX_NOTIFY);
+
+ if (test_bit(AR5523_CONNECTED, &ar->flags))
+ desc->connid = cpu_to_be32(AR5523_ID_BSS);
+ else
+ desc->connid = cpu_to_be32(AR5523_ID_BROADCAST);
+
+ if (txi->flags & IEEE80211_TX_CTL_USE_MINRATE)
+ txqid |= UATH_TXQID_MINRATE;
+
+ desc->txqid = cpu_to_be32(txqid);
+
+ /* If transfer size is a multiple of 512 bytes the FW's TX
+ * queues gets stuck. Am I missing something or is this a
+ * FW bug? Simply extending the transfer a few bytes solves
+ * the problem.
+ */
+ if (skb->len % 512 == 0)
+ skb_put(skb, 4);
+
+ usb_fill_bulk_urb(urb, ar->dev, ar5523_data_tx_pipe(ar->dev),
+ skb->data, skb->len, ar5523_data_tx_cb, skb);
+
+ spin_lock_irqsave(&ar->tx_data_list_lock, flags);
+ list_add_tail(&data->list, &ar->tx_queue_submitted);
+ spin_unlock_irqrestore(&ar->tx_data_list_lock, flags);
+ mod_timer(&ar->tx_wd_timer, jiffies + AR5523_TX_WD_TIMEOUT);
+ atomic_inc(&ar->tx_nr_pending);
+
+ ar5523_dbg(ar, "TX Frame (%d pending) size %d\n",
+ atomic_read(&ar->tx_nr_pending), skb->len);
+ error = usb_submit_urb(urb, GFP_KERNEL);
+ if (error) {
+ ar5523_err(ar, "error %d when submitting tx urb\n",
+ error);
+ spin_lock_irqsave(&ar->tx_data_list_lock, flags);
+ list_del(&data->list);
+ spin_unlock_irqrestore(&ar->tx_data_list_lock, flags);
+ atomic_dec(&ar->tx_nr_pending);
+ ar5523_data_tx_pkt_put(ar);
+ usb_free_urb(urb);
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+ } while (true);
+}
+
+static void ar5523_tx_work(struct work_struct *work)
+{
+ struct ar5523 *ar = container_of(work, struct ar5523, tx_work);
+
+ ar5523_dbg(ar, "%s\n", __func__);
+ mutex_lock(&ar->mutex);
+ ar5523_tx_work_locked(ar);
+ mutex_unlock(&ar->mutex);
+}
+
+static void ar5523_tx_wd_timer(unsigned long arg)
+{
+ struct ar5523 *ar = (struct ar5523 *) arg;
+
+ ar5523_dbg(ar, "TX watchdog timer triggered\n");
+ ieee80211_queue_work(ar->hw, &ar->tx_wd_work);
+}
+
+static void ar5523_tx_wd_work(struct work_struct *work)
+{
+ struct ar5523 *ar = container_of(work, struct ar5523, tx_wd_work);
+
+ /* Occasionally the TX queues stop responding. The only way to
+ * recover seems to be to reset the dongle.
+ */
+
+ mutex_lock(&ar->mutex);
+ ar5523_err(ar, "TX queue stuck (tot %d pend %d)\n",
+ atomic_read(&ar->tx_nr_total),
+ atomic_read(&ar->tx_nr_pending));
+
+ ar5523_err(ar, "Will restart dongle.\n");
+ ar5523_cmd_write(ar, WDCMSG_TARGET_RESET, NULL, 0, 0);
+ mutex_unlock(&ar->mutex);
+}
+
+static void ar5523_flush_tx(struct ar5523 *ar)
+{
+ ar5523_tx_work_locked(ar);
+
+ /* Don't waste time trying to flush if USB is disconnected */
+ if (test_bit(AR5523_USB_DISCONNECTED, &ar->flags))
+ return;
+ if (!wait_event_timeout(ar->tx_flush_waitq,
+ !atomic_read(&ar->tx_nr_pending), AR5523_FLUSH_TIMEOUT))
+ ar5523_err(ar, "flush timeout (tot %d pend %d)\n",
+ atomic_read(&ar->tx_nr_total),
+ atomic_read(&ar->tx_nr_pending));
+}
+
+static void ar5523_free_tx_cmd(struct ar5523 *ar)
+{
+ struct ar5523_tx_cmd *cmd = &ar->tx_cmd;
+
+ usb_free_coherent(ar->dev, AR5523_MAX_RXCMDSZ, cmd->buf_tx,
+ cmd->urb_tx->transfer_dma);
+ usb_free_urb(cmd->urb_tx);
+}
+
+static int ar5523_alloc_tx_cmd(struct ar5523 *ar)
+{
+ struct ar5523_tx_cmd *cmd = &ar->tx_cmd;
+
+ cmd->ar = ar;
+ init_completion(&cmd->done);
+
+ cmd->urb_tx = usb_alloc_urb(0, GFP_KERNEL);
+ if (!cmd->urb_tx) {
+ ar5523_err(ar, "could not allocate urb\n");
+ return -ENOMEM;
+ }
+ cmd->buf_tx = usb_alloc_coherent(ar->dev, AR5523_MAX_TXCMDSZ,
+ GFP_KERNEL,
+ &cmd->urb_tx->transfer_dma);
+ if (!cmd->buf_tx) {
+ usb_free_urb(cmd->urb_tx);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/*
+ * This function is called periodically (every second) when associated to
+ * query device statistics.
+ */
+static void ar5523_stat_work(struct work_struct *work)
+{
+ struct ar5523 *ar = container_of(work, struct ar5523, stat_work.work);
+ int error;
+
+ ar5523_dbg(ar, "%s\n", __func__);
+ mutex_lock(&ar->mutex);
+
+ /*
+ * Send request for statistics asynchronously once a second. This
+ * seems to be important. Throughput is a lot better if this is done.
+ */
+ error = ar5523_cmd_write(ar, WDCMSG_TARGET_GET_STATS, NULL, 0, 0);
+ if (error)
+ ar5523_err(ar, "could not query stats, error %d\n", error);
+ mutex_unlock(&ar->mutex);
+ ieee80211_queue_delayed_work(ar->hw, &ar->stat_work, HZ);
+}
+
+/*
+ * Interface routines to the mac80211 stack.
+ */
+static int ar5523_start(struct ieee80211_hw *hw)
+{
+ struct ar5523 *ar = hw->priv;
+ int error;
+ __be32 val;
+
+ ar5523_dbg(ar, "start called\n");
+
+ mutex_lock(&ar->mutex);
+ val = cpu_to_be32(0);
+ ar5523_cmd_write(ar, WDCMSG_BIND, &val, sizeof(val), 0);
+
+ /* set MAC address */
+ ar5523_config_multi(ar, CFG_MAC_ADDR, &ar->hw->wiphy->perm_addr,
+ ETH_ALEN);
+
+ /* XXX honor net80211 state */
+ ar5523_config(ar, CFG_RATE_CONTROL_ENABLE, 0x00000001);
+ ar5523_config(ar, CFG_DIVERSITY_CTL, 0x00000001);
+ ar5523_config(ar, CFG_ABOLT, 0x0000003f);
+ ar5523_config(ar, CFG_WME_ENABLED, 0x00000000);
+
+ ar5523_config(ar, CFG_SERVICE_TYPE, 1);
+ ar5523_config(ar, CFG_TP_SCALE, 0x00000000);
+ ar5523_config(ar, CFG_TPC_HALF_DBM5, 0x0000003c);
+ ar5523_config(ar, CFG_TPC_HALF_DBM2, 0x0000003c);
+ ar5523_config(ar, CFG_OVERRD_TX_POWER, 0x00000000);
+ ar5523_config(ar, CFG_GMODE_PROTECTION, 0x00000000);
+ ar5523_config(ar, CFG_GMODE_PROTECT_RATE_INDEX, 0x00000003);
+ ar5523_config(ar, CFG_PROTECTION_TYPE, 0x00000000);
+ ar5523_config(ar, CFG_MODE_CTS, 0x00000002);
+
+ error = ar5523_cmd_read(ar, WDCMSG_TARGET_START, NULL, 0,
+ &val, sizeof(val), AR5523_CMD_FLAG_MAGIC);
+ if (error) {
+ ar5523_dbg(ar, "could not start target, error %d\n", error);
+ goto err;
+ }
+ ar5523_dbg(ar, "WDCMSG_TARGET_START returns handle: 0x%x\n",
+ be32_to_cpu(val));
+
+ ar5523_switch_chan(ar);
+
+ val = cpu_to_be32(TARGET_DEVICE_AWAKE);
+ ar5523_cmd_write(ar, WDCMSG_SET_PWR_MODE, &val, sizeof(val), 0);
+ /* XXX? check */
+ ar5523_cmd_write(ar, WDCMSG_RESET_KEY_CACHE, NULL, 0, 0);
+
+ set_bit(AR5523_HW_UP, &ar->flags);
+ queue_work(ar->wq, &ar->rx_refill_work);
+
+ /* enable Rx */
+ ar5523_set_rxfilter(ar, 0, UATH_FILTER_OP_INIT);
+ ar5523_set_rxfilter(ar,
+ UATH_FILTER_RX_UCAST | UATH_FILTER_RX_MCAST |
+ UATH_FILTER_RX_BCAST | UATH_FILTER_RX_BEACON,
+ UATH_FILTER_OP_SET);
+
+ ar5523_set_ledsteady(ar, UATH_LED_ACTIVITY, UATH_LED_ON);
+ ar5523_dbg(ar, "start OK\n");
+
+err:
+ mutex_unlock(&ar->mutex);
+ return error;
+}
+
+static void ar5523_stop(struct ieee80211_hw *hw)
+{
+ struct ar5523 *ar = hw->priv;
+
+ ar5523_dbg(ar, "stop called\n");
+
+ cancel_delayed_work_sync(&ar->stat_work);
+ mutex_lock(&ar->mutex);
+ clear_bit(AR5523_HW_UP, &ar->flags);
+
+ ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_OFF);
+ ar5523_set_ledsteady(ar, UATH_LED_ACTIVITY, UATH_LED_OFF);
+
+ ar5523_cmd_write(ar, WDCMSG_TARGET_STOP, NULL, 0, 0);
+
+ del_timer_sync(&ar->tx_wd_timer);
+ cancel_work_sync(&ar->tx_wd_work);
+ cancel_work_sync(&ar->rx_refill_work);
+ ar5523_cancel_rx_bufs(ar);
+ mutex_unlock(&ar->mutex);
+}
+
+static int ar5523_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct ar5523 *ar = hw->priv;
+ int ret;
+
+ ar5523_dbg(ar, "set_rts_threshold called\n");
+ mutex_lock(&ar->mutex);
+
+ ret = ar5523_config(ar, CFG_USER_RTS_THRESHOLD, value);
+
+ mutex_unlock(&ar->mutex);
+ return ret;
+}
+
+static void ar5523_flush(struct ieee80211_hw *hw, bool drop)
+{
+ struct ar5523 *ar = hw->priv;
+
+ ar5523_dbg(ar, "flush called\n");
+ ar5523_flush_tx(ar);
+}
+
+static int ar5523_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ar5523 *ar = hw->priv;
+
+ ar5523_dbg(ar, "add interface called\n");
+
+ if (ar->vif) {
+ ar5523_dbg(ar, "invalid add_interface\n");
+ return -EOPNOTSUPP;
+ }
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ ar->vif = vif;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static void ar5523_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ar5523 *ar = hw->priv;
+
+ ar5523_dbg(ar, "remove interface called\n");
+ ar->vif = NULL;
+}
+
+static int ar5523_hwconfig(struct ieee80211_hw *hw, u32 changed)
+{
+ struct ar5523 *ar = hw->priv;
+
+ ar5523_dbg(ar, "config called\n");
+ mutex_lock(&ar->mutex);
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ ar5523_dbg(ar, "Do channel switch\n");
+ ar5523_flush_tx(ar);
+ ar5523_switch_chan(ar);
+ }
+ mutex_unlock(&ar->mutex);
+ return 0;
+}
+
+static int ar5523_get_wlan_mode(struct ar5523 *ar,
+ struct ieee80211_bss_conf *bss_conf)
+{
+ struct ieee80211_supported_band *band;
+ int bit;
+ struct ieee80211_sta *sta;
+ u32 sta_rate_set;
+
+ band = ar->hw->wiphy->bands[ar->hw->conf.channel->band];
+ sta = ieee80211_find_sta(ar->vif, bss_conf->bssid);
+ if (!sta) {
+ ar5523_info(ar, "STA not found!\n");
+ return WLAN_MODE_11b;
+ }
+ sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band];
+
+ for (bit = 0; bit < band->n_bitrates; bit++) {
+ if (sta_rate_set & 1) {
+ int rate = band->bitrates[bit].bitrate;
+ switch (rate) {
+ case 60:
+ case 90:
+ case 120:
+ case 180:
+ case 240:
+ case 360:
+ case 480:
+ case 540:
+ return WLAN_MODE_11g;
+ }
+ }
+ sta_rate_set >>= 1;
+ }
+ return WLAN_MODE_11b;
+}
+
+static void ar5523_create_rateset(struct ar5523 *ar,
+ struct ieee80211_bss_conf *bss_conf,
+ struct ar5523_cmd_rateset *rs,
+ bool basic)
+{
+ struct ieee80211_supported_band *band;
+ struct ieee80211_sta *sta;
+ int bit, i = 0;
+ u32 sta_rate_set, basic_rate_set;
+
+ sta = ieee80211_find_sta(ar->vif, bss_conf->bssid);
+ basic_rate_set = bss_conf->basic_rates;
+ if (!sta) {
+ ar5523_info(ar, "STA not found. Cannot set rates\n");
+ sta_rate_set = bss_conf->basic_rates;
+ }
+ sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band];
+
+ ar5523_dbg(ar, "sta rate_set = %08x\n", sta_rate_set);
+
+ band = ar->hw->wiphy->bands[ar->hw->conf.channel->band];
+ for (bit = 0; bit < band->n_bitrates; bit++) {
+ BUG_ON(i >= AR5523_MAX_NRATES);
+ ar5523_dbg(ar, "Considering rate %d : %d\n",
+ band->bitrates[bit].hw_value, sta_rate_set & 1);
+ if (sta_rate_set & 1) {
+ rs->set[i] = band->bitrates[bit].hw_value;
+ if (basic_rate_set & 1 && basic)
+ rs->set[i] |= 0x80;
+ i++;
+ }
+ sta_rate_set >>= 1;
+ basic_rate_set >>= 1;
+ }
+
+ rs->length = i;
+}
+
+static int ar5523_set_basic_rates(struct ar5523 *ar,
+ struct ieee80211_bss_conf *bss)
+{
+ struct ar5523_cmd_rates rates;
+
+ memset(&rates, 0, sizeof(rates));
+ rates.connid = cpu_to_be32(2); /* XXX */
+ rates.size = cpu_to_be32(sizeof(struct ar5523_cmd_rateset));
+ ar5523_create_rateset(ar, bss, &rates.rateset, true);
+
+ return ar5523_cmd_write(ar, WDCMSG_SET_BASIC_RATE, &rates,
+ sizeof(rates), 0);
+}
+
+static int ar5523_create_connection(struct ar5523 *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss)
+{
+ struct ar5523_cmd_create_connection create;
+ int wlan_mode;
+
+ memset(&create, 0, sizeof(create));
+ create.connid = cpu_to_be32(2);
+ create.bssid = cpu_to_be32(0);
+ /* XXX packed or not? */
+ create.size = cpu_to_be32(sizeof(struct ar5523_cmd_rateset));
+
+ ar5523_create_rateset(ar, bss, &create.connattr.rateset, false);
+
+ wlan_mode = ar5523_get_wlan_mode(ar, bss);
+ create.connattr.wlanmode = cpu_to_be32(wlan_mode);
+
+ return ar5523_cmd_write(ar, WDCMSG_CREATE_CONNECTION, &create,
+ sizeof(create), 0);
+}
+
+static int ar5523_write_associd(struct ar5523 *ar,
+ struct ieee80211_bss_conf *bss)
+{
+ struct ar5523_cmd_set_associd associd;
+
+ memset(&associd, 0, sizeof(associd));
+ associd.defaultrateix = cpu_to_be32(0); /* XXX */
+ associd.associd = cpu_to_be32(bss->aid);
+ associd.timoffset = cpu_to_be32(0x3b); /* XXX */
+ memcpy(associd.bssid, bss->bssid, ETH_ALEN);
+ return ar5523_cmd_write(ar, WDCMSG_WRITE_ASSOCID, &associd,
+ sizeof(associd), 0);
+}
+
+static void ar5523_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss,
+ u32 changed)
+{
+ struct ar5523 *ar = hw->priv;
+ int error;
+
+ ar5523_dbg(ar, "bss_info_changed called\n");
+ mutex_lock(&ar->mutex);
+
+ if (!(changed & BSS_CHANGED_ASSOC))
+ goto out_unlock;
+
+ if (bss->assoc) {
+ error = ar5523_create_connection(ar, vif, bss);
+ if (error) {
+ ar5523_err(ar, "could not create connection\n");
+ goto out_unlock;
+ }
+
+ error = ar5523_set_basic_rates(ar, bss);
+ if (error) {
+ ar5523_err(ar, "could not set negotiated rate set\n");
+ goto out_unlock;
+ }
+
+ error = ar5523_write_associd(ar, bss);
+ if (error) {
+ ar5523_err(ar, "could not set association\n");
+ goto out_unlock;
+ }
+
+ /* turn link LED on */
+ ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_ON);
+ set_bit(AR5523_CONNECTED, &ar->flags);
+ ieee80211_queue_delayed_work(hw, &ar->stat_work, HZ);
+
+ } else {
+ cancel_delayed_work(&ar->stat_work);
+ clear_bit(AR5523_CONNECTED, &ar->flags);
+ ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_OFF);
+ }
+
+out_unlock:
+ mutex_unlock(&ar->mutex);
+
+}
+
+#define AR5523_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
+ FIF_ALLMULTI | \
+ FIF_FCSFAIL | \
+ FIF_OTHER_BSS)
+
+static void ar5523_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
+{
+ struct ar5523 *ar = hw->priv;
+ u32 filter = 0;
+
+ ar5523_dbg(ar, "configure_filter called\n");
+ mutex_lock(&ar->mutex);
+ ar5523_flush_tx(ar);
+
+ *total_flags &= AR5523_SUPPORTED_FILTERS;
+
+ /* The filters seems strange. UATH_FILTER_RX_BCAST and
+ * UATH_FILTER_RX_MCAST does not result in those frames being RXed.
+ * The only way I have found to get [mb]cast frames seems to be
+ * to set UATH_FILTER_RX_PROM. */
+ filter |= UATH_FILTER_RX_UCAST | UATH_FILTER_RX_MCAST |
+ UATH_FILTER_RX_BCAST | UATH_FILTER_RX_BEACON |
+ UATH_FILTER_RX_PROM;
+
+ ar5523_set_rxfilter(ar, 0, UATH_FILTER_OP_INIT);
+ ar5523_set_rxfilter(ar, filter, UATH_FILTER_OP_SET);
+
+ mutex_unlock(&ar->mutex);
+}
+
+static const struct ieee80211_ops ar5523_ops = {
+ .start = ar5523_start,
+ .stop = ar5523_stop,
+ .tx = ar5523_tx,
+ .set_rts_threshold = ar5523_set_rts_threshold,
+ .add_interface = ar5523_add_interface,
+ .remove_interface = ar5523_remove_interface,
+ .config = ar5523_hwconfig,
+ .bss_info_changed = ar5523_bss_info_changed,
+ .configure_filter = ar5523_configure_filter,
+ .flush = ar5523_flush,
+};
+
+static int ar5523_host_available(struct ar5523 *ar)
+{
+ struct ar5523_cmd_host_available setup;
+
+ /* inform target the host is available */
+ setup.sw_ver_major = cpu_to_be32(ATH_SW_VER_MAJOR);
+ setup.sw_ver_minor = cpu_to_be32(ATH_SW_VER_MINOR);
+ setup.sw_ver_patch = cpu_to_be32(ATH_SW_VER_PATCH);
+ setup.sw_ver_build = cpu_to_be32(ATH_SW_VER_BUILD);
+ return ar5523_cmd_read(ar, WDCMSG_HOST_AVAILABLE,
+ &setup, sizeof(setup), NULL, 0, 0);
+}
+
+static int ar5523_get_devstatus(struct ar5523 *ar)
+{
+ u8 macaddr[ETH_ALEN];
+ int error;
+
+ /* retrieve MAC address */
+ error = ar5523_get_status(ar, ST_MAC_ADDR, macaddr, ETH_ALEN);
+ if (error) {
+ ar5523_err(ar, "could not read MAC address\n");
+ return error;
+ }
+
+ SET_IEEE80211_PERM_ADDR(ar->hw, macaddr);
+
+ error = ar5523_get_status(ar, ST_SERIAL_NUMBER,
+ &ar->serial[0], sizeof(ar->serial));
+ if (error) {
+ ar5523_err(ar, "could not read device serial number\n");
+ return error;
+ }
+ return 0;
+}
+
+#define AR5523_SANE_RXBUFSZ 2000
+
+static int ar5523_get_max_rxsz(struct ar5523 *ar)
+{
+ int error;
+ __be32 rxsize;
+
+ /* Get max rx size */
+ error = ar5523_get_status(ar, ST_WDC_TRANSPORT_CHUNK_SIZE, &rxsize,
+ sizeof(rxsize));
+ if (error != 0) {
+ ar5523_err(ar, "could not read max RX size\n");
+ return error;
+ }
+
+ ar->rxbufsz = be32_to_cpu(rxsize);
+
+ if (!ar->rxbufsz || ar->rxbufsz > AR5523_SANE_RXBUFSZ) {
+ ar5523_err(ar, "Bad rxbufsz from device. Using %d instead\n",
+ AR5523_SANE_RXBUFSZ);
+ ar->rxbufsz = AR5523_SANE_RXBUFSZ;
+ }
+
+ ar5523_dbg(ar, "Max RX buf size: %d\n", ar->rxbufsz);
+ return 0;
+}
+
+/*
+ * This is copied from rtl818x, but we should probably move this
+ * to common code as in OpenBSD.
+ */
+static const struct ieee80211_rate ar5523_rates[] = {
+ { .bitrate = 10, .hw_value = 2, },
+ { .bitrate = 20, .hw_value = 4 },
+ { .bitrate = 55, .hw_value = 11, },
+ { .bitrate = 110, .hw_value = 22, },
+ { .bitrate = 60, .hw_value = 12, },
+ { .bitrate = 90, .hw_value = 18, },
+ { .bitrate = 120, .hw_value = 24, },
+ { .bitrate = 180, .hw_value = 36, },
+ { .bitrate = 240, .hw_value = 48, },
+ { .bitrate = 360, .hw_value = 72, },
+ { .bitrate = 480, .hw_value = 96, },
+ { .bitrate = 540, .hw_value = 108, },
+};
+
+static const struct ieee80211_channel ar5523_channels[] = {
+ { .center_freq = 2412 },
+ { .center_freq = 2417 },
+ { .center_freq = 2422 },
+ { .center_freq = 2427 },
+ { .center_freq = 2432 },
+ { .center_freq = 2437 },
+ { .center_freq = 2442 },
+ { .center_freq = 2447 },
+ { .center_freq = 2452 },
+ { .center_freq = 2457 },
+ { .center_freq = 2462 },
+ { .center_freq = 2467 },
+ { .center_freq = 2472 },
+ { .center_freq = 2484 },
+};
+
+static int ar5523_init_modes(struct ar5523 *ar)
+{
+ BUILD_BUG_ON(sizeof(ar->channels) != sizeof(ar5523_channels));
+ BUILD_BUG_ON(sizeof(ar->rates) != sizeof(ar5523_rates));
+
+ memcpy(ar->channels, ar5523_channels, sizeof(ar5523_channels));
+ memcpy(ar->rates, ar5523_rates, sizeof(ar5523_rates));
+
+ ar->band.band = IEEE80211_BAND_2GHZ;
+ ar->band.channels = ar->channels;
+ ar->band.n_channels = ARRAY_SIZE(ar5523_channels);
+ ar->band.bitrates = ar->rates;
+ ar->band.n_bitrates = ARRAY_SIZE(ar5523_rates);
+ ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &ar->band;
+ return 0;
+}
+
+/*
+ * Load the MIPS R4000 microcode into the device. Once the image is loaded,
+ * the device will detach itself from the bus and reattach later with a new
+ * product Id (a la ezusb).
+ */
+static int ar5523_load_firmware(struct usb_device *dev)
+{
+ struct ar5523_fwblock *txblock, *rxblock;
+ const struct firmware *fw;
+ void *fwbuf;
+ int len, offset;
+ int foolen; /* XXX(hch): handle short transfers */
+ int error = -ENXIO;
+
+ if (request_firmware(&fw, AR5523_FIRMWARE_FILE, &dev->dev)) {
+ dev_err(&dev->dev, "no firmware found: %s\n",
+ AR5523_FIRMWARE_FILE);
+ return -ENOENT;
+ }
+
+ txblock = kmalloc(sizeof(*txblock), GFP_KERNEL);
+ if (!txblock)
+ goto out;
+
+ rxblock = kmalloc(sizeof(*rxblock), GFP_KERNEL);
+ if (!rxblock)
+ goto out_free_txblock;
+
+ fwbuf = kmalloc(AR5523_MAX_FWBLOCK_SIZE, GFP_KERNEL);
+ if (!fwbuf)
+ goto out_free_rxblock;
+
+ memset(txblock, 0, sizeof(struct ar5523_fwblock));
+ txblock->flags = cpu_to_be32(AR5523_WRITE_BLOCK);
+ txblock->total = cpu_to_be32(fw->size);
+
+ offset = 0;
+ len = fw->size;
+ while (len > 0) {
+ int mlen = min(len, AR5523_MAX_FWBLOCK_SIZE);
+
+ txblock->remain = cpu_to_be32(len - mlen);
+ txblock->len = cpu_to_be32(mlen);
+
+ /* send firmware block meta-data */
+ error = usb_bulk_msg(dev, ar5523_cmd_tx_pipe(dev),
+ txblock, sizeof(*txblock), &foolen,
+ AR5523_CMD_TIMEOUT);
+ if (error) {
+ dev_err(&dev->dev,
+ "could not send firmware block info\n");
+ goto out_free_fwbuf;
+ }
+
+ /* send firmware block data */
+ memcpy(fwbuf, fw->data + offset, mlen);
+ error = usb_bulk_msg(dev, ar5523_data_tx_pipe(dev),
+ fwbuf, mlen, &foolen,
+ AR5523_DATA_TIMEOUT);
+ if (error) {
+ dev_err(&dev->dev,
+ "could not send firmware block data\n");
+ goto out_free_fwbuf;
+ }
+
+ /* wait for ack from firmware */
+ error = usb_bulk_msg(dev, ar5523_cmd_rx_pipe(dev),
+ rxblock, sizeof(*rxblock), &foolen,
+ AR5523_CMD_TIMEOUT);
+ if (error) {
+ dev_err(&dev->dev,
+ "could not read firmware answer\n");
+ goto out_free_fwbuf;
+ }
+
+ len -= mlen;
+ offset += mlen;
+ }
+
+ /*
+ * Set the error to -ENXIO to make sure we continue probing for
+ * a driver.
+ */
+ error = -ENXIO;
+
+ out_free_fwbuf:
+ kfree(fwbuf);
+ out_free_rxblock:
+ kfree(rxblock);
+ out_free_txblock:
+ kfree(txblock);
+ out:
+ release_firmware(fw);
+ return error;
+}
+
+static int ar5523_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct ieee80211_hw *hw;
+ struct ar5523 *ar;
+ int error = -ENOMEM;
+
+ /*
+ * Load firmware if the device requires it. This will return
+ * -ENXIO on success and we'll get called back afer the usb
+ * id changes to indicate that the firmware is present.
+ */
+ if (id->driver_info & AR5523_FLAG_PRE_FIRMWARE)
+ return ar5523_load_firmware(dev);
+
+
+ hw = ieee80211_alloc_hw(sizeof(*ar), &ar5523_ops);
+ if (!hw)
+ goto out;
+ SET_IEEE80211_DEV(hw, &intf->dev);
+
+ ar = hw->priv;
+ ar->hw = hw;
+ ar->dev = dev;
+ mutex_init(&ar->mutex);
+
+ INIT_DELAYED_WORK(&ar->stat_work, ar5523_stat_work);
+ init_timer(&ar->tx_wd_timer);
+ setup_timer(&ar->tx_wd_timer, ar5523_tx_wd_timer, (unsigned long) ar);
+ INIT_WORK(&ar->tx_wd_work, ar5523_tx_wd_work);
+ INIT_WORK(&ar->tx_work, ar5523_tx_work);
+ INIT_LIST_HEAD(&ar->tx_queue_pending);
+ INIT_LIST_HEAD(&ar->tx_queue_submitted);
+ spin_lock_init(&ar->tx_data_list_lock);
+ atomic_set(&ar->tx_nr_total, 0);
+ atomic_set(&ar->tx_nr_pending, 0);
+ init_waitqueue_head(&ar->tx_flush_waitq);
+
+ atomic_set(&ar->rx_data_free_cnt, 0);
+ INIT_WORK(&ar->rx_refill_work, ar5523_rx_refill_work);
+ INIT_LIST_HEAD(&ar->rx_data_free);
+ INIT_LIST_HEAD(&ar->rx_data_used);
+ spin_lock_init(&ar->rx_data_list_lock);
+
+ ar->wq = create_singlethread_workqueue("ar5523");
+ if (!ar->wq) {
+ ar5523_err(ar, "Could not create wq\n");
+ goto out_free_ar;
+ }
+
+ error = ar5523_alloc_rx_bufs(ar);
+ if (error) {
+ ar5523_err(ar, "Could not allocate rx buffers\n");
+ goto out_free_wq;
+ }
+
+ error = ar5523_alloc_rx_cmd(ar);
+ if (error) {
+ ar5523_err(ar, "Could not allocate rx command buffers\n");
+ goto out_free_rx_bufs;
+ }
+
+ error = ar5523_alloc_tx_cmd(ar);
+ if (error) {
+ ar5523_err(ar, "Could not allocate tx command buffers\n");
+ goto out_free_rx_cmd;
+ }
+
+ error = ar5523_submit_rx_cmd(ar);
+ if (error) {
+ ar5523_err(ar, "Failed to submit rx cmd\n");
+ goto out_free_tx_cmd;
+ }
+
+ /*
+ * We're now ready to send/receive firmware commands.
+ */
+ error = ar5523_host_available(ar);
+ if (error) {
+ ar5523_err(ar, "could not initialize adapter\n");
+ goto out_cancel_rx_cmd;
+ }
+
+ error = ar5523_get_max_rxsz(ar);
+ if (error) {
+ ar5523_err(ar, "could not get caps from adapter\n");
+ goto out_cancel_rx_cmd;
+ }
+
+ error = ar5523_get_devcap(ar);
+ if (error) {
+ ar5523_err(ar, "could not get caps from adapter\n");
+ goto out_cancel_rx_cmd;
+ }
+
+ error = ar5523_get_devstatus(ar);
+ if (error != 0) {
+ ar5523_err(ar, "could not get device status\n");
+ goto out_cancel_rx_cmd;
+ }
+
+ ar5523_info(ar, "MAC/BBP AR5523, RF AR%c112\n",
+ (id->driver_info & AR5523_FLAG_ABG) ? '5' : '2');
+
+ ar->vif = NULL;
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_HAS_RATE_CONTROL;
+ hw->extra_tx_headroom = sizeof(struct ar5523_tx_desc) +
+ sizeof(struct ar5523_chunk);
+ hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ hw->queues = 1;
+
+ error = ar5523_init_modes(ar);
+ if (error)
+ goto out_cancel_rx_cmd;
+
+ usb_set_intfdata(intf, hw);
+
+ error = ieee80211_register_hw(hw);
+ if (error) {
+ ar5523_err(ar, "could not register device\n");
+ goto out_cancel_rx_cmd;
+ }
+
+ ar5523_info(ar, "Found and initialized AR5523 device\n");
+ return 0;
+
+out_cancel_rx_cmd:
+ ar5523_cancel_rx_cmd(ar);
+out_free_tx_cmd:
+ ar5523_free_tx_cmd(ar);
+out_free_rx_cmd:
+ ar5523_free_rx_cmd(ar);
+out_free_rx_bufs:
+ ar5523_free_rx_bufs(ar);
+out_free_wq:
+ destroy_workqueue(ar->wq);
+out_free_ar:
+ ieee80211_free_hw(hw);
+out:
+ return error;
+}
+
+static void ar5523_disconnect(struct usb_interface *intf)
+{
+ struct ieee80211_hw *hw = usb_get_intfdata(intf);
+ struct ar5523 *ar = hw->priv;
+
+ ar5523_dbg(ar, "detaching\n");
+ set_bit(AR5523_USB_DISCONNECTED, &ar->flags);
+
+ ieee80211_unregister_hw(hw);
+
+ ar5523_cancel_rx_cmd(ar);
+ ar5523_free_tx_cmd(ar);
+ ar5523_free_rx_cmd(ar);
+ ar5523_free_rx_bufs(ar);
+
+ destroy_workqueue(ar->wq);
+
+ ieee80211_free_hw(hw);
+ usb_set_intfdata(intf, NULL);
+}
+
+#define AR5523_DEVICE_UG(vendor, device) \
+ { USB_DEVICE((vendor), (device)) }, \
+ { USB_DEVICE((vendor), (device) + 1), \
+ .driver_info = AR5523_FLAG_PRE_FIRMWARE }
+#define AR5523_DEVICE_UX(vendor, device) \
+ { USB_DEVICE((vendor), (device)), \
+ .driver_info = AR5523_FLAG_ABG }, \
+ { USB_DEVICE((vendor), (device) + 1), \
+ .driver_info = AR5523_FLAG_ABG|AR5523_FLAG_PRE_FIRMWARE }
+
+static struct usb_device_id ar5523_id_table[] = {
+ AR5523_DEVICE_UG(0x168c, 0x0001), /* Atheros / AR5523 */
+ AR5523_DEVICE_UG(0x0cf3, 0x0001), /* Atheros2 / AR5523_1 */
+ AR5523_DEVICE_UG(0x0cf3, 0x0003), /* Atheros2 / AR5523_2 */
+ AR5523_DEVICE_UX(0x0cf3, 0x0005), /* Atheros2 / AR5523_3 */
+ AR5523_DEVICE_UG(0x0d8e, 0x7801), /* Conceptronic / AR5523_1 */
+ AR5523_DEVICE_UX(0x0d8e, 0x7811), /* Conceptronic / AR5523_2 */
+ AR5523_DEVICE_UX(0x2001, 0x3a00), /* Dlink / DWLAG132 */
+ AR5523_DEVICE_UG(0x2001, 0x3a02), /* Dlink / DWLG132 */
+ AR5523_DEVICE_UX(0x2001, 0x3a04), /* Dlink / DWLAG122 */
+ AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */
+ AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */
+ AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108
+ (CyberTAN Technology) */
+ AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */
+ AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */
+ AR5523_DEVICE_UG(0x0d8e, 0x7802), /* Globalsun / AR5523_3 */
+ AR5523_DEVICE_UX(0x0846, 0x4300), /* Netgear / WG111U */
+ AR5523_DEVICE_UG(0x0846, 0x4250), /* Netgear / WG111T */
+ AR5523_DEVICE_UG(0x0846, 0x5f00), /* Netgear / WPN111 */
+ AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / AR5523_1 */
+ AR5523_DEVICE_UX(0x157e, 0x3205), /* Umedia / AR5523_2 */
+ AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / TEW444UBEU */
+ AR5523_DEVICE_UG(0x1435, 0x0826), /* Wistronneweb / AR5523_1 */
+ AR5523_DEVICE_UX(0x1435, 0x0828), /* Wistronneweb / AR5523_2 */
+ AR5523_DEVICE_UG(0x0cde, 0x0012), /* Zcom / AR5523 */
+ AR5523_DEVICE_UG(0x1385, 0x4250), /* Netgear3 / WG111T (2) */
+ AR5523_DEVICE_UG(0x1385, 0x5f00), /* Netgear / WPN111 */
+ AR5523_DEVICE_UG(0x1385, 0x5f02), /* Netgear / WPN111 */
+ { }
+};
+MODULE_DEVICE_TABLE(usb, ar5523_id_table);
+
+static struct usb_driver ar5523_driver = {
+ .name = "ar5523",
+ .id_table = ar5523_id_table,
+ .probe = ar5523_probe,
+ .disconnect = ar5523_disconnect,
+};
+
+static int __init ar5523_init(void)
+{
+ return usb_register(&ar5523_driver);
+}
+
+static void __exit ar5523_exit(void)
+{
+ usb_deregister(&ar5523_driver);
+}
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_FIRMWARE(AR5523_FIRMWARE_FILE);
+
+module_init(ar5523_init);
+module_exit(ar5523_exit);
--
1.7.9.5